Best Cxrcy in 2026

【High Quality Materials】This torque converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.

【Widely Fitment&With 2 Sprockets】Fits all engines with a 1'' straight crankshaft, Go Karts 30 series and 2HP-7HP engine with 1 inch shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 tooth sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.

【Widely Fitment&With 2 Sprockets】Fits all engines with a 1'' straight crankshaft, Go Karts 30 series and 2HP-7HP engine with 1 inch shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 tooth sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.

【Monstrous Winching Power】: A 2.0 HP motor, a full metal 3-stage planetary gear system and a permanent magnet motor guarantee reliable pulling muscle against any harsh conditions and ensure faster line speed under load.

【Intrepid From Inside】: Equipped with a gear reduction ratio of 158:1 and a differential planetary gear train, this ATV/UTV winch is born with stronger pulling capacity.

【Dual Remote Control】: This wireless winch comes with the dual remote control mode, including 25 meters of wireless control, and features an upgraded steel wire rope that is more than 10 times stronger than traditional ones.

【Solid Steel Structure】Our motorcycle lift jack is made of heavy-duty 201 steel,it's strong and durable,With a max load capacity of 1200 lbs,which is very powerful,also if you like the natural color of stainless steel,this one will be a good choice.

【Equipped with Ratchet Wrench】In addition to the crank handle,we also have an extra ratchet wrench,which is easier to use than crank handle,you will spend less effort to lift the motorcycle up quickly.

【4.13"-14.96" Lifting Height】This motorcycle lift jack has a lifting height range of from 4.13" to 14.96".With a max load capacity of 1200 lbs,it can lift most motorcycles,snowmobiles,ATVs,UTVs,street bikes,etc.It's suitable for use in multiple locations such as repair shops,garages and race tracks.

【Solid Steel Structure】Our motorcycle lift jack is made of heavy-duty steel,it's strong and durable,the max lifting load is 1200 lbs,which is very powerful,with chrome plating finish,bright and smooth surface makes it look elegant.

【Equipped with Ratchet Wrench】In addition to the crank handle,we also have an extra ratchet wrench,which is easier to use than crank handle,you will spend less effort to lift the motorcycle up quickly.

【4.13"-14.96" Lifting Height】This motorcycle lift jack has a lifting height range of from 4.13" to 14.96".With a max load capacity of 1200 lbs,it can lift most motorcycles,snowmobiles,ATVs,UTVs,street bikes,etc.It's suitable for use in multiple locations such as repair shops,garages and race tracks.

【Solid Steel Structure】Our motorcycle lift jack is made of heavy-duty steel,it's strong and durable,with a max load capacity of 1200 lbs,which is very powerful,also with red and black powder-coated finish.

【Laboursaving】In addition to the crank handle,we also have an extra ratchet wrench,which is easier to use than crank handle,you will spend less effort to lift the motorcycle up quickly.

【4.13"-14.96" Lifting Height】This motorcycle lift jack has a lifting height range of from 4.13" to 14.96".With a max load capacity of 1200 lbs,it can lift most motorcycles,snowmobiles,ATVs,UTVs,street bikes,etc.It's suitable for use in multiple locations such as repair shops,garages and race tracks.

【Quality Material 】-CXRCY 0.8L ultrasonic cleaner is made of 201&304 Stainless Steel, which is corrosion resistance and long lifespan, adopt with powerful ultrasonic transducer and advanced adhesive technology, high electro-acoustic conversion efficiency and strong ultrasonic power output.

【Ultrasonic Cleaner Parameters】-Capacity: 0.8L Ultrasonic Power: 35w. Cleaner Frequency: 40Khz. Overall Dimension: 7x4.3x5.1inch. Inner Tank Size: 5.9''x3.5''x2.6''. Cleaning Basket size: 5.35x3.3x1.85inch

【Widely Application】- 0.8L Ultrasonic Cleaner is easy to move and store. There are only few steps , you can get a new things. Pour water, add solution , set time and get brand-new things.Suitable for jewelry, circuit boards, dental equipment, tableware, eyewear, laboratories, industrial and other objects.

【Landscape Edging】This black Steel Landscape Edging includes 6 pack (20 feet total),the size of each piece-Length:40 inch;Height:6.4 inch.

【Heavy Duty,Sturdy&Long Lasting】Using high-quality steel material, the surface adopts black powder coating technology.Compared to other fixing methods,screws can prevent loose and keep fixed for a long time.Our Landscape Edging characterized by anti-corrosion,anti-rust,heavy duty and sturdy,no need to paint and maintenance, easy to clean.

【Easy Installation】Come With 6 Connector Clips,1x set of screws and nuts,you can quickly complete the installation without referring to the installation instructions,and we provide you with a pair of protective gloves,when install it you can wear gloves to protect your hands from scratches.

【12" Distance Between Centers & 8" Swing Over Bed】With large working capacity,our wood lathe can cut many sizes of workpiece ,the maximum length of workpiece is 12 inches and the maximum diameter is 8 inches ,the tailstock is movable,you can adjust the distance freely.

【Infinitely Variable Speed Control 750-3200 RPM】The speed range is 750-3200 revolutions per minute (RPM), adjust the variable speed knob,you can control the speed to any value within this range.

【Equipped with More Tools】Our wood lathe is also equipped with additional tools.The complete product list is:1x benchtop lathe,3 x chisels,1x knockout rod,1 x open end wrench,1 x Allen key,1x4.5-inch tool rest,1x 7-inch tool rest,1x 6-inch faceplate,1x 1 "-8TPI spur center,1x MT1 live center,1x manual.

Recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability

Manufactured to GM OE specification for fit, form, and function

recommended replacement part for your gm vehicle’s original factory component

offering the quality, reliability, and durability

manufactured to gm oe specification for fit, form, and function

【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.

【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life.

【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.

【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.

【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".

Mounting Hardware For 30 Series Drivers.

Includes Metric and Standard Thread bolts & Lock Washer.

For 3/4 Shaft Engines.

Complete 3/4" Torque Converter Set

High Quality Kit Includes: 1 x Drive Belt, 1 x Plastic Cover, 1 x 3/4" Driver Pulley, 1 5/8" Driven Pulley (6" Diameter), 1 x Aluminum Mounting Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1 X 10T Sprocket for #40/41 Chain, 1 x Mounting Hardware Kit

Professional Installation recommended - Terrain/Sand usage might require moving the RED Spring to different location on Driven Pulley Clutch

FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power..Fit Type: Vehicle Specific

30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4" and a 5/8" drive clutch, suitable for all engines with 3/4 "straight crankshaft.The 3/4" drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76", Outside circumference: 27"（68.8cm / 27"), Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6.7"（17cm / 6.7").

UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.

unique engine bolt kit for predator engines and the correct anti vibration pilot washer.

10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter

【High Quality Materials】This torque converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.

【Widely Fitment&With 2 Sprockets】Fits all engines with a 1'' straight crankshaft, Go Karts 30 series and 2HP-7HP engine with 1 inch shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 tooth sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.

【Widely Fitment&With 2 Sprockets】Fits all engines with a 1'' straight crankshaft, Go Karts 30 series and 2HP-7HP engine with 1 inch shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 tooth sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.

Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key

Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation

12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4"(19mm)

12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4"(19mm)

Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key

Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation

Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life.

Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.

Quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.

This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.

Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP

Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.

▲1" Shaft Bore

▲Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range.

▲This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts

Package Include: 1Pc TCC Lock Up Converter Clutch Solenoid.

Interchange Part Numbers: 8654122, 8654124, 8654126, 8654125.

Fits 1982-Up TH700-R4 4L60 4L60E 4L65E TH200-4R Transmission.

30 series driver unit with 1" Bore

1" Bore

1/4" Key way

✔️【PREFECT DESIGNED】Flexplate Adapter Spacer compatible with GM LS series Xtreme Duty Flexplate with a 4mm thick centerplate, to GM automatic transmission For 1998-2004 LS based engines using a TH350 or TH400 transmission.

✔️【STABLE & GOOD DUCTILITY】Crankshaft adapter has good ductility, conduction and thermal conductivity, and has strong ferromagnetic. Stable characteristics, high reliability. Perfect match for the original car.

✔️【EASY INSTALLATION】Ls Adapter sleeves allow you to bolt a GM automatic transmission to an engine or an older GM automatic transmission to an LS-series engine. These adapter sleeves insert into the crankshaft flange with no modifications, giving you the correct distance and pilot size.

40 series torque converter kit replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432.

This torque converter fits 8 - 18 hp engines

Engagement range: 1600 - 3300 RPM

【Introduction】: A direct replacement kit for the go-kart torque converter 30 series. 3/4" shaft bore with 3/16" key way, designed for 6.5hp 212CC engines. Recommended engine 2HP-8HP.

【Applications】: It fits all engines with a 3/4" Straight Crankshaft. Small engine Torque Converter clutches are commonly used in go karts, mini bikes, and lawn mowers.

【Part Number】: Replaces with part numbers 219552A 30 Series Torque Converter Driver Clutch.Comet 219552, Manco 5957, Yerf Dog Q43201W

✅【Replace Part Number】:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75, Yelf Dog Drive Unit Q43201W

✅【Engine Compatability】Fit all engines with a 3/4 inch straight crankshaft,work with small engines producing 2-8hp. Suitable for Go Karts 30 Series

✅【Size】Outside circumference: 27 23/64", Width is 3/4".(1.9cm / 0.75"),Center to Center of driver and driven: 6-15/16 to 7".

30 Series Torque Converter

5/8" Shaft Bore,6" Diameter

Replaces: Comet 219457A,8HP MAX

Replaces stock converter for better launch capability and more strength

Value priced upgrade for mild performance applications and street rods

Stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM)