Best 2 Gate Hinges in 2026

Premium Quality: Insage Screw Hook & Eye Hinges made of Anti-rust 304 stainless steel with non-welded one- piece products, with high load-bearing capacity and long lasting features, which is a good choice to install or replace gate post hinges on wooden fence, farm gate, garden gate and the like, adjust to correct the gate sag, sturdy and safety to mount wooden gates indoor & outdoor.

Specification: The total length of Screw Bolt Hook and Strap Hinge are 4-1/2'' with diameter 5/8'' pin hinge, both of the thread length reach to 3inches for easy to tightening.

Usage: Can be freely match with Wall Plate Hinges or Post Female Hinges ( Sold separately)

Premium Quality: Insage Wood Post Lag Screw Hinge made of Anti-rust 304 stainless steel with non-welded one- piece products, with high load-bearing capacity and long last features, which is a good choice to install or replace gate post hinges on wooden fence, farm gate, garden gate and the like, adjust to correct the gate sag.

Specification: The total length of Eye Hinges is 4-1/2'' with diameter 5/8'' pin hinge, and the thread length reach to 3'' for easy to tightening.

Usage: Can be freely match with diameter 5/8'' Screw Eye or Post Female Hinges ( Sold separately).

Premium Quality: Insaga Gate Hinges made of Anti-rust 304 stainless steel with non-welded one-piece products, with high load-bearing capacity and long lasting features, which is a is a good choice to install or replace gate post hinges on wooden fence or gate , adjust to correct gate sag.

Specification: The total length of Screw Eye is 4-1/2'' with diameter 5/8'' eye hole, and the thread length reach to 3'' for easy to tightening.

Usage: Can be freely matched with pintle 5/8'' Wood Post Lag Screw Hinge or Wall Plate Hinges ( Sold separately).

High-Quality Material: Insaga Gate hinges are made of 0.2'' Anti-rust 304 stainless steel with non-welded one-piece products, both ends with smooth finish oval design do not take up much space, with high load-bearing capacity to mount to wall or wooden post.

Specification: The size of fence gate hinges is 4.6''(L)x 1''(W)x 1.8''(H) with 5/8'' hinge pin, can match 5/8'' female frame hinge (Sold separately), Mounting holes are 1/2''.

Widely Used: This Gate hardware are widely used on most common gates, such as fence gate, farm gate,barn gate, or other flat surfaces, square wooden post.

High Quality Material: Insaga Wall Mount Gate Hinge made of thickness 0.2''/5mm Anti-rust 304 stainless steel with non-welded, 3 holes with high load-bearing capacity to mount to wall or wooden post,Sturdy and stable.

Specification: The size of Chain Link Fence Gate Post Hinges is 2.9''Lx2.2''W with 5/8'' hinge pin,mounting holes are 1/2'', can match 5/8'' female frame hinge (Sold separately).

Widely Application: This wood gate hinges are applied for a square wooden post or concrete and cement walls, widely used for most common gates, such as fence gate, garden gate, farm gate, or other flat surfaces, ideal for indoor and outdoor.

High-Quality Material: Insaga Gate Hinges made of non-welding Anti-rust 304 stainless steel, with high load-bearing capacity and long lasting features, which is a good choice to install or replace gate post hinges on a fence or gate.

Specification: The overall length of Eye Hinges is 4-1/2'' with DIA 5/8'' eye hole, and the thread length reaches to 3'' for easy to tighten; the size of Wall Plate Hinge is 4.6''(L) x 1''(W)x 1.8''(H) with 5/8'' hinge pin, mounting holes are 1/2''.

Easy To Install: Pre-drilled 2 holes on a flat surface, select the screws or bolts (Not included) based on your installation needs to fix it, the Screw Eye Hook can attach the wooden application.

High-Quality Material: Insaga Gate Hinge made of Anti-rust 304 stainless steel, which is a good choice for anyone looking to build or repair a gate, ensuring your gate or fence will open and close smoothly.

Specification: The overall length of J-Bolt Hinge is 8'' with 5/8'' pin hinge, the threaded shaft length is 6.7", come with nuts and washers for installation; this pipe gate hinge ONLY fit 1-3/8'' outer diameter post or pipe, the DIA of Gate Frame Hinge hole is 5/8''.

Installation: Drill a 1/2'' hole on post or gate frame, pass the J-Bolt Post Hinge though and fix with nuts and washers each side, to install J Bolts facing down or up a base on your needs, then works with 5/8'' gate frame hinge.

Heavy Duty Chain Link Gate Hinge: Insaga gate frame hinge made of resistance rust and corrosion 304 stainless steel, smooth finish, sturdy and long-lasting, only used for 1-3/8'' outer diameter Post/Pipe and 5/8'' hinge pin.

Widely Use: Chain Link Fence Parts is good to attach the chain link fence to post hinge and operate the gate smoothly, also can be as new installation or replacement of old parts for tube gate hinge, widely use for fence gate hinges, cattle gate hinge, farm gate hinge, horse gate hinge and the like, available in 1-3/8'', 1-5/8''and 1-7/8'', suitable for most common gate.

Specifications: This gate clamps can hold 1-3/8'' outer diameter post or pipe, the diameter of Gate Frame Hinge hole is 5/8'', which only match with gate hinge male pin 5/8''.

High-Quality Material: Insaga J-Bolt Post Hinge made of Anti-rust 304 stainless steel with one-piece molding without welding, is a good choice for anyone looking to build or repair a gate, ensuring your gate or fence will open and close smoothly;

Specification: The overall length is 10'' with 5/8'' pin hinge, the threaded shaft length is 8.7", come with nuts and washers for installation, available in 6'', 8'' and 10'';

Wide Application: This 5/8" Male Pin J-Bolt Hinge is compatible with a wide range of gate sizes and materials, can be used with various types of posts, including wood, metal, and concrete, adjust the width between two gates;

High-Quality Material: Insaga J-Bolt Post Hinge made of Anti-rust 304 stainless steel with one-piece molding without welding, is a good choice for anyone looking to build or repair a gate, ensuring your gate or fence will open and close smoothly;

Specification: The overall length is 8'' with 5/8'' pin hinge, the threaded shaft length is 6.7", come with nuts and washers for installation, available in 6'', 8'' and 10'';

Wide Application: This 5/8" Male Pin J-Bolt Hinge is compatible with a wide range of gate sizes and materials, can be used with various types of posts, including wood, metal, and concrete, adjust the width between two gates;

Specification: The overall length of J bolt gate hinge is 6'', and the thread length is 4.7'' and diameter is 1/2''(M12), the useable length is less than 4.7'' due to the washers and nuts, available in 6'', 8'' and 10''.

High-Quality Material: Insaga J-Bolt Post Hinge made of rust-resistant 304 stainless steel with one-piece molding without welding, is a good choice for anyone looking to build or repair a gate, ensuring your gate or fence will open and close smoothly.

Wide Application: This 5/8" Male Pin J-Bolt Hinge is compatible with a wide range of gate sizes and materials, can be used with various types of posts, including wood, metal, and concrete, adjust the width between two gates.