Best Rox Speed Fx in 2026

Pivots Backward/Forward based on Rider Preference 1 1/8" Stem (28mm)

Accepts 1 1/8" Handlebar (28mm), 2" (51mm) Center-to-Center Rise

Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers!

These risers will work on essentially any machine that has a stock 7/8" handlebar and open mounting area.

2" (51mm) Center-to-Center Rise

Accepts 7/8" (22mm) OR 1 1/8" (28mm) Handlebar

Machined from 6061-T6 billet aluminum, made for 1in. diameter handlebars

Available in chrome or anodized black

Universal (2-piece) design attaches to nearly any bar or clamping area with a 1in. diameter

Independent left and right risers adapt to any handlebar clamp width and herefore virtually any machine with 7/8in. bar clamps

Anti-Vibe design reduces vibration in bars

Provides a slight shock damping effect to help protect rider and machine

Super low profile 1-3/4in. center-to-center riser devolved to fit compatible with BMW F800GS or compatible with KTM 990 Adventure with stock lines and cables; also fits many other street, off-road, and dual sport models with a 1-1/8in. stem clamp and a 1-1/8in. handlebar

Handlebar clamps and can be pivoted to desired fore and aft location to achieve ideal riding position

Features an 8mm tap hole in the end of the posts to mount accessories

Independent left and right risers adapt to any handlebar clamp width and herefore virtually any machine with 7/8in. bar clamps

Patented pivoting handlebar risers mount on nearly any V-Twin with 1in. diameter handlebars and an open mounting area

Risers can be positioned forward, backward or anywhere in between to allow the rider to truly customize the feel of their bike

Bottom fits 1in. handlebar clamps; 1in. bar clamp on the top side

Move the handlebars 1-1/2in. up and 1in. back or forward from the OEM position (can be installed facing either direction)

Rox Flex-Tec Handguards are designed specically for snowmobiles and the needs of trail, racing and mountain use

Patented pivoting handlebar risers mount on nearly any V-Twin with 1in. diameter handlebars and an open mounting area

Allow you to adjust your handlebar height easily on the trail, or in the back

country, to increase your comfort by customizing your sled and its feel to you

Allow you to clamp a stock 7/8in. diameter handlebar, or you can remove the 7/8in. reducers and then clamp a 11/8in. oversize aluminum bar - reducers lock into risers to assure no slippage between components and serrated teeth ensure maximum gripping power on the handlebar

Move the handlebars 1-1/2in. up and 1in. back or forward from the OEM position (can be installed facing either direction)

Move the handlebars 1-1/2in. up and 1in. back or forward from the OEM position (can be installed facing either direction)

Independent left and right risers adapt to any handlebar clamp width and herefore virtually any machine with 7/8in. bar clamps

Anti-Vibe design reduces vibration in bars

Provides a slight shock damping effect to help protect rider and machine

For use with handlebars up to 40 inches wide

New design features glass filled injection molded polycarbonate cups with steel lay-in that replaces the old handlebar cuff and new webbing using heavier threads with more stitches for greater strength

Cups eliminate possible damage to soft grips and hold the cross straps further out on the bars to clear a wider variety of fairings and prevent damage to switch housings

This combo consists of Triceps V Shaped Press Down with high, polished chrome finish and T-bar Row both constructed with top quality solid steel.

V Handle (Double D Handle) is constructed of high-quality solid steel with textured surface for non-slip increase the secured and firm grip to your hands during workouts; provides a balanced force to both arms when attach it to any gym machine. Dimensions: 7.5”x7.5”x5.5” (LxWxH) and 0.53 inch hole can fit easily for all cable system

T-bar Row includes 2 bushings, with diameter 1” and 2” that can fit with any Standard and Olympic Bars respectively. Its highlight is the full 360 degree swivel and full range swivel up and down to vary exercises. It can be bolted to the floor with holes, coming with 2 secure tighten knobs to ensure your safety during the workout. Dimension: 9.3” L x 4.8” W x 6” H

DURABLE and STRONG - Made of high-grade 6061 aluminium alloy, Double Butted, Hard Anodizing and Numerical controlled precision bending

VERY LIGHT WEIGHT: 20mm rise 310g (11 oz) / 35mm rise 340g (12 oz)

SUPER WIDE: The 31.8 handlebar is 780mm wide, it's great width to help you control easily your mtb bike for all mountain extreme riding

Manufactured from cold drawn, seamless Air Alloy material

Internal taper increases strength and durability without adding weight

New ultra low and ultra wide riser geometry — reduces cockpit height to lower the front end (crown to axle height)

Manufactured from cold drawn, seamless Air Alloy material

Internal taper increases strength and durability without adding weight

New ultra low and ultra wide riser geometry — reduces cockpit height to lower the front end (crown to axle height)

Manufactured from cold drawn, seamless Air Alloy material

Internal taper increases strength and durability without adding weight

New ultra low and ultra wide riser geometry — reduces cockpit height to lower the front end (crown to axle height)

GREAT DESIGN WITH ALLOY HANDLEBARS: This DH Race tuned alloy handlebar is strong enough for even the most rugged terrains and light enough to maintain the most comfortable riding environment.

VIBROCORE TECHNOLOGY: Our unique core allows us to make handlebars that are super-stiff yet surprisingly comfortable. It comes with an advanced vibration dampening core that has enough stiffness to allow us to use super-thin tube walls without sacrificing comfort.

DUAL EXTREME GRADUAL TAPER TECHNOLOGY: The Dual Extreme Gradual Taper process starts with XGT at the bar clamping zone, through the bend zones, to the thinnest areas at the control zone and back to thicker bar ends.

ULTIMATE GRAVEL HANDLEBAR – The REDSHIFT Kitchen Sink Bike Handlebar is the ultimate gravel handlebar and bicycle handlebar for road bikes. The rise, sweep, flare, and compact drop combine to create a super comfortable bar that also enables you to get aero and maximize performance.

WIDE AND ERGONOMIC – Sizes ranging from 44-50cm wide allow for a broad range of fit. The 20mm of RISE and 7° of SWEEP on these wide handlebars for bikes relieves pressure on the wrists and hands and puts this bicycle drop bar where your hands naturally want to be - increasing comfort and reducing fatigue.

TRULY COMFORTABLE DROP POSITION – 25° of Flare combined with a shallow ergonomically shaped drop on this bicycle handlebar for road bikes gives you a stable, comfortable, and aerodynamic position when riding in the drops. No matter what the terrain is, this handlebar for bicycles provides superior stability, control, and comfort in the drops.

FREERIDE INSPIRED GEOMETRY DESIGN: The bar is an all-mountain-suited, freeride inspired, slightly oversized progressive and super fun ride.

ROCK SOLID IN THE PARK OR ON THE TRAIL: Built to withstand the toughest terrain, you’ll go everywhere in your Rock Solid handlebar, no matter the destination.

COST-EFFECTIVE UPGRADE TO YOUR COCKPIT WITHOUT SACRIFICING QUALITY: It's built to the same strict standards as the original parts. Our cost-effective alternative will make sure your cockpit is always safe and comfortable.

The Seven Eighths (SE) Handlebar represents the state of the art in 7/8" handlebar design.

High-strength aerospace aluminum alloy rated at 70,000 psi ultimate strength

Model/Bend: 758-01, Name: Road Ultra-Low; Dimensions: Overall Width: 725mm, Total Height: 75mm, Rise: 50mm, Clamp Area Width: 110mm, Sweep: 95mm, Control Length: 232mm

The Seven Eighths (SE) Handlebar represents the state of the art in 7/8" handlebar design.

Pro Tapers high-strength AS20 aerospace aluminum alloy SE Series Handlebar is rated at 70, 000 psi for ultimate strength