Best Hicarer Clock Kits in 2025

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs

Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Center of hole hand size: hour hand is approx. 90 mm (3.5 inch); minute hand is approx. 120 mm (4.7 inch); Second caps is approx. 7 mm (0.28 inch); Please check the size before buying

Package and install: come with especially designed with blister cardboard box and instructions, convenient to carry, when you install this clock movement kit, please keep the hour hand and minute hand parallel; Note: there are detailed installation instructions on the back of the product package; Please install carefully according to the installation steps

Size from the center of the hole to the tip: the hour hand is approx. 133 mm/ 5.2 inches and 116 mm/ 4.6 inches long, the minute hand is approx. 175 mm/ 6.9 inches and 160 mm/ 6.3 inches in length; 2 second caps: 7 mm/ 0.28 inches

Clock mechanism size: total shaft length is approx. 23 mm/ 0.91 inches, thread length is approx. 14.6 mm/ 0.57 inches; Jump second movement is suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel

High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter

Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch); Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel

Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long; The minute hand is about 230 mm/ 9.1 inches in length

Long spindle quartz clock: good handwork DIY clock replacement movement parts with hook, which meet your installation needs

Movement size: total shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Hand length: total hour hand length is about 86 mm (3.4 inches); Total minute hand length is about 116 mm (4.6 inches); Second caps is about 7 mm (0.3 inches)

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself

Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches

Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment

Good package: come with specially designed blister cardboard box and instructions, convenient to carry

Pendulum clock mechanism size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches); Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel

Size from the center of the hole to the tip: the hour hand approx. 68 mm/ 2.7 inches; The minute hand is approx. 98 mm/ 3.9 inches in length; The second hand approx. 100 mm/ 3.94 inches

Package includes: pendulum clock movement set comes with 2 pairs of hands, pendulum, and instructions, easy to install

Pendulum clock mechanism size: total shaft length is approx. 20 mm/ 4/ 5 inch, thread length is approx. 11.7 mm/ 9/ 20 inch, jump second movement is suitable for 4 - 8 mm/ 4/ 25 - 3/ 10 inch thickness clock panel

Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inches and 68 mm/ 2.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 98 mm/ 3.8 inches, 1 second hand is approx. 100 mm/ 3.9 inches, 1 second cap is approx. 7 mm/ 0.28 inches

5 Pack of movements and hands is great for clock makers. Hands are suitable for a 10 inch clock diameter, and possibly other sizes. Check hand measurements listed below and decide if it fits your clock design!

Hour Hand: Full length: 3-3/4" and from center to end 3", Minute Hand: Full length 4-7/8" and 4" from center to end

Second hand: Full length 6-1/2" and from center to end 4-1/4"

DIY Clock Kit: Ornate set with 2 pairs of different style clock hands for your options, create your own DIY craft clock, minimalist wall clock as a gift, frameless theme clock, and family photo wall clock

Fit Clock over 20 in Diameter: The hour hand of tyle1 is approx. 7.1 in; Minute hand is approx. 9.1 in; Gold second hand is approx:2.1 in; Style 2: the hour hand is approx. 6.5 in; Minute hand is approx. 9.6 in, creating your own clock

Time-keeping step movement: features High precision and high torque clock mechanism, which ensures watchmaker's accuracy and dependability; step motion with a little ticking sound, powered by a AA battery

Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use

Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 19 mm/ 3/ 4 inches; Jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel

Center hole to the tip length: hour hand is approx. 85 mm/ 3.3 inch; Minute hand is approx. 120 mm/ 4.7 inch; Second hand is approx. 109 mm/ 4.3 inch

EMOON DIY Clock Repair Kit: Comes as 6 clock movements with 9 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping

Choose the Suitable Clock Mechanism: Total shaft length is 3/4 in, thread length is 1/2 in, this kit fit clock dials from 1/8 in - 3/8 in thick , making you smile of the memories your old clock gives you

9 PACK CLOCK HANDS: Including modern and retro classic clock hands, fit for clock face from 5~12 in diameter; you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge

🍓🍓Applicable Scope: It is very suitable for DIY quartz wall clock replacement movement, etc. It is also suitable for cross stitch, three-dimensional embroidery, craft clock, frameless clock.

🍓🍓Movement Size: Shaft length is 31 mm (1-1/ 5 inch); Thread length is 24 mm (24/ 25 inch); Jump second movement, suitable for about 20 mm (4/ 5 inch) thickness clock panel.

🍓🍓Material: The hour and minute hands are made of aluminum, which is wear-resistant, rust-proof, corrosion-resistant, durable and long-lasting.

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.

Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches; Jump second movement is suitable for 5 - 9 mm/ 0.2 - 0.35 inches thickness of clock panel.

Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.

✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 5 different pairs of hands(4 black and 1 gold), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.

✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches); Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.

✔️ Five of most popular miniature clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel should be longer than 2.36in/6cm. The clock hands should be less than 3.74in/9.5cm.

Good package: come with specially designed blister cardboard box and instructions, convenient to carry

Pendulum clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch); Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel. Please check the size of the clock movement prior to purchase to verify whether it can fit over your clock

Size from the center of the hole to the tip: the hour hand approx. 90 mm/ 3.5 inches; The minute hand is approx. 120 mm/ 4.7 inches in length; The second caps are approx. 7 mm/ 0.28 inches

Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment.

Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel.

DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set.

Size: total shaft length is 17 mm (17/ 25 inches), thread shaft length is 8.7 mm (7/ 20 inches); Jump second movement, suitable for 2 - 5 mm (1/ 12 - 1/ 5 inches) thickness clock panel

DIY clock movement mechanism: DIY quartz wall clock replacement movement parts is good for repair and replacement project; Turn your clock into an accurate time keeping machine

Useful and good quality replacement: the clock repair tool part kit includes component for repairing, replacing, or making your own DIY clock project

Package : come with specially designed box convenient to carry and protect all from scratching, bending, and other damage while shipping.

Clock mechanism size: total shaft length is 13.5 mm (37/64 inch), thread length is 5.5 mm (9/32 inch); Sweep silent movement, suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.

Clock hands kit: package includes 1 Metal hook,2 pieces of minute hands,2 pieces of hour hands, 2 second hand ,1 second cap and mounting hardware kits, easy for installation; Simple and elegant design, these replacement parts suit well to different styles of clock frame. clock,etc.INSTRUCTIONS - Included along with the movements.

Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames

Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch; The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes

Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect

Package includes: you will get 4 pieces quartz clock movement mechanisms with 4 sets of accessories, and 6 sets of different pointer kits; There are various styles to choose, which is very suitable for different styles of clock frames

Size: the total shaft length is approx. 22 mm/ 0.87 inch, and the thread length is approx. 15 mm/ 0.59 inch; The clock movement mechanism are suitable for 10 - 12 mm/ 0.39 - 0.47 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter; Please keep the hour hand and minute hand parallel when you install this clock movement kit

Quality material: the movement is made of ABS material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect

Size: The total shaft length is about 20mm/0.79" and the thread length is about 13mm/0.51". Clock movement repair kit is suitable for clock dials with a thickness of 9 - 13mm / 0.35 - 0.5".

Accurate Time and Quiet Motor: Clock parts kit provides extreme accuracy and reliability. It is equipped with 6168s silent sweep second movement, no ticks, which will provide you with a quiet environment.

7 Different Styles of Hands: This clock replacement mechanism comes with 7 pairs of different pointer and length. It's perfect for repairing clocks, clock replacement or making your own customized clock project.

Quantity package: this battery clock replacement mechanism set comes with 5 quartz clock movements, 7 pairs of clock hands, 5 gaskets and 5 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from, which can be applied for different styles of clock frames, clock replacement or making your own customized clock project

Size information: the total length of the shaft is about 18 mm/ 0.7 inch, while the thread length measures approximately 11 mm/ 0.43 inch, which is suitable for clock panels with a thickness of 4 - 7 mm/ 0.16 - 0.28 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit

Practical and durable: the clock movement mechanism is powered by AA batteries (not included), and the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping

Package includes: you will get 3 clock movements, 3 sets of accessories, 3 wall clock hooks, 3 wall nails and 6 sets of different pointer kits, you can choose various styles according to your needs; The replacement parts are suitable for maintenance, you can also change or make your own clocks; Please note that the back is silver, and the front is as shown in the picture

Appropriate dimension: the total length of the shaft is approximately 18 mm/ 0.7 inches, and the thread length is approximately 11 mm/ 0.43 inches, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm/ 0.04 - 0.12 inches, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit

Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which are lightweight and corrosion-resistant, they are strong and durable, and can be applied for a long time, providing you with a nice usage experience and decorative effect

Package include: you will get 3 pieces clock movements (20 mm), 3 pieces gasket tools, 3 pieces metal hooks and 3 types of walnut wood clock hands, only suitable for 12 inches clock

Quality material: the clock hand is made of quality walnut wood, which has nice wear-resistant and scratch-resistant, and can serve you for a long time; The movement is made of ABS material, which also has outstanding properties, such as wear resistance, oil resistance, and impact resistance

Eye-catching design: the clock hand is made of walnut wood, which has a retro look and nicely match with your clock, showing elegance and charm

🕖【Package Including】1×clock movement, 1×hour hands, 1×minute hands, 1×second hand and some mounting hardware. (No Battery)

🕖【Easy to install】There is installation instructions in photo 6, follow the steps and takes a few minutes to get a nice clock.

🕖【Warm Tip】Please do not use too much pressure to avoid bending, please check the size before purchase, suitable for AA battery.

Package includes: the package comes with 10 kinds of black clock hands in various forms; With simple and stylish appearance, these clock movements can match various clock panels which are in different colors, patterns, and shapes; They will not stand out but work well with the clock

Size details: small black serpentine clock hands are suitable for clocks in 12 inches; For more size information, please refer to the details; With a high-precision clock mechanism, clock hands can provide the watchmakers with accuracy and reliability, letting them grip the time easily; They are equipped with sweeping movement, no ticking, giving you a quiet space and a calm mood

Reliable material: this serpentine clock hand is made of aluminum, safe and durable, with fine resistant corrosion and light weight, can be applied for a long time

INSTALLATION TIPS - 1. First fix the movement to the main body of the middle case. 2. Install the hour, minute, and second hands parallel to the 12 o'clock, 3. Pull out the positioning pin on the back of the movement. 4. Install the battery, it automatically searches for local signals. (Please use the double-sided tape to combine the clock mechanism with the clock face, otherwise, it will cause a time error)

RADIO CLOCK MOVEMENT MECHANISM - Auto adjusts time after summer time/winter time. Receiving the local signals could get a more accurate time, and free your hands in every year!

DIY WALL CLOCK REPAIR PARTS KITS - Radio Controlled Clock Movement Size: 2.6*2.2*0.74 inch (66*56*19mm), Shaft length: 0.67 inch(17mm), Screw thread length: 0.38 inch (9.7mm)，Fit about 7/64 - 13/64 inch (3-5 mm) thickness clock panel. With a hook, golden hex nut, golden metal washer, and black rubber washer.Suitable for 10-12 inches Clock

Suitable for cross stitch, craft clock, frameless picture clock, three-dimensional embroidery.

Suitable for repairing, replacing broken parts of a clock or as a good crafting material for making your own clock.

Clock movement kits are easy to install and have a simple and elegant design, these replacement parts can be matched with clock faceplates of various colors, patterns and shapes without being too conspicuous.