Best Atv Transmission Jacks in 2026

Extends up to a 14" height

Easily hand-operated using 7/8" socket or wrench (sold separately) - Do not use an impact wrench or powered drill to operate the lift

Durable rubber padding on platform

Foot activated pump pedal for hands free raising of the rams

Extended to reach a maximum height of 74 inches

Lowered telescopic rams enable the transmission to be transferred from the jack to the work table

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a red and black powder-coated finish; The paint coating is oil, grease, and rust-resistant, which is much easier to clean up after repairs

ANTI-SLIP DESIGN - The stand’s top surface has a durable rubber pad with striped pattern to help prevent slippage and scratches; The wide top platform measures 14.4" x 9", which has a large contact area with the motorcycle to raise and lower it steadily

MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this jack; The portable design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

Solid steel construction in a blue and black powder coated finish

Simple crank operation

Designed to fit most motorcycle models

OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road

Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches

Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier

[Capacity]Scissor lift jack max load 1.5 ton (3,300lb) capacity.Lifting height range from 3.7"to 15.4".Total length:17.7";Weight:7.3lb

[Durable Material]Scissor jacks for car adopt welded forged steel construction to ensure durabilty,solid and corrosion-resistant.The design of the large tray at the bottom can perfectly adapt to uneven roads.Comes in handy in emergency tire servic

[Wide Use ]1.5 ton scissor jack fit for most family cars of less than 1.5 tons,such as SUV,MPV,travel trailer,station wagon,mini bus,RV.Collapsible jack can save storage spare of trunk.Portable jack can be an emergency roadside kit for car when long distance,quickly and easily make a change in case of flat tire

【Solid and Durable Design】1,500 pounds of lift capacity, solid high-grade steel construction with black and red powder coated finish which protects the stand from rust and corrosion.

【Motorcycle Easy Lift】Allows easy and controlled lifting of your off-road motorcycle, perfect for repair, maintenance, and storage.

【Adjustable Height】Fully adjustable deck height, lifting small vehicles up to 17 3/8" high allows it perfect fit for most bikes and safety lock with multiple locking positions for safety ensurance.

【Strong and powerful】This motorcycle lift jack boasts solid steel construction with a lifting capacity of 1200lb, making it sturdy and reliable for lifting heavier bikes.

【Stable and secure】The extra wide platform measures 9.06” x 14.57” and provides a larger contact area with the motorcycle. The high-quality rubber pad helps prevent your motorcycle from slipping or sliding while being lifted.

【Durable and lasting】The solid steel structure of the motorcycle lift jack is coated with a black powder finish that is oil-resistant, grease-resistant, and dirt-resistant, ensuring durability and longevity.

Solid steel construction in a red and black powder coated finish

Two (2) variable screw adapters

Simple crank operation

[Powerful Electric Car Jack] E-HEELP electric car jack is hydraulic driven, enabling it to lift vehicles weight less than 5 tons (11023 lbs) and only takes less than 2 mins to lift to its MAX height. The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV and truck. The powerful hydraulic strenth is more competitive than an other car jacks.

[Universal Applied] Car jack hydraulic has two ways of power supply: battery clip with 12V DC power socket and car cigarette lighter. The high-power motor nearly matches all the vehicles in the market, sedan, SUV, MPV, truck, pickup. Morever, you can use the car jack on your motorcycle, or some other heavy items. Please make sure you operate carefully on the flat ground and the load weight never exceed its MAX.

[Easy Pumping] With a tire inflator pump installed in the electric car jack, no need to worry about the tire-broken emergency in the middle of nowhere. Equipped with tire pressure display, you can monitor the tire pressure while pumping. Now, Say goodbye to troublesome tire-changing things!

Ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs

Features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity. Operation Type: Hydraulic.

Equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar

Foot-operated pedal instead of hand-operation, for more security and labor-saving manipulation, and lifting pump allow mechanic to position and align the transmission. Suitable for installation or removal of most transmissions from car or light truck.

Rated Load: 1322 lbs (0.6ton); Lowered Height: 34"; Raised Height: 68" (+/-2"). Adjustable lift height range from 34" to 68" for different occasions.

Comes with great lift range telescopic two-stage hydraulic ram. Telescopic dual stage hydraulic ram for improving lift range. 2-way tilt transmission carriage complete with safety chains.

Design fits cars, trucks, motorcycles, ATVs, even transmissions.

From a low of 4-3/4 in. to a high of 17 in., you are able to lift almost any vehicle.

The wide wheelbase offers stability well beyond the average floor jack.

Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely

Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle

Lift height from 13-1/2 inches (min height) to 36 inches (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle

PREMIUM QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a black powder-coated finish; The paint coating is oil, dirt, and rust-resistant, which is much easier to clean up after repairs and extends its service life

LARGE & ANTI-SLIP PLATFORM - The top surface measures 14.6"×9", it is large enough to raise and lower a transmission or a motorcycle; It is designed with a durable rubber pad with striped veins, which has a large contact area with your motorcycle and help to avoid slippage and scratching

MOVABLE & VERSATILE APPLICATION - The lift jack with dolly tray which has 4 steel casters can be easily move anywhere; It fits transmission and most motorcycle models like cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc.; The portable design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

1/2 ton capacity pedestal transmission jack with 49.6 inches to 68.7 inches high lift range

Durable steel and dipped enamel finish

Designed to use with in-ground and above-ground lifts and easy to remove or install any transmission from car or light truck, manual or automatic

Load capacity: 4409lbs(2000kg/2T). !!!! Just for Tire Change, don't be under the car and remenber to set p gear at firsrt!!!!!

Maximum height of 15”, Retracted height 4.1”, weld-on installation. Please stay the srew rod always has oil before you use, otherwise it will hurt scissor jack.

Fits for smaller to medium vehicle, eg: pop-ups, trailers, campers motorhomes and rvs.

【Solid Steel Structure】Our motorcycle lift jack is made of heavy-duty steel,it's strong and durable,with a max load capacity of 1200 lbs,which is very powerful,also with red and black powder-coated finish.

【Laboursaving】In addition to the crank handle,we also have an extra ratchet wrench,which is easier to use than crank handle,you will spend less effort to lift the motorcycle up quickly.

【4.13"-14.96" Lifting Height】This motorcycle lift jack has a lifting height range of from 4.13" to 14.96".With a max load capacity of 1200 lbs,it can lift most motorcycles,snowmobiles,ATVs,UTVs,street bikes,etc.It's suitable for use in multiple locations such as repair shops,garages and race tracks.

CAPACITY: 1/2 ton; Transmission adapter for the removal and installation of passenger car and light duty truck transmissions.Fit Type: Universal Fit

EASY ADAPTIBILITY: Vehicle lifter attachment converts floor jacks into transmission jacks; Ideal for VW Beetle engine removal with rear engine placement

COMPATIBILITY: Fits all floor jacks with 1-5/32” removable saddle shaft

1322 LBS Loading Capacity: Our 1322 lbs / 0.6 ton 2-stage hydraulic telescoping transmission jack helps you easily guide a transmission securely. Great for any automotive or light truck transmission installation or removal. See where the problem is and solve it with a quality transmission jack.

33-1/2" -67" Lifting Range: Enhanced hydraulic pressure for an extended lifting range, the pedestal transmission jack with a 33-1/2 inch to 67 inch lift range, our jack can lift your car to any suitable height. Comes with a foot-operated pedal, so it's easier to rise, and free up your hands.

Precise Positioning: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done.

Universal saddle with four ratcheting arms quickly adjust to the transmission pan configuration

Two caster wheels have locking feature to prevent jack from moving

Foot-activated pump pedal for hands-free raising of the rams

Brand:HTTMT

Version 2.0, functional upgraded with dual spring, higher pressure, increased the stability and load capacity,as well as the lift speed than single spring

This is our newest 1300LBS / 0.6T Upgraded Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal.

Brand: HTTMT

This is our 1100LBS Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal.

Suitable for Any automotive or light truck transmission installation or removal

Made in the USA

Adjustable head for pan configurations

Load restraint chain

Exceeds Industry Standards

Precision Manufacturing

Improved Design Standards

Universal mounting head with adjustable brackets tilts front to back and side to side

Safety chains hold the load securely even while moving about the shop

Wide wheel base with four swivel casters and two handle grips makes it easy to position under the vehicle

Frame is constructed of high-grade steel and built to exacting standards for quality and durability

 Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust

Paint is oil, grease and dirt-resistant for easy cleanup

Load capacity: 1100 lbs

The lifting height ranges: from 3.8" to 15", which is high to accommodate most types of motorcycles or ATVs on the market.

Large & Anti-slip Platform: Large Size: 14.6" X 9" & Rubber pad with stripe texture.

Air turbo motor, compact yet powerful, is equipped to raise the load to the desired height efficiently effortlessly and safely. US patent number: 5,341,723

Two-stage chrome-plated rams maximize its high reach operated by a user-friendly foot pedal

Adjustable saddle for quick adjustment for most pan configurations