Best Black Gun Holsters in 2026

Design and function: These Molle compatible locking belt clips are designed for attaching knife sheaths, gun holsters, mag pouches, flashlight holsters, emergency kits, and much more to any gear with a Molle compatible strap system. In addition, they also work quite well with virtually any item where a strap or belt is available for mounting to. This design, and its attachment hole mounting patterns, allow for both vertical and horizontal carry (and practically any angle in between).

Extreme attachment security: These Molle compatible belt clips can be unlocked and removed via a one-handed spring lock release. This same release has a built-in spring loaded slide-lock to secure the mounting to your belt, molle strap, or webbing. The Molle Compatible Belt Clip design is rugged and secure. The closure and spring safety "snap" in place in the locked position with positive authority. Once locked, the holster, sheath, or magazine pouch is secured tightly.

Super strong: Made from durable nylon polymer, HolsterSmith Molle Compatible belt clips are virtually indestructible. Each Molle lock compatible belt clip belt attachment features pre-drilled mounting holes that can be used as-is with standard hardware (see offer), or further drilled to a wider diameter to allow existing holster mounting posts to be used on holsters where these belt clips are being upgraded to improve original holster mounting.

Metal Belt Clip for Holster Making | ( Model 5 ) | (3-Hole)

Mounting Hardware Included = No

Belt Size: Up to 1.50 inch

ModWing - Universal Sheath and Holster Attachment

Ambidextrous (Left & Right Hand Carry)

Color: Tactical Black

Flush Mount Metal Belt Clip | Universal Sheath/Holster IWB Mounting Attachment

Size: Fits Belt Sizes Up to 1.50 inches

Hardware Incuded: No

Belt Clip | Model 3 - Universal Sheath and Holster

Mounting Type: Slip-Through Retainer

Size: (Fits belt size up to 2.00 inches)

Belt Clip | Model 3 - Universal Sheath and Holster

Mounting Type: Slip-Through Retainer

Size: (Fits belt size up to 2.00 inches)

Monoblock Belt Clip - (1 Pack)

Mounting Hardware Included = No

Fits Belt Size: Up to 1.50 inch

Works on most carry items: The Universal Model 1 Metal Belt Clip is designed to be mounted directly to a KYDEX holster, tool sheath, cell phone case, or other carry item surface. This spring steel mounting clip design allows for a secure carry on belts, waistlines, or any attachment point where the spring steel clip tab can be positioned securely. The Universal Model 1 belt clip is a versatile and cost effective attachment solution that can be adapted to virtually anything.

Secure and comfortable: This Universal Model 1 Metal Belt Clip attachment fits belts up to 1.75 inches. The spring steel tab mounting has an integrated upturned entry lip to assist in sliding it over the attachment point, a belt, or clothing waistline. This helps to avoid damage to your belt or clothing while putting it on. Behind the entry lip on this belt attachment clip is a retention ridge. This helps lock the belt clip over the belt, webbing strap, or waistline to secure it in place.

Tactical black finish: The Universal Model 1 Metal Belt Clip comes in a tactical black matte finish and is non-reflective. It resists corrosion and can be buffed with most over-the-counter lubricants to remove surface blemishes and wear marks that appear over time and use.

Belt Clip | Model 1 - Universal Sheath and Holster

SPTHA Mounting Hardware Included: Yes

Size: (Fits belt size up to 1.75 inches)

Deep Concealment Metal Claw - Universal Sheath and Holster Attachment

Material: Aircraft Aluminum

Color: Black

HOLSTEX Brand EDPM Synthetic Rubber: The EPDM rubber compound used by Holstex in our holster mounting and retention washers is the finest formula grade in the industry. With a strict Durometer of 60, our washers have the same flex and compression across the line. Our EPDM rubber resists hardening, discoloration, and loss of flex over time. This is the best EPDM compound for the job. Holstex mounting washers are used by professional holster makers worldwide.

Dimensions: (.500 x .180 x .125)(Inches)(Diameter x Hole Size x Thickness) - Each Holstex EPDM mounting and retention washer follows strict sizing.

Quantity: 100 Pack | Each package of Holstex EPDM Mounting and Retention Washers have been individually inspected, counted, and assembled.

Belt Clip | Model 7 - Universal Sheath and Holster

Mounting Type: Universal / Undrilled

Size: (Fits belt size up to 1.75 inches)

Pancake Loops for Kydex Holster Making

Quantity: 1 Pair (Mounting Hardware Included)

Size: (Fits belt size up to 1.50 inches)

Design and function: The Small Combat Loop locking belt clip fits belts and webbing from 1.50 - 0.25 inches and is the most advanced sheath and holster attachment introduced in many years. This belt clip mounting attachment works on KYDEX, HOLSTEX, Boltaron and leather tool sheaths, gun holsters, and virtually any item where a strap or belt is available for mounting to. This design and its attachment hole mounting pattern allows for both vertical and horizontal carry.

Extreme attachment security: The Combat Loop can be unlocked and removed via a one-handed locking spring closure release. This same release has a built-in slide-lock safety to secure the mounting to your belt. The combat loop belt loop design is rugged and secure. The closure and safety "snap" with rugged authority. Once locked, your holster, sheath, or magazine pouch is on for good.

Super strong: Made from durable nylon polymer, HolsterSmith Combat Loops are virtually indestructible. Each Combat Loop belt attachment features 9 pre-drilled mounting holes can be used as-is with standard hardware, or further drilled to a wider diameter to allow existing holster mounting posts to be used on holsters where these belt clips are being upgraded to improve original holster mounting clips.

Paddle Mount | Outside-the-Waistband Holster Mounting Attachment

Quantity: 1 Pack

Hardware Incuded: No

Each SPTHRA Holster Retention Assembly Includes:

(1) .500 Inch Slotted Post (Black Coated)

(1) .500 Inch Phillips Truss Head Screw (Black Coated)

Non-Functional & Safe: American Safety Mold Training gun simulators are 100% non-functional and safe to use. Each model is designed for practice simulation and non-live fire training use. Solid in construction with no moving parts, each American Safety Mold is colored Blaze Orange (Fed-Std-595B 12199) to meet all federal safety requirements. | Model: Compatible with S&W Shield 40

Fits your current holster: With an American Safety Mold non-live fire training gun, you’ll get a ultra-durable replication that will fit in any model-specific custom, production, or mid-tech KYDEX, leather, or nylon holster. This allows you to safely practice using “your” personal holster. American Safety Molds are precisely made and will fit your model-specific KYDEX, leather, or nylon holster like the original model.

Made in the U.S.A.: American Safety Molds are proudly made in the U.S.A. We manufacture each model to be the finest solid safety training gun available. We perform bench testing and quality control on each model. Each American Safety Mold trainer is inspected for fit, finish, and quality before sale. Holster making: American Safety Mold solid non-functional training simulators are a favorite molding prop for holster makers. These can be used for KYDEX and wet/dry Leather holster making.

Fabriclip | Holster Concealment Attachment

Ambidextrous (Left & Right Hand Carry)

Color: Tactical Black

Chicago Screws - Stainless Steel | Holster Mounting Hardware for DIY KYDEX & Leather Holsters

Size: #8 | Barrel Diameter: 0.203 (13/64) inch | Barrel Length: 0.250 (1/4) inch

Finish: Black Zinc