Best Bjerg Instruments in 2026

5 Pack of movements and hands is great for clock makers. Hands are suitable for a 10 inch clock diameter, and possibly other sizes. Check hand measurements listed below and decide if it fits your clock design!

Hour Hand: Full length: 3-3/4" and from center to end 3", Minute Hand: Full length 4-7/8" and 4" from center to end

Second hand: Full length 6-1/2" and from center to end 4-1/4"

SEALED AND WATERPROOF: Back of clock seals. IP44 tested and rated clock so you know it works.

QUARTZ MOVEMENT: Accurate ticking clock movement with a second hand.

USES ONE AA BATTERY: Battery is not included. Uses the common AA battery.

Sauna Thermometer. Pine wood, clearly visible, easy to use as sauna room accessory.

Traditional style sauna thermometer tracks temperature inside your sauna room.

Traditional Finnish / Russian Design Style 3" Dial Thermometer displays temperature up to 248 F.

8 inch diameter indoor and outdoor thermometer.

Easy to read 5.5 inch large round diameter dial face.

Simultaneous Celsius and Fahrenheit temperature display.

Large 12" Diameter Display. Easy to see from a distance and read the time.

Silent, Non Ticking Second Hand that Sweeps. You don't have to listen to loud ticking in a silent room.

Modern Design. Simple and elegant and looks great on the wall of your home, classroom, patio, dining room, kitchen or office.

Tabletop indoor thermometer works great on a desktop, shelf, countertop or other flat surface.

Indoor thermometer measures approximately 9 inches from base to the tip.

Stained wood body with sturdy steel base and tip with a bronze colored finish. Makes a terrific executive gift and office display.

8 inch diameter indoor and outdoor thermometer.

Easy to read 5.5 inch large round diameter dial face.

Simultaneous Celsius and Fahrenheit temperature display.

Large 12" Diameter Display. Easy to see from a distance and read the time.

Silent, Non Ticking Second Hand that Sweeps. You don't have to listen to loud ticking in a silent room.

Modern Design. Simple and elegant and looks great on the wall of your home, classroom, patio, dining room, kitchen or office.

12 inch diameter indoor and outdoor analog thermometer

Easy to read 6 inch diameter dial face and gauge. White dial face with bright red, high visibility temperature gauge.

Simultaneous Celsius and Fahrenheit temperature display.

8 inch diameter indoor and outdoor wall thermometer and hygrometer (humidity measurement).

Easy to read 5.5 inch diameter dial face. Hygrometer gauge / humidity monitor at the bottom.

Simultaneous Celsius and Fahrenheit temperature display. Adjustable.

Thermometer & Hygrometer. Pine wood, clearly visible, easy to use as sauna room accessory.

Hygrometer is tracks moisture content and thermometer tracks temperature inside your sauna room.

3.5" Dial Thermometer displays temperature up to 248 F; Humidity displays range from 0-100 percent.

Large 2.35" by 1.65" LCD Screen Is Easy To See. Now you don't have to squint! Each timer screen is 2.35" wide x .825" high.

Easy to Set. Hold down minute and second button to reset. One button for Start and Stop.

Beeps When Timer Goes Off. Easy to hear the timer go off so you don't miss it.

Large 12" Diameter Display. Easy to see from a distance and read the time.

Silent, Non Ticking Second Hand that Sweeps. You don't have to listen to loud ticking in a silent room.

Modern Design. Simple and elegant and looks great on the wall of your home, classroom, patio, dining room, kitchen or office.

8 inch diameter indoor and outdoor thermometer.

Easy to read 5.5 inch large round diameter dial face.

Simultaneous Celsius and Fahrenheit temperature display.

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).

Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.

Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).

Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm)

Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4-8 mm (4/ 25-3/ 10 inches) thickness clock panel

Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length

Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch)

Size: total shaft length: 15 mm (3/ 5 inch); Thread length: 6.7 mm (7/ 25 inch); Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel Note: Please check the size of the clock movement below prior to purchase to verify whether it can fit over your clock

Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.

Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.

Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs

Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Center of hole hand size: hour hand is approx. 90 mm (3.5 inch); minute hand is approx. 120 mm (4.7 inch); Second caps is approx. 7 mm (0.28 inch)

Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Two Pack Clock Movements are included. Accurate, High Torque and Dependable when in motion, and the second hand spins without any ticking. No Noise, provide a comfortable environment to sleep, work or study.

Six different style & size Clock Hands are included. An appropriate style & size set can fit for many clocks. All sets are good for replacement, repair and making of clocks.

The total length of the shaft of this clock Movement is 7/10in (17.5mm), with a thread length of 2/5in (10.5mm) that allows a clock face up to 3/10in (7.5 mm) thick. It can be used in a clock dial diameter from 4-1/3in to 9-6/7in by different clock hands set.

Package contents: 1 movement, 4 pairs of hands with different shapes, 1 Metal hooks, and some accessories.come with the specially designed protect box and instructions.

Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Choose the right clock mechanism:total shaft length is 13.5mm (17/32 inch),thread length is 5.5mm (7/32 inch); suitable for 1- 3 mm ( 3/64 -7/64 inch ) thickness clock panel.

Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs

Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Center of hole hand size: hour hand is approx. 90 mm (3.5 inch); minute hand is approx. 120 mm (4.7 inch); Second caps is approx. 7 mm (0.28 inch)

Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.

Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Nice DIY clock repair set: you will get 6 pieces of high torque long shaft clock movements and 6 different pairs of hands, along with 6 pieces hooks and 6 pieces pasters, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself; There are more functions waiting you to find out

Size details: the total shaft length is approx. 28 mm/ 1.10 inches, and the thread length is approx. 22 mm/ 0.86 inches; Sweeping movement is suitable for 19 mm/ 0.74 inches thickness of clock panel; Suitable size is for your easy use and storage

Accurate time keeping and quiet motor: the long shaft clock mechanism will give you great accuracy and dependability, along with sweeping motion, without ticking nosie and will provide you with a quiet environment, you can use it with confidence and convenience

PACKAGED WITH CARE: Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping

CHOOSE THE SUITABLE MECHANISM: this kit fit clock dials from 1/8 in - 1/4 in thick and is perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you

DECORATIVE CLOCK HANDS: Ornate sets for different options, perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge

Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs

Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Center of hole hand size: hour hand is approx. 90 mm (3.5 inch); minute hand is approx. 120 mm (4.7 inch); Second caps is approx. 7 mm (0.28 inch); Please check the size before buying