Best Cprosp in 2026

Load capacity: 1.5T (1500kg/3307lbs) Dimensions:16x3.5x4.1inches (42.5x9x10.5cm).Height height:4.1~15inches (105m~385mm); Net weight: 5.2lbs(2.35kg), Please stay the srew rod always has oil before you use, otherwise it will hurt scissor jack.

The solid base plate also ensures a secure footing, the product can be quite comfortable and easy, folded, carried in the vehicle

It is widely used for smaller to medium vehicles such. B. Pickups, Station Wagon, Van, SUV, Big Van, Mini Bus

★ Material - M42 high speed steel and BI metal, with high wear resistance and high toughness, and higher hardness, increased service life.

★ Convenient and efficient - double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2" electric drill, no restrictions.

★ Chip removal design - side holes around the hole opener are used to remove debris, ensuring smooth cleaning and fast cutting.

★ Material - M42 high speed steel and BI metal, with high wear resistance and high toughness, and higher hardness, increased service life.

★ Convenient and efficient - double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2" electric drill, no restrictions.

★ Chip removal design - side holes around the hole opener are used to remove debris, ensuring smooth cleaning and fast cutting.

★ Size - cutting diameter is 6" / 152mm, opening depth is 1.5" / 38mm

★ Material - M42 high speed steel and BI metal, with high wear resistance and high toughness, and higher hardness, increased service life.

★ Convenient and efficient - double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2" electric drill, no restrictions.

【Clean Hole Cut】: Hole saws are cylindrical cups with a serrated Edge to cut a clean, symmetrical, circular hole.

【High Performance Matieral】: The 155mm hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.

【Safe and Secure】: The spindle structure of the hole saw is firm, and it is not easy to fall off and shake after being fixed.

High-quality material: 304 stainless steel, durable, easy to clean, no rust. The edges are smooth and polished to avoid external infections caused by animal scratches.

Float setting: Use the principle of floating the water level of the float to control the water inlet and outlet switches to achieve a constant water level effect, how much to drink and how much to keep, and to maintain sufficient water volume. The floating ball selection button can adjust the height of the floating ball, control the water level and the amount of water.

Upgraded design: two screw fixing ports at the rear for easy fixing. Connect a standard garden hose (G1/2'' Thread Diameter Pipe) and tighten. Open the faucet and fill the drinking fountain with water, easy to use.

🚗【Load capacity】: 5511 lbs (2500 kg / 2.5T)

🚗【For】: Fits for smaller to medium vehicle, eg: pop-ups, trailers, campers motorhomes and rvs. Please stay the srew rod always has oil before you use, otherwise it will hurt scissor jack.

🚗【Height】: Maximum height of 16.3”, Retracted height 2.5”, weld-on installation.

【The Box Contains】: 5 x Hole Saw Bits, 1 x SDS Plus Connecting Rod, 1 x SDS Max Connecting Rod, 2 x Pilot Drills.

【Cover Different Requirements】: 5 DIFFERENT SIZED - wall hole saws (100mm, 80mm, 65mm, 40mm, 30mm ) are prepared for different cutting diameters, an all-in-one choice for daily use.

【Premium Material】: The hole saw set for cement made of durable tungsten steel and cemented carbide is strong and long-lasting. And it is sturdy enough to drill through hard stone and concrete, Cuts ceramic, plastic, fiberboard, fiberglass, concrete block, and plywood.

❤ Material: The plate bending machine is made of high-quality carbon steel material, heavy-duty steel structure, has the greatest strength and durability, powder coating, anti-rust, and can be used for a long time.

❤ Size: 26 inches (66 cm) long. The U-shaped joist grip bar has a maximum thickness of 1-7 / 8 inches (4.8 cm), and the compression lever allows 90-degree and 45-degree tilt to meet your needs.

❤ Application: This bow-bending tool is designed for deck, fence and mortise-and-groove plywood. Also suitable for woodwork materials such as floor, tongue and groove ceiling, wood board, paneling.

Get extra clearance for your camper, lowered tailgate or bumper mount accessory with this 8" trailer extension. The extender fits a standard 2" shank.

2" trailer hitch has a maximum 500 tongue weight or 5,000 lb. towing capacity.

Rugged steel construction with a corrosion resistant, high gloss black powder coat finish.

the Scissor Jack Socket into your power drill are Simply insert,Works with all 3/4" Hex drive jacks/Scissor Recreational Vehicle Jack Trailer Stabilizers;

Reduces time and effort to raise or lower scissor jack;

Designed to work with 1/4-inch hex quick connect chucks;

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

Reduces time and effort to raise or lower Scissor jacks

Fits 3/8 inch or 1/2 inch power drills

Works with all 3/4 inch hex drive jacks

Reduces time and effort to raise or lower RV scissor jacks.  No need for hand cranks.

¾ hex socket X 1/4-inch hex quick connect shank

Designed to work with 1/4-inch hex quick connect chucks

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).

Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.

Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Minimum height 13.2 in.

Maximum height is 21.5 in.

Sold individually

24 Months Parts Warranty; 1,500LB Heavy Duty

New Butterfly Foot Pedal with Auto Neutral Position (Patent Pending)

Exceptionally Durable E-Coated Black Paint Finish; Durable Powder-Coated Orange Paint Finish

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease

LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches

360 DEGREE ROTATING SADDLE allows for easier movement

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Sturdy and stamped steel construction

High quality cast ductile iron ratchet bar

Height adjustment mechanism allows smooth upward movement while release handles lock into position

Constructed with the sturdy stamped steel with a welded frame design for durability.

Pair of 3 ton jack stands with 6000 pound capacity total (when used together) help support vehicles after lifting with a jack.

Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 11.4" to 16.5".

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 14"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance