Best Legines in 2026

Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Gasket and nut for air tight seal through bulkhead

Female coupler for connecting NPT fittings through a bulkhead

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Washer and nut for air tight seal through bulkhead

Hex bushing for connecting two pipes with different diameters

1/4" Male NPT threads on one end and 1/8" female NPT threads on the other for connecting pipes with different ends

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Union coupling for connecting two hoses with the same diameter in a straight run

Connects to a hose on both ends

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Hex nipple for connecting two threaded pipes or fittings and extending pipe length

1/8" Male NPT threads for connecting to 1/8" female threaded pipes

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Hex plug with SAE 45-degree flare male end terminates tube size fitting

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

Hex plug with SAE 45-degree flare male end terminates tube size fitting

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

Hex plug with SAE 45-degree flare male end terminates tube size fitting

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

Coupling for connecting two pipes with the same diameter in a straight run

3/8" Female National Pipe Taper (NPT) threads for connecting to 3/8" male threaded pipes.

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Reducing adapter allows for connecting and extending different size pipes or fittings, can be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools

1/4" Male National Pipe Taper (NPT) threads on one end and 3/8" female NPT threads on the other for connecting pipes with different ends

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Reducing Coupling for connecting two different size male threaded pipes

1/4" Female National Pipe Taper (NPT) threads on one end and 1/8" on another end.

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing

High Pressure Resistance,Temperature Resistance

Sealability and good repeatability,Easy to disassemble no flaring tool required

Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing

Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.

Use with copper,aluminum and thermoplastic tub-ing.Not recommended for steel tubing.

90-degree elbow for connecting two pipes or fittings at an angle

Male National Pipe Taper (NPT) threads for connecting to female threaded pipes

Forged brass for corrosion resistance, ductility at high temperatures, and durability

Adapts NPT male end to tube female end at a 90-degree angle.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.

Adapter for connecting pipes or fittings of different types

Fitting connects to tubing on one end and has an NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Contain common air brake fitting styles

D.O.T Union:1/4"(4 pcs), 3/8"(4 pcs), 1/2"(4 pcs), 5/8"(2 pcs)

D.O.T Tee:1/4"(2 pcs), 3/8"(2 pcs), 1/2"(2 pcs); Bushing: 3/8" NPT Female x 1/2" NPT Male(2 pcs)

Long nipple for connecting two threaded pipes and extending pipe length

1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes

Brass for higher corrosion resistance, ductility at high temperatures, and low magnetic permeability

45-degree elbow for connecting hose to threaded pipe at an angle Fitting connects to hose on one end and has an NPT male connector on

Fitting connects to hose on one end and has an NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

45-degree elbow for connecting hose to threaded pipe at an angle Fitting connects to hose on one end and has an NPT male connector on

Fitting connects to 3/8" I.D. hose on one end and has an 3/8" NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Union connect two tube with same 1/4" OD.

Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places

Meets D.O.T FMVSS 571.106 ,CMVSS106 and SAE J1131 Air Brake system Requirements

Tee with three openings for connecting and branching three pipes

1/2" Female NPT threads on the main run and 1/2" male NPT threads on the branch for connecting three threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

90-degree elbow for connecting hose to threaded pipe at an angle Fitting connects to hose on one end and has an NPT male connector on

Fitting connects to 1/2" I.D. hose on one end and has an 1/4" NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Union pipe fitting for joining two pipes.

1/4" Female NPT threads for connecting to 1/4" male threaded pipes

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

Cap for terminating male pipe or fitting.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

Kit contains 6sizes: 1/8"(2 pcs), 3/16"(10 pcs), 1/4"(4 pcs), 5/16"(2 pcs), 3/8"(2 pcs) and 1/2" (2 pcs)compression coupling, total 22pcs.

Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems.

This compression union assortments are designed for specialty and general repair shops.

Three piece construction - nut, sleeve and body with attached insert

Standard fittings use short nuts，Easy to disassemble no flaring tool required

Easy to disassemble no flaring tool required

45-degree elbow for connecting hose to threaded pipe at an angle Fitting connects to hose on one end and has an NPT male connector on

Fitting connects to 3/8" id hose on one end and has an 1/4" NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

128 FITTINGS---This 64-pc. JIC & 64-pc. ORFS hydraulic cap and plug kit give you plenty of fittings in the 6 most commonly needed sizes----04, -06, -08, -10, -12, -16 and ORFS 4, 6, 8, 10, 12, 16 .

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These fittings are used in a test-point and diagnostic setting. They are most commonly used in fluid power and fuel delivery applications, especially those using high pressure

D.O.T. Compression style fittings for repairing truck and trailer air brake lines.

For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements.

Ribbed sleeve for compression and positive grip.