Best Cruiser Handlebar Risers in 2026

Material:High Quality CRS-1215 Steel,Condition: Aftermarket 100% Brand New

These Riser Extension Kit is Designed to Adding 2'' Rise to Your Handlebars for a More Upright Riding Position That Alleviates Wrist and Back Discomfort

Please Make Sure Your Handlebar Riser's Hole Diameter is 1/2''

Machined from 6061-T6 billet aluminum, made for 1in. diameter handlebars

Available in chrome or anodized black

Universal (2-piece) design attaches to nearly any bar or clamping area with a 1in. diameter

The finest most effective pullback riser on the market

Provides immediate relief to those stretching to reach their handlebars. Relocates handlebar closer to the rider so that the motorcycle becomes easier to steer and control

Relieves shoulders, neck and back pain

Fits Motorcycle ATV Dirt Bike Kawasaki Honda Suzuki Yamaha.

Bars hitting tank when you turned, this is a common problem. OEM's fix is much more expensive.

The handlebar riser kit is very easy to install and increase the handlebar hight on Motorcycle ATV Dirt Bike.

Specification:

Overall height 2 7/8", bar size 7/8", overall Dimension at head 2'' x 1 1/4", height from base to center of handlebar 2 ", overall diameter at base 1 1/8 ", thread at base 1/2" coarse (13 threads/inch).

No installation guide

Specification: Overall height 2 7/8", bar size 1", overall Diameter at head 1 7/8", height from base to center of handlebar 2 ", overall diameter at base 1 1/8 ", thread at base 1/2" coarse (13 threads/inch).

EASY INSTALL , No installation guide

color : the same like pictures show

【Material】High quality Billet aluminum, gorgeous anodized surface without fading.

【Dimension】Overall height 7.1cm(2.8"),overall diameter at base 5cm(2"), bolt size about 1cm(0.4''). Please see pictures for detail dimensions.

【Comfort】Bolts gave just enough height for a more comfortable riding position, didn’t require any cable lengthening.

Package Included : A pair of handle bar risers with 1" bar diameter only.

Material: High quality billet aluminum

Total length 6.75"(170mm) / Hole diameter: 1"(25mm)

Material:High quality billet aluminum,Condition: Aftermarket 100% Brand New

anodized silver to protect the finish from scratches and corrosion.

Bringing your bars closer will improve rider comfort

Quick Fix – Keep your handlebars secure and looking good with these handlebar clamp risers

Universal – These handlebar stem clamps are compatible with a wide variety of mini bikes

Easy Installation – Can be installed in just a few minutes, no special tools or modifications are necessary

Easily install bars onto stock clamps

Fits for 7/8" diameters bar; Screw size: M8x120

Piranha Pit Bike CNC machined aluminum handlebar risers

Perfect Fit for 7/8" 22mm Handlebars; NOT Fit for 1" or 1+1/8" or 1+1/4". Please Make Sure the Size of Your Handlebar fit well before Buying It.

Adaptation: These Motorcycle Handlebar Risers fit Almost All Dirt Bikes and Atv with 7/8" Handlebars. Fit for Honda Grom MSX125/ CRF250L, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S, Yamaha TT-R230, etc.

High Quality & Light Weight: 6063-T6 Aluminum Alloy, and Anodized Surface Finish.

High Quality Chrome Billet Handlebar Risers

Condition: Brand new in box

Instructions: Not included

✔️HEAVY DUTY - Made by billet 6061-T6 aluminum with completely CNC machined, hard anodized and blasting surface treatemt. We DON'T USE CASTING aluminum.

✔️POLYMER ADAPTERS - APE Racing featured handlebar adapter made by high performance polymer which gives you the option of using either 7/8"(with adapter) bars or 1-1/8"(without adapter) taper bars.

✔️RELIABLE AND DURABLE - APE Racing risers are designed for tough application. Each riser have 4 high grade stainless steel bolts to make sure max life time.

Material: High quality billet aluminum

Bring the bars up and back will make the ride much more comfortable as your grip point is closer to you so you don¡¯t have to lean forward as much.

No need to get new cables while some Vulcan 800 models might need a cable reroute

Fits 2008-2021 Kawasaki Concours 1400GTR

Designed to raise your handlebars 2" upward and 3/4" closer to the rider

Allows a more comfortable riding position and a better control of the bike

Feature:Handlebar Supports with 30MM height，CNC-machined from high-strength aluminium alloy Premium quality, anodized surface finish

Fitment For most bikes with 22mm (7/8") diameter handlebars, these will raise your handlebars by 30mm.such as Kawasaki Honda Suzuki Yamaha Ducati and so on

Easy to install,No need to replace your handlebars for a more upright position

Quality Materials: Harley Straight Handlebar Risers are made of heavy-duty 6061-T6 aluminum alloy material and a CNC one-piece molding process! The solid structure makes it durable for long-lasting performance and not easy to break. The anodized finish presents a clean surface that is water-proof and rust-resistant!

Add Riding Safety: Our Club Style Bar Riser Straight handlebar riser for Harley is engineered to increase the rigidity and stability of the handlebar. This repositioning of the rider's grip point reduces the stress and pain most riders feel in their neck, back, and shoulders,which is more ergonomic than the straight handlebar riser.

Create Mounting Points: The motorcycle handlebar riser clamp kit can create mounting points for bikers to install their fork bag or handlebar bar bag so you can store or reach personal belongings more conveniently!

💡 Fitment: ✔For 2006-2016 Kawasaki Ninja 650R ✔For 2006-2016 Kawasaki ER-6F

💡 Function: Our Handlrbars directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.

💡 Functions: Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.

Investment-cast Steel one-piece top clamp and threaded lower mounting bungs

1/2-13 threaded holes on mounting bases accept stock H-D hardware

TIG welded 0.120" wall 4130 chromyl Steel uprights

Tusk Handlebar Riser 30mm Kit 1 1/8" Bars

Tusk Handlebar Riser Kit makes it easy to increase the handlebar height on your motorcycle or ATV.

Tusk handlebar risers are made from tough billet 6061 T-6 aluminum and come with high-grade 12.9 chromoly steel bolts.

Forbidden Motorcycles risers feature a 1 1/8in. clamping area for MX style bars

They come in 9in. and 11in. heights and raw or black anodized finishes

The top clamp is a one piece construction for extreme stability and durability

Brand:HTTMT

Overall height 2 7/8", bar size 1.25", height from base to center of handlebar 2 ", thread at base 1/2" coarse (13 threads/inch).

No installation guide

💖Made from 6061-T6 aluminum making stronger and more durable.

💖Anodized for a shiny long lasting finish,corrosion resistance and long time service.

💖Raise the Bars Aprox. 1.5".

Specification ： Handlebar hole diameter: 28mm（1 1/8"），Fixing bolt: 10mm; Bolt length: 69mm

Features 1：Through different combinations of thickness adjustment shims,Achieve four-level adjustable handlebar height

Features 2：Eccentric screw hole design, adjustable front and rear

EASY FITMENT▶️▶️ Here we present our motorcycle handlebar straight riser kit for best fit and integrated appearance.They fit for 2018 and up H-D Softail Street Bob and similar models with the digital gauge as part of the riser clamp.1" clamping area, works with factory 1" handlebar, 3.5" center on center riser spacing. Tapped to accept 1/2 x 13 bolts on bottom side(Bolts not included).Package content:Handlebar Risers withTop Clamp with 4 mounting screws,instruction is not included.

HEAVY DUTY HANDLEBAR RISER WITH ONE PIECE TOP CLAMP▶️▶️ The motorcycle straight handlebar riser for street bob is made of high-strength CNC machined from billet aluminum and CNC one-piece molding process for top clamp which has better strength,toughness and safety than the iron ones. The inner of the handle tube adopts CNC cutting anti-slip pattern, which can be more non-slip and stable. The precise position of the mounting screws can be cut to perfectly adapt the screw fittings.

TALL STRAIGHT HANDLERBAR RISER FOR MORE COMFORT▶️▶️ Our durable aluminium bar risers relocate the handlebar up and add more comfort during longer trips. The motorcycle risers for softail provides immediate relief to those stretching to reach their handlebars with 6 inch of rising and you will have the extra inch to better adjust your set up. Provides a more upright, comfortable riding position by raising the original diameter tubular handlebar, no need to replace your hand bars.

1 1/4" (32mm) taller**

1/2" (13mm) rearward**

1 1/2" (38mm) wider**

Motorcycle Hole Diameter: 1" new

Width: 1 3/4".Total Height: 5 1/4"

Height from bottom to center of hole: 2 1/4"

Aftermarket Parts 100% Brand New

14" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.

3-1/2" on-center knurling for firm mounting.37" wide from tip to tip.

Fitment: universal suit for Harley Cruisers,Choppers,Metrics with 1" bar diameter, pls refer to the size / type before purchasing.

Specification: color - black, material - billet aluminum, overall height - 5 1/4", hole diameter - 1", height from base to center - 2 1/4", thread at base - 7/16"

Features: made of solid and high-quality materials, water-proof, anti-rust and long lasting, easy to install and clean.