Best Torin Pump Jacks in 2026

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Lightweight aluminum body nearly half the weight of steel jacks

Rapid-Rise Technology with dual pump pistons for fast saddle rise to load

Includes pair of 3 ton aluminum jack stands

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Quick lift design

Removable saddle

Minimum Lift Height: 3-15/16" inches

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's 3 ton floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3-6/11"/90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process.

Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

LIFTING CAPACITY: 4,000 lbs.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

[100% LIGHTWEIGHT ALUMINUM] - Weighs only 58 pounds which is lightweight for easy portability.

[DUAL PUMP PISTONS] - Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 3/4" - 19 1/4"

[VEHICLE PROTECTION] - Designed with a foam handle bumper to protect vehicle from damage

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

LOAD CAPACITY : BEETRO electric hydraulic jack has a maximum lifting weight of 5 tons (11000 lbs) and a lifting height range of 6 to 17.7 inches. 4 in 1 Design: It can be used as hydraulic jack, tire inflator pump or LED working light. Moreover, equipped with a electric wrench. Meet your different needs.

UNIVERSAL POWER SUPPLY : This car electric jack is powered cigarette lighter power outlet or car battery, and comes with a 11.5 feet power cord, long enough to go through the 4 tires without changing the power source. ATTENTION : Start car engine before operation. Never use this jack on slop ground or over 5 ton vehicles.

EASY AND FAST LIFTING: Just press the button of the jack will raise or lower automatically, and it takes about 2 minutes to reach maximum height. Save your efforts and time. Perfect for car’s owner, especially best choice for women.

Capacity - 3 Ton (6000lbs), and Lift Range - 6 in. - 21.5 in.

Adapter included increases the overall max lift height by 7.75 in.

Bottom skid plate to keep the jack stable

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

1 YEAR WITH SUNEXPRESS: Get in the express lane with the industry’s leading program and exchange warranted products directly with Sunex.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

RAPID RISE TECHNOLOGY: Dual pump pistons quickly raise the floor jack saddle to load.

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle

[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle

[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Aluminum Pump Jacks work with the Aluminum Poles

Telescopes to 27 inches

3 separate back-up safety systmes

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

EASY TO USE: Aluminum and steel hybrid construction makes the jack lightweight and easily portable at 64 Lbs. Side rail handles makes the jack simple and easy to position. Rear swivel casters for quick maneuvering.

SAFETY: Integrated overload and by-pass safety valve prevent use beyond rated capacity and over-extension. EVA padded handle provides vehicle protection when jack is lifting.

ADVANCED ENGINEERING: Fully robotic welded oil pump and forged base eliminate oil leakage. Dual pump for quick and efficient lifting speed.

Rated capacity: 3 Ton 6000LB. Lift range: 3-3/4” to 19-5/16”. Jack handle with protective foam bumper sleeve is included

High performance racing jack is made of high strength aluminum frame to reduce product weight and increase portability

Professional dual pump quick lifting hydraulic system saves time and is equipped with safety valve to prevent overloading beyond rated capacity

Country of origin : China

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

3-1/2 Pumps Lifts Most Work Loads

Lightweight, compact design takes up less space on your shop floor, easier to transport

Constructed for professional race teams out of precision-machined, high strength, aircraft aluminum billet

This compact racing jack is constructed with durable, aircraft aluminum billet./ Industrial quality for professional mechanics and hardcore automotive enthusiasts

A knurled steel handle ensures a steady grip while you quickly lift your load in just 3-1/2 pumps!

The racing jack also features a universal joint release mechanism for smooth, precision lowering and a compact design for easy storage and transport.

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift system allows you to raise the jack to the desired height with ease

Lift range from 3-15/16" to 18-5/16" allows the jack can be used both under high-profile and low-profile vehicles

Aluminum floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect vehicles from damage

3 pump model

Red finish

Lightweight with a 3,000 pound capacity and a low profile

4 inches of setback

7.5 inches total lift above stock location

Limited lifetime warranty on structure of jack plate

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

75 Ton Capacity Aluminum Hydraulic Cylinder

Includes “Shut-Off Valve” to allow the pump to be removed while ram is extended

Minimum Height: 12 Inches

EFFORTLESS LIFT: With a lifting range of 3.35"-13.98", our 2-ton floor jack makes it easy to get under even low-profile vehicles. It's ideal for cars, trucks, SUVs and a variety of other lifting support needs

LIGHTNING-FAST LIFT: The dual pump pistons of our floor jack provide rapid raising so you can quickly and easily achieve the desired height for your vehicle

HASSLE-FREE MANEUVERING: This floor jack includes 2 360-degree swivel casters, making it effortless to maneuver and transport

Durable and sturdy aluminum lifting unit and frame for a high-quality appearance and lighter than general steel trolley jack

Side-mount handles allow for extra portability; Two-piece handle with foam bumper provides additional ease for placing and rising

Capacity: 3 ton (6000 lbs), low profile chassis with min lifting height of 3.74", max height can reach to 18.9"