Best Bare Tool Hammer Drills in 2026

Product 1: 360-Degree Exhaust: The adjustable exhaust on the 109XPA high torque ratchet wrenches directs air flow away from you and your workspace.

Product 1: Low Profile Forward/Reverse Control: The 109XPA forward/reverse control has a wide diameter for increased ease of use in confined spaces

Product 1: Increased Reach: Enjoy easier access to deep, hard to reach spaces with these high torque ratchet wrenches.

Variable 2-speed design (0-500 & 0-2,000 RPM) (0-7,500 & 0-30,000 BPM) covers a wide range of drilling, driving and hammer applications

BL Brushless motor delivers 530 in.Lbs. Of max torque

Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge

COMPACT SIZE – The digital brushless motor delivers compact, lightweight power for extended tool life and precise hammering control in hard-to-reach areas.

3-POSITION ADJUSTABLE HEAD - Switch between 0, 45, or 90 degrees to hammer nails at a variety of angles for any job.

MAGNETIC COLLET - Holds nails (up to 3.5 in. long) in place for one-handed use, especially in hard to reach or tight areas like cabinetry.

Optimized 2.6J mechanism provides faster than corded Speed of Application

DEWALT electronics allow the tool to maintain speed through the entire application without bogging down even with the largest bits.

Durable German Engineered mechanism for long service life, even in the hardest concrete.

DEWALT 20V hammer drill has the brushless motor for efficient performance and runtime

The cordless hammer drill has 340 UWO of power to help get the job done

1/2-inch ratcheting chuck provides superior bit gripping strength

Powerful 6.5 AMP motor for heavy duty continuous work

Variable speed (0-550 RPM) for drilling in a wide variety of materials

Heavy duty 1/2"" drill chuck

Durable and Powerful Motor - Optimizes runtime and tool life. Provides up to 266 in./lbs. (30Nm) of torque.

Wide Application - 3/8” keyless ratcheting chuck with 16+1 position clutch ring features a quick bit change and adjustments to match torque to different applications.

Efficient Work – A 2-Speed transmission (0-400/ 0-1500 RPM) with variable trigger allows for effective control and precision on most ranges of work surfaces.

Lightweight design is perfect for small diameter drilling applications

7 amp motor provides the highest performance-to-weight-ratio in its class

360 degree auxiliary handle, built-in quick release depth gauge provide wide range of movement

INCLUDED: 18V Hammer drill with 1-36v battery and 1-18v battery

POWER: 620 in-lbs. to tackle a variety of applications

KEYLESS METAL CHUCK: Ensures a firm grip on the bit and easy bit replacement

All Metal Chuck: The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. Allowing you to change a variety of drill bits with ease. The maximum chuck diameter of this impact drill is 1/2'' (13mm).

Hammer & Drill Function 2-in-1: Switch the orange button on the top to select hammer or drilling function by your tasks. Drilling function for drilling holes on steel plates, plastic and wood, hammer function provides greater impact to make the drilling task more efficient and simple on concrete wall and masonry. Please note that this drill can't be used in reinforced concrete walls.

Powerful Motor & Variable Speed: The ENGiNDOT PID01A Corded hammer drill equipped with high efficiency industrial copper core motor, gives more power and durability, designed with variable speed, you’re able to set a suitable speed for different applications from 0-2800rpm.

✅【HIGH-PERFORMANCE BRUSHLESS MOTOR】: 20V MAX DC brushless motor eliminates carbon brushes,enabling the motor to run cooler and efficiently. Meanwhile, brushless motor is compact,dust-protected,lightweight,absolutely maintenance-free and durable.The high-performance motor enables the rotary hammer to deliver up to 0-1400 RPM,0-4500 BPM and 1.7J of impact energy,making it easy to drill in hard materials like concrete and more efficient for users.

✅【DURABLE LITHIUM-ION BATTERY INCLUDED】:POSENPRO PCRH20 rotary hammer contains a 4.0Ah large-capacity lithium-ion battery pack,featuring Cell Protection to protect against overloading, over-discharging and over-heating.Without the hassle of cables, it can offer unlimited freedom of movement.The high-performance battery provides huge power and maximum run time. Shared with POSENPRO/LANNERET 20V battery platform .(20V Fast Charger also included)

✅【MULTI-FUNCTIONS & SDS-PLUS CHUCK】: The hammer drill has 4 modes for 4-Mode selector—transition between drill,hammer drill, chisel,and chisel alignment settings,reducing time and increasing efficiency.It also features an innovative chisel adjustment option, which is used to manipulate the bit to the optimum angle.And the one-touch sliding chuck for SDS-Plus bits is used for quick and easy bit removal and installation.The rotary hammer meets the requirements of more working conditions.

Handle exhaust allowing the air to flow away from the operator

Lock-off throttle for more controlled applications

Compact low profile head to get into confined spaces

Powerful Motor: 9.5 amp industrial motor with 4.8 feet/lbs (6.5 joules) impact energy is designed to complete heavy-duty concrete and metalworking projects. Wattage: 1050W. The drilling capacity is different on various materials: 1inch/26mm for concrete, 1.4inch/36mm for wood, 0.5inch/13mm for steel.

Four Functions: SDS hammer drill's four different functions: Drilling is suitable for wood, steel, etc. Chiseling is ideal for concrete or brick. In addition, hammer drilling is ideal for heavy-duty work, and chisel position adjustment adapts to various work scenarios.

Variable Speed: Our rotary hammer can reach 850 r/min no-load speed and 4200bpm max impact frequency. Various applications can be completed by adjusting the 6 levels no-load speed variable trigger.

Variable 2-speed design (0-450 & 0-1,700 RPM) covers a wide range of drilling and driving applications

Makita-built motor delivers 250 in.lbs. of Max Torque

0-25,500 BPM for fast hammer drilling in masonry materials

Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience

Lock-on button for continuous use

Innovative anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue

3 DRIVING MODES: The P214 allows you to switch between 3 modes, one for screwdriving, one for standard drilling, and one for hammer drilling. No need to constantly adjust torque when there’s an easy-access switch on the top

2 SPEED GEARBOX allows you to affect dramatic rate of rotation changes for working between delicate and difficult jobs

LED LIGHTING located at the base of the tool, shining up to illuminate your job without casting distracting shadows over your fasteners

Milwaukee 4-pole frameless motor: features a robust design combined with rare-earth magnets for longer life, best-in-class 500 in. lbs. of torque and 0-450/0-1,800 RPM

Single sleeve ratcheting chuck: all-metal 1/2 in. chuck optimizes grip strength and reduces slippage

Built-in LED light: illuminates surfaces for faster, more efficient work

【Exceptional Performance】Powerful 1,700 Watts motor delivers maxmium 2,100 BPM and 45 Joules(33.2 ft.lbs.) of impact energy for rapidly chipping and chiseling, suitable for concrete road surface, trenching, heavy demolition of wall, etc.

【Lightweight & Ergonomic】Only 25 lbs, lightweight and compact design allows users to operate easily, horizontal or vertical in different workplaces. The main axis can rotate 360° and secondary axis can rotate 180° of D-shaped handle, while ergonomic grip area adds friction and operation stability.

【Easy to Operate】The 6-level available device can switch 200-2,100BPM, which is suitable for more work scenarios. SDS-Max bit system provides tool free bit change with automatic bit locking, and maximum impact energy transfer. Self-lock design avoids trouble of keeping pressing, make work more conveniently.

[1/2” CHUCK] Full-sized ½” chuck accommodates larger bits to handle heavy-duty drilling applications

[20+1+1 CLUTCH ADJUSTMENT RING] Use the adjustment ring to adjust between 20 torque levels, as well as kick on the drilling or hammer functions

[2-SPEED GEAR BOX] Switch the 2-speed gearbox to adjust between standard and heavy-duty drilling/driving speed modes

Reliable DeWALT brushless motor delivers up to 75% more runtime vs 18V NiCD brushed motors

Set "disable when out of range" alerts to deter unauthorized use or theft

Program up to three customized RPM settings for precise speed control

【Excellent Copper Motor & 21V LI-ION Battery】Heavy-duty copper motor is adopted for higher efficiency and durability with 0-1200 rpm rotating speed. 21V large capacity lithium-Ion battery provides longer running time with 2-hour fast charger to efficiently keep constantly running.

【Variable Speed Trigger & Switch Button】Equipped with a variable-speed trigger and variable-speed knob, you’re able to set a suitable speed for different applications from 0-5400rpm. Lock-on button reduces fatigue for long hours work. Forward & reverse switch provides convenience to tighten or loosen screws.

【Operator & Tool Protecion】This rotary hammer has a torque limiting clutch, which is engineered to automatically disengage gears if the bit binds, eliminating sudden high-torque reaction and preventing gear damage. The housing and interior are double insulated. The shell is made of high strength insulated nylon; the rotor and stator are internally insulated with insulating paper. Even if accidentally drilling into the wire, it will not cause electric shock.

Ergonomic grip and perfect balance for maximum working comfort

Built-in double LED in the tool foot for ideal illumination of the work area

Ultra-compact design for access in tight corners

Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer-life

Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces

Chuck type: 1/2 in. metal ratcheting single sleeve

【Aluminum Alloy Material】▲The pneumatic hammer is made of aluminum alloy, which is more corrosion-re-sistant, light in weight, and durable, so that it has high strength and hardness, having a long service life.

【Multi-material Hammerheads】▲The package includes a white aluminum hammerhead, a black steel hammerhead, and blue, red, and yellow rubber hammerheads so that it has a broader range of applications and can meet your various needs.

【Low Noise】▲The red, blue, and yellow hammerheads are all rubber heads that release low noise to weaken ear damage and you don't worry that they will damage the surface of the workpiece. And it is safe to use because there isn't a spark during operation using rubber hammerheads, which brings you great reassurance.

Speed no load, 0-1090 rpm

1.3 ft-lb impact energy

5040 blows per minute