Best Qlouni in 2026

[High Performance Cutter] This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut

[Heat Treated Blades] Knife edge by a special heat treatment, cutting fast formation without fraying or smashing the ends.Bring the cutter to a hardened state, made the blade hard enough to hold an sharp edge, yet be flexible enough to stand up to forceful use without breaking.

[High Chrome-Vanadium Steel] Using Chrome-Vanadium Steel Seiko forging, durable,made every cut quick and neat without fraying or smashing the cable ends.

➤[15 Size] Brass thread inserts kit includes 15 assorted of size that contains M2x4x3.5mm, M2x6x3.5mm, M2x8x3.5mm, M2x10x3.5mm, M3x4x5mm, M3x6x5mm, M3x8x5 mm, M3x10x5mm, M4x4x6mm, M4x6x6mm, M4x8x6mm, M4x10x6mm, M5x6x7mm, M5x8x7mm, M5x10x7mm.

➤[High Quality Material] These female thread brass knurled threaded insert embedment nuts are made of durable brass with high hardness and wear resistance, oxidation resistance, strong corrosion resistance and long service life.

➤[Excellent Workmanship] The embedment nut has a high-precision thread that is compatible with the corresponding screw and the insert has a guide so there is no need for a counterbore or countersink. Smooth surface with no burr, standard circular, firm and uniform, easy to install.

►[Natural Genuine Chamois Leather] Made of superior sheepskin, this chamois is eco-friendly, about 40 x 60cm/15.75 x 23.62inch.Packing includes 2 pieces.

►[Strong Water Absorption&Anti-scratch] With Strong water absorption, this chamois leather is perfect for wiping your car or other surface without leaving water stain, and there'll be no scratch after cleaning the surface.

►[Ability to Absorb Dust&Soft Texture] When you use dry chammy to wipe precision instrument, it can clean the dust on the surface and corners. And owing to chamois soft texture, it can be folded, rolled, pressed to store.

【Multi-size】This embroidery hoops set has 5 sizes, 8.5 x 13 cm / 3.3 x 5.1 inch, 10.8 x 15.7 cm / 4.2 x 6.1 inch, 17.5 x 25.7 cm / 6.8 x 9.7 inch, 22.5 x 32.5cm / 8.8 x 12.7 inch, 26.5 x 39 cm / 10.4 x 15.3 inch, can meet your different needs.

【Premium Quality】These plastic cross stitch hoops are made of high quality plastic, which is non-toxic and safe material. It is non-slip, wear-resistant, smooth surface, strong and durable, and has a long service life. It is an ideal choice for embroidery craft lovers.

【Candy color】This rectangular embroidery hoop set is available in 5 different colors:blue, Light purple,green, Rose red, yellow,which are both cute and beautiful. You can choose the color according to your own preferences, it will give you a different feeling when you use it, and it can match your different styles of embroidery or decorations.

♛[5 Different Sizes] Including 3pcs round embroidery hoops (3.93 inch(S), 5.51inch(M), 6.69inch(L)), 2pcs oval embroidery hoops (4.7x5.9 inch and 7.48x5.9 inch), different shapes and sizes to meet your various needs.

♛[Material] The Embroidery Hoops are made of high quality, flexible and durable rubber which has good resistance to pressure.Anti-skid texture and heavy duty design, make your embroidery easier.

♛[Retro Style] Embroidery hoops kits with a non-adjustable antique hanging brass ring, ideal for hanging and displaying cross-stitch art or wall decorations.

【Clock Mechanism Replacement】Great for repair, replacement or make a clock, applicable to craft clock, frameless draw clock, 3D large wall clock.

【Long Hands Size】Hour hand length is about 115 mm/4.5 inch; Total minute hand length is about 145 mm/5.7 inch; Second caps is about 165 mm/6.5 inch.

【Total Shaft Length】20 mm/0.8 inch, Thread length: 14 mm/0.6 inch, for 10 mm/0.4 inch thickness clock panel.

Size of the Iron Part - 185 x 115 x 100 mm. Please confirm whether your car model is suitable before purchasing.

Size of the Plastic Frame - Outside 185 x 115 mm, inside 180 x 100 mm. Before purchasing, please compare the dimensions with your car stereo carefully. If you are not sure, please contact us directly for confirmation.

Features - Car Panel Frame Easy installation, This iron frame is suitable for standard double din head unit.

◆ Car radio antenna can help you improve the quality and enhance the stability of signal, and it can get 3 dBi Gain signal so that you can enjoy radio or music during travelling.

◆ The core made of bronze wire and the shell made of ABS, durable, with self-adhesive tape, SMA antenna can be sticked firmly, don’t worry whether it will fall off from the vehicle.

◆ Frequency Range: VHF 824~960 MHz, UHF 1710~1990 MHz; Bandwidth: V136/U290 MHz; Input Impendence: 50 Ω; Max Input Power: 50 W.

DIY Clock Repair Parts Replacement - Package includes 2 pieces quartz clock movement mechanisms, 2 pieces gold arabic and roman numerals and 3 sets of clock hands, enough quantity for daily use and replacement.

Dimension Details - Arabic numeral is 0.8 inch in height, roman numeral is 0.9 inch in height; Total shaft length is 20mm/0.8 inch and thread length is 14mm/0.6 inch, suitable for 0.3 - 0.44 inch thickness clock panel and the clock hands fit for 10-14 inch clock surface.

Easy to Use - Just need to use the glue than you can easily make the clock panel, the whole applying process is simple and fast; The installation of the hands is also very simple, and you just need to keep the hour hand and minute hand parallel, then place the hour and minute hands on the movement in turn.

Multi-purpose scraper/chopper tool for portioning bread and pastry dough, chopping and measuring

Broad, rectangular-shaped, stainless-steel blade with square edge

1-inch measurement marks along blade edge for creating perfectly even portions

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire

21-degree

2.5mm heat-treated carbon steel construction provides durability and long life

Lineman's Pliers cut ACSR, screws, nails and most hardened wire

High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs

Induction hardened cutting knives for long life

Wire cutter with induction hardened cutting edge stays sharp longer

Strips and cuts 10-22 AWG

Pliers style nose allows wire stripper to pull and loop in wire

Durable nickel chromium steel construction

ProTouch grips provide extra comfort and reduces hand fatigue

Induction hardened cutting edge stays sharper, longer

Cold forged, heat treated steel handles for strength

Precision ground cutting jaws for a clean cut on every cable

Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules

IRWIN 2078300 8-inch wire stripper features 2-inch jaw width with capacity for 10 to 24 AWG with self-adjusting mechanism

Crimp 10-22 AWG insulated, 10-22 AWG non-insulated, and 7-9mm ignition terminals

Strip wire from 10-24 AWG while swivel knob micro-adjusts to strip gauges smaller than 20 AWG

SELF-ADJUSTING: Strip wire from 10 to 24 AWG with our self-adjusting mechanism. Jaw Width: 2 inches

ADJUSTABLE STOPPER: Control the length of the core strip with the built-in adjustable stopper

CRIMPING: Crimp 10-22 AWG insulated, 10-22 AWG non-insulated, and 7-9mm ignition terminals

Note: Cutting Locks Is Not Recommended

Drop Forged Chrome Molybdenum Steel And Powder Coated Jaws For Sure, Efficient Cutting And Long Life. Ergonomic Bi-Material Anti-Slip Grips Provide Greater Control And Comfort In Cutting

Classic Lever-Fulcrum Design And Precisely Aligned Blades Deliver Added Leverage With Less Effort

【High Quality Material】 Upgrade Grip vs. old version. Durable steel with drop forged construction and heat treated for strength and durability. Up to 65 HRC. Max cutting capacity: 2.3mm (3/23in.) 【Note】Cutting Locks Is Not Recommended

【More Power & Less Effort】 Classic leverage design and precisely aligned blades deliver added strength. Less effort is required during cutting.

【Patented Ergonomic Handles】 3rd generation grip makes it anti-slip and more comfortable, ensuring your safety. Built-in handle lock is easy for storage

【High Hardness Material】 Durable steel with drop forged construction and heat treated for strength and durability. Up to 65 HRC. Max cutting capacity: 2.3mm (3/23in.) 【Note】Cutting Locks Is Not Recommended

【More Power & Less Effort】 Classic leverage design and precisely aligned blades deliver added strength. Less effort is required during cutting.

【Ergonomical Handles】 PP+TPR rubber handles make it anti-slip and more comfortable, ensuring your safety. Built-in handle lock is easy for storage.

Diagonal Pliers for Flush Cut Plastics 45 Angled

Diagonal Pliers for Flush Cut Plastics 45 Angled

Diagonal Pliers for Flush Cut Plastics 45 Angled

Product 1: Able to cut up to 18GA material

Product 1: 360 degree swivel head for maneuverability

Product 1: Connects via standard 1/4-inch hex shank

Cutting wire temperature 360° Fahrenheit for clean cuts

Double function fence with lockable feed bar

Working surface of Alu Cobond compound for ease of pushing work pieces

Durable nickel chromium steel construction

ProTouch grips provide extra comfort and reduces hand fatigue

Induction hardened cutting edge stays sharper, longer

Leading Manufacturer Of High-Quality Products

International Renown For Our Diverse Range Of Award-Winning Products

Fully Equipped With State-Of-The-Art Technology

High leverage Diagonal Cutters for very tough, continuous use

20% reduction in required force compared to conventional diagonal cutters of the same length

Precision cutting edges

VDE-tested precision pliers for fine cutting work, e.g. e.g. in electronics and precision mechanics.

Complete your VDE tool stock. Sharpened, very sharp cutting edges, without bevels.

Cutting cut with controlled micro cutting edge offset for ultra-precise cutting even the thinnest wires and long service life.

Set Includes: 6.5", 9.5" & 12" Tongue & Groove

Right angle, laser heat-treated teeth grip better and last longer

Undercut tongue & groove design won't slip

Pliers with high-leverage design, with rivet closer to the cutting edge for 36-Percent greater cutting power than other plier designs

Short jaws and beveled cutting edges permit close cutting of wire

Induction-hardened cutting knives for long life

Diagonal Cutters with angled head design for easy work in confined spaces

High-leverage pliers with rivet closer to the cutting edge for 36-percent greater cutting power than other plier designs

Short jaws and beveled cutting edges permit close cutting of wire