Best Amvia in 2026

✅ SPECIFICATION - Maximum lifting weight: 3 Ton (6,600 lbs). Lift operating distance from 4.13 inches to 17.32 inches. Net weight 6.61 lbs (3.00 kg).

✅ SMART MECHANISM - 90% less effort required to lift your vehicle with the innovative ratchet system and 90% less effort required to remove lug nuts with the adjustable lug wrench.

✅ FLAT TIRE REPAIR - For any emergency, this Car Jack Kit will help you change your tire fast and easy. With this kit you will not require anything additional.

✅ SPECIFICATION - Maximum lifting weight: 2.0 Ton (4,400 lbs). Lift operating distance from 4.13 inches to 16.53 inches. Net weight 6.61 lbs (3.00 kg).

✅ SMART MECHANISM - 90% less effort required to lift your vehicle with the innovative ratchet system.

✅ FLAT TIRE REPAIR - For any emergency, this Scissor Jack will help you change your tire fast and easy.

the Scissor Jack Socket into your power drill are Simply insert,Works with all 3/4" Hex drive jacks/Scissor Recreational Vehicle Jack Trailer Stabilizers;

Reduces time and effort to raise or lower scissor jack;

Designed to work with 1/4-inch hex quick connect chucks;

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

Reduces time and effort to raise or lower Scissor jacks

Fits 3/8 inch or 1/2 inch power drills

Works with all 3/4 inch hex drive jacks

Reduces time and effort to raise or lower RV scissor jacks.  No need for hand cranks.

¾ hex socket X 1/4-inch hex quick connect shank

Designed to work with 1/4-inch hex quick connect chucks

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).

Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.

Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Minimum height 13.2 in.

Maximum height is 21.5 in.

Sold individually

24 Months Parts Warranty; 1,500LB Heavy Duty

New Butterfly Foot Pedal with Auto Neutral Position (Patent Pending)

Exceptionally Durable E-Coated Black Paint Finish; Durable Powder-Coated Orange Paint Finish

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease

LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches

360 DEGREE ROTATING SADDLE allows for easier movement

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Sturdy and stamped steel construction

High quality cast ductile iron ratchet bar

Height adjustment mechanism allows smooth upward movement while release handles lock into position

Constructed with the sturdy stamped steel with a welded frame design for durability.

Pair of 3 ton jack stands with 6000 pound capacity total (when used together) help support vehicles after lifting with a jack.

Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 11.4" to 16.5".

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 14"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires

24" max height is versatile and lifts high enough for pick-ups and suv's

Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps

NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a black powder-coated finish; The paint coating is oil, grease, and rust-resistant, making it easier to clean up after maintenance

ANTI-SLIP DESIGN - The top surface of the stand has a durable rubber pad with striped pattern to help prevent slippage and scratches; The wide top platform measures 14.4" x 9", which has a large contact area with the motorcycle to raise and lower it steadily

MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this jack; The compact design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

HEAVY-DUTY SCISSOR JACK: Stromberg Carlson's 24-inch scissor jack is a heavy-duty option that can support up to 5,000 lbs of weight, making it a great choice for RV leveling, trailer stabilization, and camper support.

DURABLE CONSTRUCTION: Made from high-strength steel and coated with an anti-corrosion finish, this scissor jack is built to withstand the elements and resist rust and wear over time.

ADJUSTABLE HEIGHT: This scissor jack can be adjusted to a height of up to 24 inches, providing plenty of flexibility to accommodate different types of RVs, trailers, and campers, and ensure a stable, level platform.

【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.

【Fits most Floor Jacks and vehicles】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

【Size】Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

strength and stable - omega lift 32068 is 6 ton jack stands that are designed to support your vehicle after lifting with a floor jack. it features wide pyramid foot base to provide the added strength and stable support.

sturdy stamped steel - it is constructed with the sturdy stamped steel with a welded frame design for durability. with the lifting range from 16 inches to 23-1/2 inches, it gives you the ability to handle a wide range of vehicles including small cars, suvs, and light duty trucks.

double locking pins - it features double locking pins mechanism. with both handle lock and mobility pin, and a large saddle surface area is designed for better contact with the load being supported, adding the extra safety while working underneath a car.

Fleet and Vehicle Maintenance

Manufacturer: Pro-Lift

Made in: China

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place