Best 5 Transmission Jacks in 2026

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a red and black powder-coated finish; The paint coating is oil, grease, and rust-resistant, which is much easier to clean up after repairs

ANTI-SLIP DESIGN - The stand’s top surface has a durable rubber pad with striped pattern to help prevent slippage and scratches; The wide top platform measures 14.4" x 9", which has a large contact area with the motorcycle to raise and lower it steadily

MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this jack; The portable design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road

Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches

Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

[SOLID CONSTRUCTING & RUST PREVENTION] - Solid steel construction in black powder coated finish which is for oil-resistant, grease-resistant and dirt-resistant. Galvanized treatment accessories to prevent rust.

[NON-SLIP DESIGN] - Wide top surface desk design with a durable rubber pad which has striped veins to prevent slippage and scratching.

[WIDE APPLICATION] - The lift fits most motorcycle models including cruiser bikes, street bikes, adventure touring motorcycles, etc.

[Capacity]Scissor lift jack max load 1.5 ton (3,300lb) capacity.Lifting height range from 3.7"to 15.4".Total length:17.7";Weight:7.3lb

[Durable Material]Scissor jacks for car adopt welded forged steel construction to ensure durabilty,solid and corrosion-resistant.The design of the large tray at the bottom can perfectly adapt to uneven roads.Comes in handy in emergency tire servic

[Wide Use ]1.5 ton scissor jack fit for most family cars of less than 1.5 tons,such as SUV,MPV,travel trailer,station wagon,mini bus,RV.Collapsible jack can save storage spare of trunk.Portable jack can be an emergency roadside kit for car when long distance,quickly and easily make a change in case of flat tire

【Solid and Durable Design】1,500 pounds of lift capacity, solid high-grade steel construction with black and red powder coated finish which protects the stand from rust and corrosion.

【Motorcycle Easy Lift】Allows easy and controlled lifting of your off-road motorcycle, perfect for repair, maintenance, and storage.

【Adjustable Height】Fully adjustable deck height, lifting small vehicles up to 17 3/8" high allows it perfect fit for most bikes and safety lock with multiple locking positions for safety ensurance.

NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a red and black powder-coated finish; The paint coating is oil, grease, and rust-resistant, which is much easier to clean up after repairs; The design with a 3-inch wing on each side of the base strengthens the stand's stability

ADJUSTABLE & SAFE DESIGN - The stand’s top surface has a durable rubber pad with striped pattern to help prevent slippage and scratches; The wide top platform measures 17.7" x 6", which has a large contact area with the motorcycle to raise and lower it steadily; The extra bolt in the package ensure the safety of your motorcycle

MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this jack; The portable design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

【Strong and powerful】This motorcycle lift jack boasts solid steel construction with a lifting capacity of 1200lb, making it sturdy and reliable for lifting heavier bikes.

【Stable and secure】The extra wide platform measures 9.06” x 14.57” and provides a larger contact area with the motorcycle. The high-quality rubber pad helps prevent your motorcycle from slipping or sliding while being lifted.

【Durable and lasting】The solid steel structure of the motorcycle lift jack is coated with a black powder finish that is oil-resistant, grease-resistant, and dirt-resistant, ensuring durability and longevity.

Ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs

Features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity. Operation Type: Hydraulic.

Equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar

Large Loading Capacity: Our electric scissor jack can reach up to a maximum lifting weight of 3 tons (6600 pounds) and a lifting height range of 7.5-16.5 inch(SUV) / 5.5-14.6 inch(Sedan). And will automatically stop working after reaching the height limit.

Automatic & Labor Saving: Easy to operate just by two switches on the remote control. The electric jack can lift the car to its maximum height as short as minutes, more labor-saving than manual jacks. The two-way power supply (battery clip or car cigarette lighter) allows getting power from the car battery. The built-in tire pump will inflate the tire quickly and get your work done.

Professional Tool Box: The red triangle warning sign outside the car lift jack box can be used as a warning road sign when repairing on the highway. The entire box parts are precisely inlaid, and the toolbox tools will not be misplaced. The toolbox ensures neat storage, easy to carry, and can be placed in the car or garage for your convenience.

Design fits cars, trucks, motorcycles, ATVs, even transmissions.

From a low of 4-3/4 in. to a high of 17 in., you are able to lift almost any vehicle.

The wide wheelbase offers stability well beyond the average floor jack.

PREMIUM QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a black powder-coated finish; The paint coating is oil, dirt, and rust-resistant, which is much easier to clean up after repairs and extends its service life

LARGE & ANTI-SLIP PLATFORM - The top surface measures 14.6"×9", it is large enough to raise and lower a transmission or a motorcycle; It is designed with a durable rubber pad with striped veins, which has a large contact area with your motorcycle and help to avoid slippage and scratching

MOVABLE & VERSATILE APPLICATION - The lift jack with dolly tray which has 4 steel casters can be easily move anywhere; It fits transmission and most motorcycle models like cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc.; The portable design can save a lot of space, and you can put the stand in a small and compact space after use, such as a locker, corner, closet, garage, and so on

1/2 ton capacity pedestal transmission jack with 49.6 inches to 68.7 inches high lift range

Durable steel and dipped enamel finish

Designed to use with in-ground and above-ground lifts and easy to remove or install any transmission from car or light truck, manual or automatic

1322 LBS Loading Capacity: Our 1322 lbs / 0.6 ton 2-stage hydraulic telescoping transmission jack helps you easily guide a transmission securely. Great for any automotive or light truck transmission installation or removal. See where the problem is and solve it with a quality transmission jack.

33-1/2" -67" Lifting Range: Enhanced hydraulic pressure for an extended lifting range, the pedestal transmission jack with a 33-1/2 inch to 67 inch lift range, our jack can lift your car to any suitable height. Comes with a foot-operated pedal, so it's easier to rise, and free up your hands.

Precise Positioning: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done.

1/2 ton capacity pedestal transmission jack with 49. 6 inches to 68. 7 inches high lift range

Following a thorough chemical cleaning, a lead-free paint is applied to ensure a durable finish and to help prevent rusting

Designed to use with in-ground and above-ground lifts and easy to remove or install any transmission from car or light truck, manual or automatic

Load capacity: 1100 lbs

The lifting height ranges: from 3.8" to 15", which is high to accommodate most types of motorcycles or ATVs on the market.

Large & Anti-slip Platform: Large Size: 14.6" X 9" & Rubber pad with stripe texture.

High-performing Hydraulic Lift: No more bending over to lift your bike! Just press the foot pedal for easy lifting. This hydraulic motorcycle jack securely holds up to 350 lbs/0.2 tons and is equipped with a high-strength worm gear transmission and heavy-duty solid steel scissor structure. Lift your off-road motorcycle quickly and with minimal resistance.

36-inch Max. Lifting Height: Need help selecting a suitable lift for your beloved off-road motorcycle with high ground clearance? Pay attention to the lifting range! Our motorcycle lift has a range of 13"-36"/340-905 mm, making it easy to lift any off-road motorcycle.

Slide and Lock in Any Position: With 2 pcs 360° swivel casters and 2 pcs lockable casters, our hydraulic motorcycle jack glides effortlessly beneath your bike for effortless mobility. Once it's in place, you can lock the casters in position with the brakes, providing extra stability for your maintenance needs.

1322lbs Super Bearing Capacity: The VEVOR Transmission Jack - your ultimate solution for installing or removing transmissions from most automobiles and light trucks. With an impressive super bearing capacity of 1322lbs, you can trust its solid stability to make maintenance work easier.

Hydraulic Lifting: Experience the ease of hydraulic lifting with our foot pedal. Simply use the foot pedal to lift it to your desired height, which can range from 32 in/820 mm to 67 in/1700 mm. This allows you to comfortably sit or stand while performing maintenance. To lower the jack, turn the handle to the right to release the pressure.

Reliable and Stable Saddle: Never worry about the saddle shaking when you install or remove your transmission. Our saddle is fixed with upgraded screws, and two bolts can adjust the saddle with an angle of up to 30° tilt to support different shapes of transmissions.

Large Weight-bearing Capacity: When you need to lift your motorcycle for maintenance and cleaning, you can partner with a VEVOR hydraulic motorcycle lift jack. Through the load-bearing tests, the motorcycle lift jack can securely hold up to 1500 lbs/0.7 tons. The motorcycle center jack is a great helper in your garage to lift almost any standard motorcycle, touring bike, cruiser, ATV, and other models.

Hydraulic Motorcycle Lift Jack: With a long handle and press pedal, this motorcycle lift jack allows easy operation and lifting with minimal effort. The high-quality hydraulic pump provides a lifting range of 4.7 to 15 inches, making motorcycle jack stand lift perfect for heavy motorcycles with less resistance.

Lift with Peace of Mind: Our hydraulic motorcycle jack has a 3-position safety pin that secures it at the desired height. The non-slip rubber stripe platform and two ratchet belts ensure the stability of heavy vehicles during maintenance, making the motorcycle lift safer for operation.

High Quality: The heavy-duty and solid steel structure of this motorcycle lift jack comes with a black powder-coated finish; The paint coating is oil, dirt, and rust-resistant, which is much easier to clean up after repairs and extends its service life.

Large Platform:The top surface measures 14.6"×9", it is large enough to raise and lower a transmission or a motorcycle; It is designed with a durable rubber pad with striped veins, which has a large contact area with your motorcycle and help to avoid slippage and scratching.

Easy to operate: It is attached with a crank handle for easy operation; By rotating the metal sleeve, you can lift a motorcycle easily, saving much labor and working more efficiently; It is recommended for tire, oil, filter changes, a really excellent helper for motorcycle repair and maintenance.

ASSEMBLY FREE: Easily lift and support motorcycles weighing up to 1100 pounds with this assembly-free motorcycle lift stand from Orion Motor Tech, featuring a handy T handle and a 3/8" socket for effortless operation

SAFE OPERATION: This motorcycle scissor lift is equipped with an ultra-long safety bar and duplex bearings, adding an extra level of security and safety when you work on your cruisers, touring bikes, and dirt bikes

WIDE PLATFORM: The wide deck on our motorcycle stand lift offers a stable and spacious platform for your motorcycle, preventing it from tipping or shifting while it is lifted or lowered

Adjustable tilt saddle

Heavy duty welded I-beam frame / Wishbone design for extra-low profile

Saddle tilt forward (deg): 55° forward, 10° back, 12° side

1/2 ton capacity pedestal transmission jack with 48.4 inches to 78.7 inches high lift range

4-leg base with 3 inches steel wheels that swivel full 360 degrees on ball bearing caster

wide base for stability and balance, includes 31" long safety chain to secure transmission on saddle. Release valve is spring loaded to automatically halt lowering action when let go

[PAIRS W/TRANSMISSION JACKS]- Quick and easy installation to all under hoist transmission jack saddles

[UNIVERSAL PLATES]- Universal adapter plate included for mounting to all other under hoist jack saddles

[40 GALLON CAPACITY]- Length, width, and height adjustments to handle any fuel tank configuration up to 40 gallon capacity

PREMIUM PERFORMANCE - This underhoist stand is made of the highest-quality steel materials that are durable and powerful and perfect for taking on tough jobs; Max load capacity: up to 3/4 a ton

SLEEK DESIGN - Designed with a slender body, this underhoist stand will help you work in tight spaces and is convenient to pack away in your car or other compact spaces

SOLID BASE - Equipped with a stable 12-inch diameter base of this underhoist stand that helps prevent slippage and makes the work area safer

[IDEAL FOR LOW GROUND CLEARANCE] - The 4-7/8" starting height allows shorty bottle jack to fit most low ground car clearance, and it has a double ram design. The car jacks fully extend up to 8-7/8" on the basis of constant capacity.

[STURDY STRUCTURE] - The compact bottle jack is designed with high-quality heavy duty alloy steel structure to ensure quality and durability. The pressure pump is designed to lift with minimal effort.

[APPLICATION] - Ideal for automotive and agriculture repair shops, loading docks, garages, warehouses, and factory floors. Also this is a heavy duty jack to help level heavy equipment.

[HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars.

[DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift).

[WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY.

The updated welded 1/2 ton capacity pedestal transmission jack has high lift range from 48.4 inches to 65.75 inches,constructed with high-quality and durable steel,

Equipped with 4-foot welded base with 3-inch steel wheels, which can rotate 360 degrees on the ball bearing casters, making it easy to move anywhere and making your base stronger

The saddle can be adjusted to fit most transmissions, and the safety chain can be tilted forward, backward, left and right