Best Hydraulics in 2026

2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps

Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve

The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241

Bore 2" (OD 2.38"), Stroke 24 inch, Rod 1.25", Retracted 34", Extended 58", Pin holes 1"

Ports SAE 6 (O-ring boss), Pressure 3500 PSI, Column Load 8,400 LBs, welded hydraulic cylinder

This Swivel Eye Universal hydraulic cylinder is a perfect replacement for mobile equipment

Bore 4" (OD 4.5"), Stroke 24", Rod 2", Retracted 34.25", Extended 58.25", Pins 1" included

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 36,000 LBs, welded hydraulic cylinder

This clevis universal hydraulic cylinder is a perfect replacement for any agriculture equipment

2 Sets, These Universal Quick Disconnect Coupler & Plug sets feature a new improved design for high flow performance and maximum service life.

3/4" SAE (1-1/16"-12 ORB) Thread, 1/2" ISO Body, These flat face couplers interchange with most models of skid steers loaders including Compatible with Bobcat, John Deere, Case / New Holland, Kubota, and many others

Heavy Duty Design with 5076 PSI Rating - 23.78 GPM Max Flow Rate

Used Book in Good Condition

128 FITTINGS---This 64-pc. JIC & 64-pc. ORFS hydraulic cap and plug kit give you plenty of fittings in the 6 most commonly needed sizes----04, -06, -08, -10, -12, -16 and ORFS 4, 6, 8, 10, 12, 16 .

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These fittings are used in a test-point and diagnostic setting. They are most commonly used in fluid power and fuel delivery applications, especially those using high pressure

【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap

【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock

【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure

Features a tearproof, long-life inner gasket compared to ordinary cork-gasketed hydraulic caps.

Chrome plated exterior surface.

It is closed by turning a quarter turn with bayonet type locking. Mounting flange and 3 pcs M5x10 screws are included.

Hydraulic Dust Cap Keeps your couplers clean and protect hydraulics from components with quick coupler connections

The dust covers perfectly Fits ISO A 7241+IOS 5675

Ripstop design, red molded material, durable and elastic

Boost your Bull-Work Efficiency: The VEVOR porta power kit with a 4-ton hydraulic pump is the ultimate heavy-lifter you need for all your repair needs. The automatic overload system prevents any damage to the equipment or rams, while the hydraulic spreader with a 1/2 ton capacity makes all your repairs a breeze. Get your hands on this powerhouse today!

Leak-Proof and Rust-Proof: No more worries about oil leakage or rusting with the TPU seal and electrostatic powder spraying. The porta power kit is designed to provide sufficient working pressure while ensuring a long-lasting finish. The paint is resistant to oil, grease, and dirt, making cleaning easy even after extensive use.

Perfect for All Your Needs: The portable hydraulic ram kit includes everything you need to complete your repair work! Hydraulic pump, hydraulic ram, 4pcs extension tubes, serrated saddle, rubber head, V-shaped head, wedge head, connector, flat base, hydraulic spreader, spreader ram toe, plunger toe. You will be ready to take on any project without breaking a sweat.

【Universal Compatibility】 Hydraulic Seal Installer is a quick and safe installation tool for flexible rod seals. 3 sizes to cover most rod seal installation job from 0.87" up (Rod Diameters): (S) 22-40mm (0.87"-1.57" Rod) gland hole ; (M) 40-70mm (1.57-2.75" Rod) gland hole; (L) 70-165mm (2.75"-6.49" Rod) gland hole.

【Efficient Work】 Fast and simple to install, impossible to mess up. Simply put the seal in it in seconds, smoothly rotate the arm of Hydraulic tool to bend the seal to a Kidney Bean shape and insert the seal to the cylinder groove. Efficiently save you time and effort to complete seal installation work.

【Expertly Made & Superior Quality】 Upgraded comfortable rubber handle cover design to avoid slippage. 3 different colors for easy identification of different sizes. Strong welds and and well-polished edges provide smooth operation and great protection for both seal and cylinder.

This solenoid operated valve multiplies your existing Hydraulic Outlets and allows you to control 2 circuits from the lever in your cab. It works on all ISO Hydraulic Systems and is easily transferable to multiple units.Save money versus expensive factory add-ons!

Allows tractor float operation on selected circuits.Works with Double or Single Acting Cylinders.Can be used on Open, Closed or FPC hydraulic systems.Capacity for up to 20 GPM Hydraulic Flow & 3000 PSI Hydraulic Systems.12 Volt DC is required to operate the Electric Solenoids. 24 Volt coils are also available.

Heavy duty chemical and weatherproof Solenoid Valves.Anodized body provides long lasting protection from corrosion.

Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 15-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down.

Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It includes a 15 ft remote control and two additional SAE#6 connectors are provided for replacement.

Reliable Quality: The dump trailer pump is made of sturdy metal; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it avoids overpressure, safer and reliable.

This welded clevis hydraulic cylinder is a double-acting powerhouse for use in agriculture, construction, forestry, and other industrial lifting applications. Makes for an excellent heavy-duty replacement for hydraulic systems and farming equipment.

Shaft is hardened 50-55 rockwell C (industrial grade). Chrome plated/polished finish maximizes seal life, to ensure this low-maintenance cylinder is the only one you'll ever need.

Cylinder tube is precision crafted out of honed steel. Standard inline ports, parallel to pin. Fitted with industry-superior quality sealing, thats made to last.

This tie-rod hydraulic cylinder is a double-acting powerhouse for use in agriculture, construction, forestry, and other industrial lifting applications. Makes for an excellent heavy-duty replacement for hydraulic systems and farming equipment.

Rod is hardened 50-55 Rockwell C (industrial grade). Chrome plated/polished finish maximizes seal life, to ensure this low-maintenance cylinder is the only one you'll ever need.

Cylinder tube is precision crafted out of honed steel. Tie-rods are high tensile strength with rolled threads for durability. Fitted with industry-superior quality sealing, thats made to last.

This welded cross tube hydraulic cylinder is a double-acting powerhouse for use in agriculture, construction, forestry, and other industrial lifting applications.

Shaft is hardened 50-55 rockwell C (industrial grade). Chrome plated/polished finish maximizes seal life, to ensure this low-maintenance cylinder is the only one you'll ever need.

Cylinder tube is precision crafted out of honed steel. Makes for an excellent heavy-duty replacement for hydraulic systems and heavy equipment.

This welded swivel mount hydraulic cylinder is a double-acting powerhouse for use in agriculture, construction, forestry, and other industrial lifting applications.

Shaft is hardened 50-55 rockwell C (industrial grade). Chrome plated/polished finish maximizes seal life, to ensure this low-maintenance cylinder is the only one you'll ever need.

Cylinder tube is precision crafted out of honed steel. Makes for an excellent heavy-duty replacement for hydraulic systems and heavy equipment.