Best Emoon Clock Hands in 2026

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).

Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.

Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).

Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm)

Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4-8 mm (4/ 25-3/ 10 inches) thickness clock panel

Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length

Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch)

Size: total shaft length: 15 mm (3/ 5 inch); Thread length: 6.7 mm (7/ 25 inch); Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel Note: Please check the size of the clock movement below prior to purchase to verify whether it can fit over your clock

Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.

Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.

Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Two Pack Clock Movements are included. Accurate, High Torque and Dependable when in motion, and the second hand spins without any ticking. No Noise, provide a comfortable environment to sleep, work or study.

Six different style & size Clock Hands are included. An appropriate style & size set can fit for many clocks. All sets are good for replacement, repair and making of clocks.

The total length of the shaft of this clock Movement is 7/10in (17.5mm), with a thread length of 2/5in (10.5mm) that allows a clock face up to 3/10in (7.5 mm) thick. It can be used in a clock dial diameter from 4-1/3in to 9-6/7in by different clock hands set.

Package contents: 1 movement, 4 pairs of hands with different shapes, 1 Metal hooks, and some accessories.come with the specially designed protect box and instructions.

Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Choose the right clock mechanism:total shaft length is 13.5mm (17/32 inch),thread length is 5.5mm (7/32 inch); suitable for 1- 3 mm ( 3/64 -7/64 inch ) thickness clock panel.

Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs

Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Center of hole hand size: hour hand is approx. 90 mm (3.5 inch); minute hand is approx. 120 mm (4.7 inch); Second caps is approx. 7 mm (0.28 inch)

Nice DIY clock repair set: you will get 6 pieces of high torque long shaft clock movements and 6 different pairs of hands, along with 6 pieces hooks and 6 pieces pasters, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself; There are more functions waiting you to find out

Size details: the total shaft length is approx. 28 mm/ 1.10 inches, and the thread length is approx. 22 mm/ 0.86 inches; Sweeping movement is suitable for 19 mm/ 0.74 inches thickness of clock panel; Suitable size is for your easy use and storage

Accurate time keeping and quiet motor: the long shaft clock mechanism will give you great accuracy and dependability, along with sweeping motion, without ticking nosie and will provide you with a quiet environment, you can use it with confidence and convenience

PACKAGED WITH CARE: Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping

CHOOSE THE SUITABLE MECHANISM: this kit fit clock dials from 1/8 in - 1/4 in thick and is perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you

DECORATIVE CLOCK HANDS: Ornate sets for different options, perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge

High torque movement: high torque clock with hook and long shaft drive long clock hands (10 mm to 450 mm)

Movement size: 31 mm (1-1/5 inch); Thread length: 24.6 mm (24/25 inch); Jump second movement is suitable for 16 - 21 mm (5/8 - 4/5 inch) thickness clock panel

Length (from the center of the hole to the tip): approx. 145.5 mm (5.7 inch); Minute hand is approx. 207 mm (8.1 inch); Second caps is approx. 7 mm (0.28 inch)

Package and install: come with especially designed with blister cardboard box and instructions, convenient to carry, when you install this clock movement kit, please keep the hour hand and minute hand parallel; Note: there are detailed installation instructions on the back of the product package; Please install carefully according to the installation steps

Size from the center of the hole to the tip: the hour hand is approx. 133 mm/ 5.2 inches and 116 mm/ 4.6 inches long, the minute hand is approx. 175 mm/ 6.9 inches and 160 mm/ 6.3 inches in length; 2 second caps: 7 mm/ 0.28 inches

Clock mechanism size: total shaft length is approx. 23 mm/ 0.91 inches, thread length is approx. 14.6 mm/ 0.57 inches; Jump second movement is suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel

High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter

Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch); Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel

Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long; The minute hand is about 230 mm/ 9.1 inches in length

DIY quartz wall clock replacement movement parts

Suitable for repairing, replacing or making a clock

Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.

Package and install: come with especially designed with blister cardboard box and instructions, convenient to carry; Kindly note: the hands back color are silver, front color as the picture show

Movement size: total shaft length is approx. 15 mm/ 3/ 5 inch, thread length is approx. 6.7 mm/ 7/ 25 inch, jump second movement is suitable for 1 - 4 mm/ 1/ 24 - 4/ 25 inch thickness clock panel

Hole center to the tip hand size: the hour hands are approx. 35 mm/ 1.4 inches and 53 mm/ 2.1 inches respectively, minute hands are approx. 51 mm/ 2.0 inches and 69 mm/ 2.7 inches, 1 second hand is approx. 49 mm/ 1.9 inches, 1 second cap is approx. 7 mm/ 0.28 inches

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself

Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches

Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment

Package includes: pendulum clock movement set comes with 2 pairs of hands, pendulum, and instructions, easy to install

Pendulum clock mechanism size: total shaft length is approx. 20 mm/ 4/ 5 inch, thread length is approx. 11.7 mm/ 9/ 20 inch, jump second movement is suitable for 4 - 8 mm/ 4/ 25 - 3/ 10 inch thickness clock panel

Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inches and 68 mm/ 2.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 98 mm/ 3.8 inches, 1 second hand is approx. 100 mm/ 3.9 inches, 1 second cap is approx. 7 mm/ 0.28 inches

5 Pack of movements and hands is great for clock makers. Hands are suitable for a 10 inch clock diameter, and possibly other sizes. Check hand measurements listed below and decide if it fits your clock design!

Hour Hand: Full length: 3-3/4" and from center to end 3", Minute Hand: Full length 4-7/8" and 4" from center to end

Second hand: Full length 6-1/2" and from center to end 4-1/4"

DIY Clock Kit: Ornate set with 2 pairs of different style clock hands for your options, create your own DIY craft clock, minimalist wall clock as a gift, frameless theme clock, and family photo wall clock

Fit Clock over 20 in Diameter: The hour hand of tyle1 is approx. 7.1 in; Minute hand is approx. 9.1 in; Gold second hand is approx:2.1 in; Style 2: the hour hand is approx. 6.5 in; Minute hand is approx. 9.6 in, creating your own clock

Time-keeping step movement: features High precision and high torque clock mechanism, which ensures watchmaker's accuracy and dependability; step motion with a little ticking sound, powered by a AA battery

Good for repairing, replacing or making a clock

Quartz clock movement mechanism repair tool

Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.

Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use

Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 19 mm/ 3/ 4 inches; Jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel

Center hole to the tip length: hour hand is approx. 85 mm/ 3.3 inch; Minute hand is approx. 120 mm/ 4.7 inch; Second hand is approx. 109 mm/ 4.3 inch

Unique Design - 3D clock hands is easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.No harm to the environment and health.

Enjoy the DIY - 3D clock hands has an open design with just minute and hour hands.You can design your clock and room according to your habits, or share your design process with friends and family.

Silence Movement - Silent sweeping, mute movement 3d clock hands will give you a quiet night.

Clock quartz movements: high torque jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel

Movement size: shaft length is 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches)

Center of hole hand size: hour hand is approx. 170 mm (6.7 inch); Minute hand is approx. 243 mm (9.6 inch); Second caps is approx. 7 mm (0.3 inch)

Abundant package: there are 4 clock movements mechanism, 4 sets of accessories, 6 sets of short clock hands with different styles and length in the package, you are able to choose various styles according to your needs, you can also change or make your own clocks with different styles of clock frame

Proper dimension: the total length of the shaft is approximately 13 mm/ 0.5 inch, and the thread length is approximately 6 mm/ 0.24 inch, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm/ 0.04 - 0.12 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit

Work well: powered by AA batteries, the quartz DIY wall clock mobile mechanism has nice precision and equipped with sweeping motion, which can provide the watchmaker with accuracy and reliability, will not produce annoying ticking sound, moreover, will provide you with a quiet environment

EMOON DIY Clock Repair Kit: Comes as 6 clock movements with 9 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping

Choose the Suitable Clock Mechanism: Total shaft length is 3/4 in, thread length is 1/2 in, this kit fit clock dials from 1/8 in - 3/8 in thick , making you smile of the memories your old clock gives you

9 PACK CLOCK HANDS: Including modern and retro classic clock hands, fit for clock face from 5~12 in diameter; you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge

🍓🍓Applicable Scope: It is very suitable for DIY quartz wall clock replacement movement, etc. It is also suitable for cross stitch, three-dimensional embroidery, craft clock, frameless clock.

🍓🍓Movement Size: Shaft length is 31 mm (1-1/ 5 inch); Thread length is 24 mm (24/ 25 inch); Jump second movement, suitable for about 20 mm (4/ 5 inch) thickness clock panel.

🍓🍓Material: The hour and minute hands are made of aluminum, which is wear-resistant, rust-proof, corrosion-resistant, durable and long-lasting.

Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation.

Clock Movement Measurements: Total hand shaft length is 15.9 mm (5/8 inch). Total shaft diameter is 7.9 mm (5/16 inch).

Maximum Clock Dial Thickness: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable.

PACKAGED WITH CARE: Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping

CHOOSE THE SUITABLE MECHANISM: this kit fit clock dials from 1/8 in - 1/4 in thick and is perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you

DECORATIVE CLOCK HANDS: Ornate sets for different options, perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge

Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.

Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches; Jump second movement is suitable for 5 - 9 mm/ 0.2 - 0.35 inches thickness of clock panel.

Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.