Best Torin Pump Jacks in 2026

Product 1: Includes 9-pc. 1 in. drive deep 6-pt. impact sockets: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in.; Metal storage case

Product 1: Designed for use with impact wrenches

Product 1: High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off

Foot activated pump pedal for hands free raising of the rams

Extended to reach a maximum height of 74 inches

Lowered telescopic rams enable the transmission to be transferred from the jack to the work table

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use

Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity; Clevis style base provides added versatility

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength; Fits most garage/shop cranes, engine hoists, and more

Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically

Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Product 1: Four leg steel base

Product 1: Made of heavy schedule pipe for added strength and stability

Product 1: Quick and easy height adjustment.Base Length:38.27 inch

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity; Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base enhances stability and strength; Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches

Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability; Inner/outer welded structure delivers leak-free performance

Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches.

A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety.

This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another.

[Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks.

[Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is.

[Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time and energy.

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Product 1: QUICK/ EASY: quickly inflates tire sidewall to seat the bead onto wheel rim for all tires up to 24.5”, including regular vehicles, trucks, tractors, RVs, ATVs and more

Product 1: CE APPROVED: heavy duty CE approved all steel construction tank with powder coating finish for durability

Product 1: EASY TO READ GAUGE: accurately fill the tank from standard shop compressor at recommended operating pressure of 87-116 PSI with the included easy-to-read gauge

STRONG: Built to meet or exceed ANSI and PALD standards for construction, durability and performance

VERSATILE: Works on a huge range of vehicles, with a lift range from a low 3 inches to a high 19-1/2 inches

FAST: Save time working on vehicles thanks to dual-piston quick-lift pump that raises the unloaded lift arm to full height in 7 pumps

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-1/4" to 15-15/16" with a 6 ton (12,000 lb) capacity; Has a lifting height of 4-15/16" and an adjustable screw top extension that adds an additional height of 2-3/4"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

[100% LIGHTWEIGHT ALUMINUM] - Weighs only 58 pounds which is lightweight for easy portability.

[DUAL PUMP PISTONS] - Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 3/4" - 19 1/4"

[VEHICLE PROTECTION] - Designed with a foam handle bumper to protect vehicle from damage

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

This air hydraulic bottle jack has 5 Ton (10,000 LBs) and lift range is from 8-1/4" to 16-15/16". Working air pressure ranges from 100 to 175 PSI.

This pneumatic bottle jack is equipped with metal nozzle which has filtering function to remove impurities, increases air flow speed and efficiency.

The four corner air pump with up to 5000 cycles and a stronger air tube built-in iron core increase the services life of this bottle jack.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

⚠Note:①Be sure to use the jack on a flat and firm ground.②Do not get too close to the car when the floor jack is working.③Do not use the electric jack to raise vehicles over 5 tons. How to use it? 👉Step 1: Connect the cigarette lighter or car battery to get power. Step 2: Place the electric jack in an appropriate location and manually rotate the head anticlockwise. Step 3: Press the (^) button to lift the car and the (v) button to lower it.

Secure Choice for Most Vehicles: The electric car jack has equipped with a large base and a sturdy saddle, the entire jack body is made of high-strength heavy duty steel, stable and secure enough for most vehicles under 5T. Meanwhile, the pre-designed automatic power-off system enables our jack to stop working the moment when it reaches the max. height. Besides, the internal circuit breaker of the jack will protect your car from overload and toppling over suddenly.

Built-in Tire Inflator: An electric inflator is necessary to help with completing the tire change process by inflating a new tire quickly. This hydraulic jack kit is featured by the design that integrates jack with inflation pump. How to use the inflator function? ①Connect the cigarette lighter to get power.②Connect the Air Tube to the Nozzle and Tighten the Nozzle Nut. ③Press the Inflation Switch and check the display. (Do not Over Inflate).

[Durable Material and Portable] Heavy Duty floor jack with sturdy adopt a thick drop forged alloyed welded steel construction.Compact and nice car lifts are portable in the vehicle truck so as to get ready for emergencies

[Capacity]Floor jack can lift up to 1.5 tons 3300 lbs with a lifting range height of 5.31"min to 13.2"max.Dimensions:18.3" x 7.7" x 5.3".Floor jack is used for most Sedans,suv,automotive

[360 degree Flexible Swivel Casters &Rotating Saddle]Car jack is equipped with steel front caster and all the rear wheel,flexible and easy to move.Single piston quick lift pump let the hydraulic trolley jack raise desired height more smoothly and quickly

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles

√4 IN 1 ELECTRIC HYDRAULIC JACK: The electric car jack must be used on a FLAT and FIRM ground! This 4 in 1 electric hydraulic jack comes in an electric hydraulic jack, an air pump and an impact wrench. The electric car jack is capable of lifting car(under 5 ton) up to reach its max height(height range:5.9~17.7 inch) within 2 minutes

NOTES FOR USING ELECRIC IMPACT WRENCH: First: Paying attention to the sizes when selecting the sleeve; Second: The signal "II" means loosening the screw, and you have to keep pressing "II" until the screw has been loosened.The signal"I" means tightening the screw, and you have to keep pressing "I" until the screw has been tightened

√SAFE AND SECURE TO USE:Our electric hydraulic jack is will automatically stop working after reaching the height limit.The electric car jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

Low profile car jack design allows for lift range from 8.5 inches to 23 inches. Slow controlled lowering of load by a conveniently located release valve knob.

1000 LBS capacity to help remove and install most transmissions from cars and trucks. Safety overload system prevents the floor jack from being used beyond its capacity.

Versatile saddle design allows for total adjustments in every direction. Pump handle rotates 360° for operation from any direction.