Best Andeli Gas Welding Equipment in 2026

Multi-functions -MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch and SPOOL GUN need purchasing separately, WP-17V-35,LBT150)

Synergic MIG -provides communication between the power source, feeder, and gun. Easy work with new welders or users.

Gasless Flux MIG welds -release hard moving of gas cylinder, release the low efficiency of stick welds, and work with gasless flux wire perfectly

IGBT inverter technology, Full 30-205Amp(max) with digital display, reliable quality and stable performance.

Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses

The MIG-205DS is capable of true lift TIG(need buy extra tig lift torch,not included inside product) welding as well as stick welding ,4 Functions in 1 of Gas MIG /Gasless MIG / Lift TIG / Stick

[SPECIFICATION] 49pieces TIG Torch Accessories (consumables).

[APPLICATION] Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch.

[EXCELLENCE] With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel.

71pieces TIG Torch Accessories (consumables)

Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch

With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel.

Premium quality replacement MIG gun stinger torch, 100Amp, 8-foot (2.5m) cable, This is for 1 Complete Replacement Mig welding gun for Clarke 180EN and 130EN Mig Welders, Clarke P/N WE23000054.

The gun is 8 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires. There is a gas valve in the handle, so this gun can be used with or without gas

This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers

【ER4043】Commonly referred to as “AlSi5", has a 5% silicon and is the oldest and one of the most widely used aluminum welding wires for general purpose applications.

【Shielding Gas Required】Usually 100% Argon, Helium or mix.

【Excellent Welding Performance】The silicon additions result in improved fluidity to make the alloy a preferred choice by welders. Less sensitive to weld cracking and produces brighter.

MIG welding gun accessory kit tip-nozzle-diffuser for Lincoln Magnum 100L & Tweco Mini/#1

Fits Lincoln Magnum 100L (K530 series) & Tweco Mini/#1 MIG welding gun or equivalents

2-pcs gas nozzles 21-50 (1/2"), 20-pcs contact tips 11-35 (0.035") and 2-pcs gas diffusers 35-50.

[ER70S-6] ER70S-6 is a gas shield copper coated carbon steel welding rod for fabrication of mild steel.

[SHIELD GAS] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup. And the greater the argon content of the shielding gas the smoother the bead appearance with less spatter.

[APPLICATION] For a variety of mild and low alloy steel.

Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable

This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns.

Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire

MIG welding gun accessory kit tip-nozzle-diffuser for Lincoln Magnum 100L & Tweco Mini/#1

Fits Lincoln Magnum 100L (K530 series) & Tweco Mini/#1 MIG welding gun or equivalents

2-pcs gas nozzles 21-50 (1/2"), 20-pcs contact tips 11-30 (0.030") and 2-pcs gas diffusers 35-50.

MIG welding gun accessory kit (0.035") for Miller Millermatic M-25/M-40 and Hobart H MIG gun.

Fits Miller Millermatic M-25/M-40 and Hobart H MIG welding gun torch.

2 gas nozzles 169726 (5/8"), 20 contact tips 00-068 (0.035"), 2 tip adapters 169-728 and 2 nozzle adapters 169-729.

A brand new ReplacementTweco #2 Mig gun. The gun is rated for a maximum of 250 amps and has a 15 foot lead

The back end uses a euro quick connect fitting where no tools are needed to remove or install the mig gun.

This gun will fit a variety of machines

[WP-20F] Premium quality 250Amp water-cooled flexible head WP-20 complete TIG welding torch package with 25-foot power cable.

[CONNECTION] Gas Line (Red) Connection, 5/8"-18 RH; Water Supply Line (Blue) Connection, 5/8"-18 LH; Power/ Water Return Cable Connection, 7/8"-14 LH with 45V11 Adapter

[APPLICATION] Ideal replacement TIG welding torch for Miller Syncrowave 250, Syncrowave 250DX (S/N LE386757 and down), Miller 330A/BP and so on.

[TIG WELDER AC/DC] Software Controlled Square Wave AC/DC TIG inverter welder (Foot pedal is not included in the product).

[DIGITAL SET] Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas.

[2T/4T] Time with the choice of 2T or 4T trigger function allows control of the welding process at a professional level from start to finish.

Power/ GAS Cable Connection, 3/8"-24 RH with 105Z57 Adapter

Use standard TIG consumables and parts.

Air cooled design can make welding torch work for long term and extend its service life.

Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welder

Can take up to 0.9mm(.035") MIG solid wire(Gas MIG) and 0.9mm(.035") MIG FLux wire(Gasless MIG).

Apply to D100/D200 rolls (<10lbs) of MIG wire.

[TIG WELDER AC/DC] Software Controlled Square Wave AC/DC TIG inverter welder (Foot pedal is not included in the product).

[DIGITAL SET] Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas.

[2T/4T] Time with the choice of 2T or 4T trigger function allows control of the welding process at a professional level from start to finish.

[TIG WELDER AC/DC] Software Controlled Square Wave AC/DC TIG inverter welder (Foot pedal is not included in the product).

[DIGITAL SET] Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas.

[2T/4T] Time with the choice of 2T or 4T trigger function allows control of the welding process at a professional level from start to finish.

Multi-functions: MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch and SPOOL GUN need purchasing separately, WP-17V-35,LBT150)

Easy to use: Synergic MIG provides communication between the power source, feeder, and gun. Easy work with new welders or users.

Can take up to 0.9mm (.035") MIG solid wire (Gas MIG) and 0.9mm (.035") MIG Flux wire(Gasless MIG).

Applicable to various types of TIG Welding & Cutting Machine

5 pin plug and adjustable amperage from 0-250 amps

Step to activate gas contactor and increase amperage; release to turn off and decrease amperage

【More Compatibility】: Perfectly compatible with your Lincoln Magnum 100L welder & Weld-Pak 100HD 125HD 140HD 180HD, Yeswelder 205-DS, Magnum 100SG spool gun, Eastwood 135/175, Lincoln sp-175, Snap-on YA240 with Tweco gun. For more compatibility, please check the product description below.

【Good Heat Resistance】: This Gasless welding kit made by high-quality materials with Good Heat Resistance for a good service time.

【Light Weight and Super Durability 】: The gasless nozzle and Gas Diffusers are made of high-grade refractory materials and brass, light weight and efficient. Keep you a better performance in your welding project.

IGBT inverter technology, Full 30-205Amp(max) with digital display, reliable quality and stable performance.

Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses

The MIG-205DS is capable of true lift TIG(need buy extra tig lift torch,not included inside product) welding as well as stick welding ,4 Functions in 1 of Gas MIG /Gasless MIG / Lift TIG / Stick

【High Quality Materials】Our flux core nozzle tips kit made of high-quality brass materials, our gasless welding kit offers excellent heat resistance for extended service life, ensuring durability and reliability in your welding projects.

【Exceptional Heat Resistance】This Gasless welding kit made by high-quality materials with Good Heat Resistance for a good service time, providing a reliable and durable solution for gas shielding during welding, ensuring smooth and consistent welds.

【Lightweight and Durable】The gasless nozzle and gas diffusers are made from premium refractory materials and brass, making them lightweight and highly durable. This ensures optimal performance and efficiency during your welding tasks.