Best Trendnet Flow Switches in 2026

【Compatible】 This GLX-FLO-RP flow switch can compatible with all the salt chlorine generator systems of Hayward and Goldline. GLX-FLO-RP flow switch replacement can be used with Hayward Goldline Salt Chlorination Turbo Cell.

【Suitable Models】The swimming pool flow switch suitable for almost all Hayward Goldline salty system,Hayward part GLX-FLO-RP can replace GLXFLORP, GLX-FLO-HP, Q-12DS-C2, OPT-F/S. Suitable for : Pro Logic, Mineral Springs, Mineral Springs MS10/MS11, Aqua Plus, Aqua Rite XL, Aqua Logic, Aqua Rite Pro, Aqua Rite compatible, Aqua Plus, H40, SwimPurePlus, SplashCLEAR, SmartPure, Splash SP-40...

【Accessories】 The water flow sensor hayward GLX-FLO-RP has a 15-Foot Cable. One end is a standard Phone Jack connection and it has a circle gasket and a round of tape.

🌟🌊【Safe and Reliable】This flow sensor switch is made of brass, all materials are in line with ROHS testing standards. It's a safety device that shuts off the current to the device (heaters, pumps, etc.) when it senses no water flow.When connecting the load, please add a relay.

🌟💧【Thread type: 3/4" BSP Male Thread】 The flow sensor `s male thread external diameter: 25.85mm.It is fit in NPT Thread if you connect them with teflon

🌟🌊 【Easy to install 】Our flow sensor is waterproof, heat resistance, pressurresistance, cold resistance, small size, stable and reliable.

Max Switch Voltage: 250 VAC

Max Switching Current: 5 AMPS

Resistance with Leads: 30 OHM

For starting or stopping electrically operated equipment such as signal lights, alarms, motors, automatic burners, metering devices and others

1" NPT

Minimum/maximum temperature: 32 degrees F/300 degrees F

Type 3R (NEMA) or Type 4 (NEMA) enclosure allows use in indoor or outdoor applications

Viton diaphragms allow use in fluid lines carrying chlorinated water, treated water, or other nonhazardous fluids

low-flow operation on low-flow models actuates switch with less than 1.0 GPM (3.8 L/min) flow for water applications or 9.0 GPM (34.1 L/min) flow for steam applications

This is a genuine OEM (Original Equipment Manufacturer) part.

Use genuine OEM parts for safety reliability and performance

Used in water treatment systems, central air conditioning, water‑cooled units and other fields.

Suitable for water, ethylene glycol and any other liquid that has no corrosive effect on brass and phosphor bronze and has no effect on sealing performance.

The flow switch has the characteristics of high sensitivity and strong durability, practical for use.

Wetted Materials: Bellow: Tin-bronze; Vane: Stainless steel; Body: Forged brass

Temperature Limits: 230°F (110°C)

Pressure Limits: 145 psig (10 bar)

This flow switch is made of high quality stainless steel, corrosion resistant and long service life.

This product is used to measure the fluid dynamics of fluids passing through pipes, such as water, ethylene diluents, glycols and other liquids that do not corrode copper.

This water flow switch is suitable for water treatment systems, central air conditioning, water cooling units, fire protection systems and other fields.

HIGH QUALITY: It adopts premium material, with strong temperature adaptability of 0~ 120, and can withstand high pressure of 1.0Mpa.

ADJUSTABLE: The flow control value is adjustable and the action repetition point is stable.

MEASURE LIQUID: The product is used to measure the dynamic state of the liquid flowing through the pipeline, such as: water, ethylene, ethylene glycol and other liquids that have no corrosive effect on copper

package height :26.67 cm

package length :10.795 cm

package width :10.795 cm

Product Type :Electronic Component

Package Dimensions :9.1 Cm L X10.4 Cm W X21.3 Cm H

Country Of Origin :United States

Monitor flow in 1/2" to 2" pipe

Explosion-proof

Leak proof lower body machined from bar stock

It is used to measure the dynamic state of the liquid flowing through the pipeline, such as: water, ethylene, ethylene glycol and other liquids that have no corrosive effect on copper.

When the flow rate of liquid exceeds or falls below the set flow rate, the SPDT contacts can turn on one circuit and cut off the other at the same time. The flow switch is usually used in places requiring interlocking or

Repeatability error is about 2.5%, ensure high stability of products.