Best Gas Welding Kits in 2026

Tips feature quick disconnect couplings and color coded o-rings for gas identification.

Kit includes AR-B regulator, G-4 handle, AH-12 hose, A-3 tip, A-11 tip.

Solders up to 3-Inch

A MUST-HAVE BUTANE TORCH FOR YOUR MASTERPIECES: Use the LEXIVON 12-piece butane powered soldering set in a wide range of different applications, from wood burning to wire soldering.

TAKE CONTROL INTO YOUR OWN HANDS: Adjust flame from 1/2" to 2" with working temperature up to 2400° F, hands-free operation with the attachable base stand.

OUR BUTANE SOLDERING TORCH IS MADE TO LAST: 100% Metal refillable fuel tank will last longer than common plastic tubes. Pre-tested for leakage and ignition capability.

【Superior Ignition】Compared to most propane torches on the market, the RTTOOA propane torch has a superior ignition mechanism to ensure you have a successful ignition every time you press it. Of course, hundreds of thousands of tests have proved that it is very durable.

【Stable Performance】 ROTTOA propane torch has built-in patented design pressure regulator. This allows you to use it at a horizontal angle or even upside down, with normal ignition and sufficient injection pressure. (It is not recommended to use upside down for a long time)

【Premium Material】Flame control knob, adjust flame size. Flame lock, no need to press the trigger for long time. Cast aluminum body construction, solid brass valve and stainless steel burner tube, for withstand high temperature and long-term use. Safer and more durable.

WH270FC-V Torch Handle with Built-in Check Valves

CA270-V Cutting Attachment

1-3-101 Cutting Tip

CYLINDER NOT INCLUDED - MAPP gas cylinders shown in the pictures are only for illustration purpose, and not included in the sale of this listing. Check our store for BLUEFIRE gas cylinder and Ready-to-Go full kit. Free accessories include flint spark lighter and handy clip.

MOST POWERFUL - Patent Burner Head design applied the cutting edge Aerodynamic Jet Technology to turbo accelerate the mixed fuel gas flow, produce a much larger and hotter cyclone flame than most ordinary propane torches. A high output of 25,388 BTU/hr makes this little portable torch one of the most powerful gas torch available on market.

LARGE DIAMETER BRAZING - The jumbo size flame cone is capable to surround large diameter copper pipes up to 1.5 inch. When brazing, this feature will assure the whole welding joint to be evenly heated and easily turn into red within short time. The maximum temperature can reach up to 2527°F, meet your needs for almost all brazing job!

【Easy to use】A 3.6ft hose makes it easier to get the propane torch into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts.

【Multipurpose use】Flow control knob near propane torch for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc.

【Stable performance】 Auto trigger start igniter makes our hose propane torch super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface.

FULL METAL AND HEAVY DUTY - Solid and Ergonomic Metal Handle and Heavy Duty design for Professional Grade Applications, Manufactured with Premium material and under strictest quality controls.

INTERCHANGABLE TUBES DESIGN - Burner Tubes are interchangable, 3 Tubes are included in this kit (Swirl Flame, Shrink Heat Flame, Pencil Fine Flame), make this torch to be an All-Purpose torch to match All your needs from Welding, Brazing, Soldering to Grill, Barbecue and Charcoal Starter. One Torch For ALL!

FAST & EASY TRIGGER START - Auto Instant ON/OFF Trigger Start with Safety Lock make it super easy to ignite / extinguish flame with just 1-click, Integrated Adjustable Flame Control Valve allows you to freely adjust flame size to match any of your working needs;

OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation; Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency

EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions; Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly; Move the torch tip slowly along the line of your cut until the metal has fully parted

CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding; To create a neutral flame, you must find the correct relationship of oxygen to acetylene; After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch; Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch

Advanced gas control system on handle makes it easy to precision flame , dual flashback arrestors.

For soldering, brazing and jewellery work. Applicating in HVAC and plumbing.

360° rotation of torch tube is capable for various using environment. Temperature can reach 6432℉.

PRO KIT - Professional's Ready-To-Go Kit with the Hosed Pen Torch, 6 x Relaceable Heads, Piezo Lighter, and the Storage Box. Upgraded CSA certified hose for more safety and Piezo igniter for higher ignition rate!

ALL PURPOSE - BLUEFIRE HT-1933 is a powerful and portable soldering torch station that would meet all your needs! No matter you are professionals or DIYers, if you need to do some precision projects that requires higher temperature than those Butane soldering torches, this soldering station is perfect tool for you!

ACCESSORIES - HT-1933 is equipped with 3' long hose, allowing you enough space to move around during working. It is manually ignited, more traditional and reliable, a FREE flint spark lighter are included! You can also check our store for interchangeable Soldering Iron Heads Set that specially designed for this torch, make this an ALL PURPOSE tool for almost all working needs.

CREATE WITH FIRE: Precision torch equips you with the power of an adjustable flame and accommodates a higher heat intensity than most propane torch heads when used with Bernzomatic Map-Pro fuel. Precision flame and high heat temperature enable users with a versatile tool for creating truly unique projects.

UNIQUE SINGLE-HANDED USE: Offers optimal versatility and full control with both pistol and pencil grip options and auto on/off ignition. Push creative boundaries on a variety of mediums including wood, fine metals, plastics, leather, glass, resin and more.

TAKE CONTROL WITH PRECISION: This precision torch has been designed with makers in mind offering a 41" flexible fuel hose for extended reach and maneuverability allowing you to focus on the details while completing projects. The included light weight base can be fastened to a workspace and holds 14oz or 16oz fuel cylinders (sold separately).

Powerful Flame Temperature Heat up to 5252°F (2900°C)

Solid Brass Fittings, Heavy-Duty Design. Made in Taiwan.

Pin Point Burner Tip, Super Powerful Flame Temperature make it easy to Cutting, Welding, Brazing and Soldering

【High Performance】This mini torch can work with propane, acetylene, hydrogen, propylene, natural gas etc to finish jewelry repair work.Two connectors mix the oxygen and acetylene ( gas), to get high performance welding flame. The green one connect with oxygen and red connect gas (Acetylene/Butane/Propane)

【Multiple Tips】Equipped with 5pcs replacement tips to meet different application accordingly . The 5pcs tips are 1/8, 3/8, 5/8, 3/4, 7/8(mm).

【Micro Torch】Micro oxygen torch with 2M long trachea to realize various requirements of cutting ,welding/soldering work,easy to use. Dual connectors , mix oxygen with propane/ acetylene/ butane to get strong welding torch.

【Specifications】Up to 6000 Fahrenheit degrees；Including 5 interchangeable tips.Made of copper and aluminum, sturdy and durable.

【Application】Ideal for jewelry repair and construction, handicraft, metal sculpture, glass blowing, and electronics repair and manufacturing Etc.

【Package Includes】 1pc X Mini Gas Torch 5pcs X Interchangeable Torch Tip 1pc X User Manual

Victor G150 Series Portable Tote, Cuts up to 3, Welds up to 1¼ and Cuts up to 5, No tanks included

High Quality - This torch is easily maneuvered in areas impossible to reach with conventional torches. The head of torch is made of brass, which is durable, stable, rust resistant.

Easy to Use - To light with a spark lighter, open fuel valve slowly just before sparking. Hold spark lighter at a 45 degree angle to the tip of the torch. If ignition does not occur immediately upon opening the fuel valve, close the valve and wait 5 minutes before attempting to ignite again.

Different Strength - It can adjust the strength of flame from soldering/heat treating flame to cutting flame. And you can read our instruction to get more information.

Light/Medium Duty Tote A Torch Cutting and Welding Kit Outfit

Cuts up to 5mm (0.20") and welds 1.98mm (5/64") right out of the box

Ideal for general maintenance light duty fusion welding, braze welding, hand cutting applications and HVAC

【Mapp Gas Torch with 4.7Ft Hose is Easy to Use】The propane torch with 4.7Ft hose makes it easy to hold and move around. It's easier to squeeze in tighter places than a torch on top of a can. And the hose means you only hold the torch head not a heavy tank.

【Stronger Turbo Flame & Heat up Fast】The ultra swirl tip designed provides High intensity, more stable and more efficient swirl flame.The turbo torch kit heats up fast and high temperature makes working quick and easy.Ideal for Soldering/Brazing/Plumbing/Welding/Thawing frozen pipes or lines/Lighting woodstove/rust/paint removal/BBQ etc.

【Self-Ignition & Adjustable Flame】Built-in Self-igniter, instant on/off trigger ignition easily ignites & extinguishes flame with simple one-handed operation, more convenient and safe to use. The regulator can easily adjust the gas to control the flame to facilitate different detail work and avoid waste of gas.

Oxygen Regulator: 250-Series (87090)

Acetylene Regulator: 250-Series (87091)

Torch Handle: 100-Series (87093)

✅【Portable Operation】The Mapp gas Torch comes with included holster allowing it to be worn around the waist for upright tank positioning. A 4.9ft hose ensures safe working in narrow spaces.

✅【Flame Size Control】This Propane Torch features an additional sub-valve allowing for adjustable flame control. This Map gas torch kit can be operated easily with just one hand.

✅【Temperature Up to 3600℉】The propane torch nozzle boasts a unique steel pusher design with 6 blades to achieve high output heat, precise flame control, and faster welding speed.

General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc

Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming

Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene; Waterproof storage compartment

【Propane Torch with Flame Control & Quick Start】 The propane torch with igniter comes with a fuel control valve to adjust the flame size and temperature to your needs.The powerful propane burner torch heats up to 4352 °F,Propane gas heat output is 11000BTU,Mps heat output is 13000BTU.High intensity swirl flame puts out maximum focused heatand includes an instant on/off trigger ignition which provides easier lighting and increased fuel savings.

【Soldering Torch Safety Design(CSA Certified)】 Soldering torch head is designed for professional Multi-Purpose welding ,features a Safety Lock to prevent accidental ignition.Auto pressure regulated for consistent performance when tilted or momentarily inverted.Cast aluminum handle, comfortable grip, long use time, can prevent hands from being burned.And Certified to CSA,you can rest assured to use our propane blow torch.

【Map Gas Torch Durable Construction】 Brass burner tube,High temperature resistance,Stable performance,Safer and can be used for a long time.The propane torch weed burner is equipped with non-slip handle,ensure for comfortable use and maximum durability.The bottom is made of 100% brass for solid and tight connection to the propane gas cylinder.

1. Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.

2. This torch is easily maneuvered in areas impossible to reach with conventional torches. Used with acetylene, hydrogen, propane, propylene, map, and natural gas.

3. Flexible hoses connect to any standard pressure regulator. Includes five interchangeable torch tips.

🔥【OXY ACETYLENE TORCH KIT】New tote design features an ergonomic carrying handle, built-in storage case and a functional balanced design

🔥【Outstanding Performance】Outfit is designed for Medium Duty cutting, brazing and hvac jobs

🔥【EASY TO USE】 Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.

🔥【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation; Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency

🔥【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B;Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders.

🔥【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions; Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly; Move the torch tip slowly along the line of your cut until the metal has fully parted

Regulators: Flame Tech FTPTK-18 Portable Torch Kit includes light-duty acetylene and oxygen regulators with an outlet and inlet connection, displays for delivery pressure and cylinder pressure, and a pressure adjusting screw

Medium-Duty Torch Handle: The oxygen control valve, fuel control valve, and other crucial parts attached to the medium-duty torch handle enable smooth cutting and welding operations. The oxy-acetylene torch kit does not include cylinders

Cutting Attachment: The medium-duty cutting attachment with our welding kit has a high-pressure cutting oxygen lever. The cutting tip has the capability to cut up to ½” of any material

Victor style heavy-duty gas welding, cutting and heating outfit with 450 style regulators

Deluxe accessories, weld up to-1/2-Inch (127 mm), cut up to 8-Inch (203 cm) and heat with the proper tip

Check valves provided for added operator safety from reverse gas flow conditions

This listing is for Torch Head Only. Reday-to-Go full kits with Bluefire MAPP or Standard Propane gas cylinders are also available in our store.

Max Temperature heat up to 2642°F (1450°C), Powerful Super Swirl Cyclone Flame;

Trigger Start Piezo Ignition, Anti-Flaring. Use standard propane or MAPP or MAP/Pro gas cartridge, US Standard CGA 600 cylinder fittings;

💖Premium Torch Kit：Constructed of high-quality alloy, stainless steel and durable brass for extended life, ergonomically designed for ease of use and easy handling.

💖Powerful Performance：The oxy-acetylene regulator in the oxy acetylene torch kit can help you adjust the PSI to the correct position, easily adjust the gas flow rate, change the flame length according to your needs, and help you work easily and efficiently.

💖Easy To Operate & Carry：The cutting torch kit includes an instruction booklet, which should be read before use, to quickly get you up to speed with this new device; the kit includes a blue heavy-duty plastic blow-molded carrying case for easy transport and storage.

🔥[Brass Material] The whole kit is made of brass and stainless steel, durable materials that are resistant to wear and tear and will stand the test of time. 1/2 the welding capacity can speed up your work process and work easily.

🔥[Gas Welding & Cutting Kit] Gas welding cutting kit includes torch handle and nozzle. You choose the right nozzle to optimize your equipment, and the universal torch handle fits perfectly with the 0 welding nozzle; the kit comes in a blue heavy-duty plastic case for easy travel and use.

🔥[Application Scenario] This set is ideal for the amateur metal worker or seasoned professional such as general maintenance work, auto repair, metal sculpting, metal heating, metal cutting, and more.