Best Bnineteenteam Guitar Pickup Covers in 2026

Always has a lack of screws for guitar repairing/installing? Now it's not a problem anymore!

The whole kit includes 10 types of screws for electric guitar, total 161 pieces. This is the upgraded version with a custom guitar shaped storage box with magnetic cover, and extra 12 sets of humbucker pickup screws in imperial thread which can be used for EMG, Seymour Duncan, Dimarzio pickups.

❥Pickguard Screws: 50 pcs ❥Tuner Screws: 25 pcs ❥Strat Bridge Mounting Screws: 12 pcs ❥Tele Bridge Mounting Screws: 12 pcs

Flush-mount alnico 5 magnets

Enamel-coated magnet wire and cloth-covered output wires

Deliver the full, booming lows, punchy midrange and clear high end of the bass that started it all

Genuine Fender replacement Stratocaster pickup covers

Set of three black pickup covers

Fits a variety of vintage and contemporary Stratocaster models; will not Noiseless pickups

Ideal for China made Epiphone guitar, most Epiphone guitar made in China since 2005

Humbucker pickup ring set - neck and bridge,Quality glossy surfaced plastic made.

Outside dimension: 91.8mm x 46mm (3-5/8" x 1-13/16"); Inside dimension: 70mm x 39.3mm (2-3/4" x 1-9/16");Mounting screw spacing: 3-5/16"X 1-1/2" (84.5 x 37.5mm)

Dimensions: Outside(L x W): Approx. 92.5 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 5.88mm (0.23 in); Bridge Ring Height: Approx.7.88mm(0.35 in). Please check the parameter drawing in the attached pics before placing your order.

Humbucking pickup ring set - neck and bridge, flat bottom.

Metal construction, durable and sturdy, not easy to deform. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

Dimensions: Outside(L x W): Approx. 92.4 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 8mm - 8.9mm(0.31 - 0.34 in); Bridge Ring Height: Approx.10.3mm - 10.6mm(0.41 - 0.42 in). Please check the parameter drawing in the attached pics before placing your order.

Professional quality - metal curved bottom humbucker pickup rings (2) in Black finish. Metal construction, durable and sturdy, not easy to deform.

Complete set - Includes both Neck and Bridge position humbucking pickup mounting rings with curved bottom. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

These Pickup Rings in black color are wonderful DIY parts for guitarists or luthiers.Compatible with electric guitar or other similar guitar parts,which are used to replace your old pickup rings.

It's so easy for you to install these two mounting rings with screws.(included 8PCS).

Metal construction, stable and sturdy and you needn't worry about deforming.

It is a very elegant item, sure to enhance theappearance of any electric,but be aware of its limitations

Outside Dimensions: 91.5mm x 45mm; Inner Dimensions: 70.5mm x 39mm

Spacing between pickup mounting holes: 77mm.

Different guitars may use different pole spacing pickups, if you want to get correct covers for your pickups, you must know the pole spacing of your current pickups.The pole spacing is very important for changing pickup covers,to avoid unfit problem, please be sure to verify the pole spacing of your pickups before ordering

Brass Material Humbucker Pickup Covers; Neck is 49.2mm(1-15/16") pole spacing measured from center to center and Bridge is 52mm pole spacing measured center to center

Overall dimensions approx. 2.75" x 1.5" x .635" (69.8mm x 38.1mm x 16mm)

Fits most Epiphone Les Pauls or other humbucker guitars, not Gibson Les Pauls

Space for humbucker pickup:70x39.3mm; Distance between two pickup height screws: 78mm; Frame height: 3x5mm and 7x9mm

Dimenison is the most important factor to prove whether these rings can fit your humbucker pickups perfectly, so please verify the dimenisons photo in the listing first

Made of plastic

3 Pickup Covers Pole Spacing: 52mm (You need to confirm the pole spacing of your 3 pickups when you want to change the covers)

The Volume Tone knobs fit 5.8mm diameter pots

Made of plastic

Top Length: 70.5mm; Bottom Length: 84mm; Width: 18mm; Height: 13mm; Two mounting screws distance (from center to center): 76.5mm

The pole spacing for the 3 pickup covers is 48mm/50mm/52mm

[Package Includes] 4 pieces x Plastic Guitar Pickup Covers.

[Material] Made from Plastic, full cover type without holes.

[Sizes] Overall size: 69x39x21mm/2.7"x1.5"x0.8" (LxWxH).

3 different sizes of 3pcs pickup cover are as follows: 48 mm (longest distance of center point of 6 holes of pickup cover is 48 mm, for pickup near neck). 50 mm (longest distance between center points of 6 holes of pickup cover is 50 mm, for middle pickup). 52 mm (longest distance between center points of 6 holes of pickup cover is 52 mm, for pickup near bridge).

Includes 3 pcs pickup covers, 1 volume 2 tone knobs and 1 switch tip.

Great guitar accessory and made of solid ABS plastic material

Genuine Fender replacement Jazzmaster pickup covers

Includes two aged white Jazzmaster pickup covers

Fits most vintage and modern Jazzmaster pickups

Electric guitar humbucker pickup ring cover frame is compatible with LP/SG electric guitar or other similar guitar parts.Come with screws.

Electric guitar humbucker pickup ring cover frame is made of high quality metal material,solid and durable to use, also has a long service time,anti-rust.

Outside Size: 92mm x 46mm/3.62 x 1.81in;Inside Size: 70mm x 39mm/2.75 x 1.53in; Color: Silver,Black, Gold(Optional).

These enclosed single-coil pickup housings are made of plastic for a durable, high-quality product with a long lifespan.

Plastic material, not easy to damage, not easy to deform. A great accessory to dress up your guitar by replacing broken or old pickup covers.

This single coil pickup shell is a great DIY part for the guitarist or luthier, compatible with electric guitars or other similar guitar parts, it's a great replacement accessory that works great.

PROFESSIONAL QUALITY - High quality plastic single coil pickup covers (set of 3).

TRADITIONAL FIT - Fits most Fender USA and Mexico Stratocaster electric guitars and many other similar brands.

POLE SPACING - 2 1/16" (52.2mm) *Please measure your instrument first to be sure*

Fits for electric guitar.

3 single coil pickup covers(The covers Hole spacing are 48, 50 and 52mm)

3 pieces Vintage style knobs-including 1 volume+2 tone(Cream with golden Arabic numerals scale)

Material: Solid ABS plastic. Color: Yellow/Cream.

Mounting Screws Space: 3 -1/16 inch (76.5mm); Mounting Hole Dia: 0.1inch(3mm).

String spacing : 48mm/50mm/52mm, each hole spacing: 9.6mm/10mm/10.4mm, knob fitting Shaft Dia: 6mm , tip size: 8.7*14.5mm.

The pickup cover compatible with Strat guitar pickup cover fender electric guitars,This pickup cover just compatible with SSS guitar.

Material:Plastic; Polepiece Spacing: 50mm; Each hole spacing:10mm.

Includes 3pcs pickup covers, 1 volume and 2 tone knobs and 1 switch tip.

Applications: Blues, classic rock, southern rock, jam, hard rock

Others: anti-interference

Position: Easel

Size:69x39x21mm /2.7" x1.5" x0.9" (L x W x H). Please check the size carefully!

Material:plastic. Thickness: 1mm

Will appropriately reduce noise.

Metal construction, durable and sturdy, not easy to deform.

Fine workmanship and durable in use.

Nice accessory to dress up your guitar. For guitar project or replacement.

Package includes one set of 3pcs pickup covers

The cover of this guitar single‑coil pickup is easy to install and remove

Material: brass ,Smooth makes your guitar more fashionable and beautiful

Electric guitar pickup cover is durable and sturdy, not easy to deform. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

Electric guitar pickup cover shiny black finish,durable plastic material,looks great on guitars.

Electric guitar pickup cover is mainly used to reduce noise.

Material: Metal construction, durable and sturdy.

Humbucking pickup ring set - neck and bridge, flat bottom.

Nice accessory to replace the broken or old pickup rings to dress up your guitar.

HIGH QUALITY MATERIAL:Pickup Cover is made of high quality brass material, solid and durable to use.Good texture with nice treatment, has a long service time.

FUNCTION:Protect guitar's pickup during musical performance, anti rust and stain-resistant,very useful to be used for noise control, and also a decoration for electric guitar.

TWO SLOT DESIGN:Two slot design, simple and classic, also a decoration for electric guitar.

FEATURE:The guitar pickup is made of high quality nickel material, very durable and long lasting.

EASY TO INSTALL:The distance from the center to the center of the pickup cover is 50mm, and the distance from the center to the center of bridge is 52mm.Easy to install and remove, convenient to use.

FOR MOST ELECTRIC GUITARS:The standard 50mm and 52mm pitch of this guitar pickup cover is suitable for most electric guitars.

Made of high quality copper, durable and lightweight.

Suitable for humbucker pickup of electric guitar.

Used for shining decoration and noise control as well.