Best Snowmobile Powersports Handguards in 2026

▶FITMENT - Large hand guards fits Harley 2007-up Touring baggers and bikes with the larger switch housings;older model FXR'S with large switch housings.(One of the hand guards has longer mounting tag,it goes on the brake side,the short one goes on the cable clutch side. If you run a 2014 or Newer baggers with a hydraulic clutch , the mounting tabs don't need to be different sizes.If you mind how it looks like,you might need to modify the long one.)

▶FEATURES - Stylish,functional and durable hand guard,protect your hands from brush,rocks,mud and cold wind.Keep your hands warm and dry while riding.With enough room for brake cables control and other devices.Easy to install,don't need extra mounting hardware,just remove to the control boss of your mirrors.Some FXDLS models you may need to run turn signal relocation brackets for Harley turn signal swivel 68185-00.

▶PREMIUM QUALITY - Constructed of 16 gauge stainless steel with 12 gauge reinforced mounting tabs.

Most stylish, functional and durable hand guard to date

Sentinel offers you more protection with an updated look and great accessories

Made of two different types of plastic-a stiff two piece spine for durability, and a softer colored body for flexibility

Acerbis 2634661007 Handguards, black/white

Material:PP Plastic and Aluminum Alloy

Efficiently Protect Hands While Driving Reduce Your Hands Or Fingers Fatigue

Protect Your Hands From Brush, Rocks, Mud And Cold wind

See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.

Added wind /snow protection, sold in pairs.

Not compatible with 12 in. – 20 in. windshields

Note: Please carefully verify your motor's year and model in the product's description or check your parts' pictures, parts No. with ours before purchasing so as to prevent wrong purchases and unnecessary expenses.

Fitment: For Harley Davidson Touring Sportster Dyna 2007-2020 baggers and bikes with the larger switch housings like FXR's with previous controls.

Material: High performance of 16 gauge stainless steel with 12 gauge reinforced mounting tabs.

Upper and lower lids removable for maximum ventilation.

Universal mounting behind the pump.

Horizontally adjustable.

【Original Aluminum Bar】Avoid painting shedding. Still looks new after using for long time.

【Metarial】JFG ATV Hand Guards Use d High Impact PP Plastic and 6061-T6 Aluminum Alloy. Have higher impact resistance and strength than standard aluminum bars. More sturdy and durable.

【Fitment】Including d mounting brackets. Universal for a ,,,, Dirt Bike MX Motocross Motorcycle ATV Quad whose handlebars range 7/8" 22mm and 1 1/8" 28mm

Perfectly integrated design and style

Mirrors fold away when not in use for easy storage or when covering vehicle

Sold in pairs

See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.

Handguard Mounts are required, sold separately (Part # 2879380)

Protects hands and controls while enhancing style

Size: 248*106mm/0.81inch*0.34inch, Fit for most motorcycle with 22mm(7/8"/0.78 feet) handlebar

Material: High strength PP plastic guard shield and aluminum mounting kits

Fitment: Efficiently protect hands while driving. Protect your hands from brush, rocks, mud and cold wind.

To fit 7/8" handlebars.

Materials: ABS high plastic.

Efficiently Protect Hands While Driving.Protect Your Hands From Brush, Rocks, Mud And Cold wind.

New design delivers better protection and great style

Comes with black/grey colored interchangeable caps

Use with low and ultra-low windshield - for all handlebars

CNC Billet Handle Bar Hand Guards Protector Dirt Bike Motocross ATV for SX SXF EXC XCW and also fit most of dirt pit bikes of other brands and makes

Strong 7075 Billet CNC bracket and plastic shield provide maximum protection

Efficiently protect hands from wind and injury while driving your motorcycle.Reduce hand/finger fatigue, ensure greater motorcycle handling

[Material]:made of 6061 anodized aluminum for lightweight strength and durability.

[Usage]:Unique strap design allows your fit the mounting bracket behind master cylinders and over or under brake and clutch levers.

[Easy]: Very Easy to install

By mounting our handguards to the lower portion of the handlebar, we have increased clamping pressure, eliminated application variables, and provided unparalleled clearance for cable routing.

Made of durable materials

Hardware included

&#9733[FITMENT] - Universal Mounting Kits To Fit All Dirt Bikes, Enduro.Fit All Handlebars Range 7/8" 22mm and 1 1/8" 28mm.

&#9733[QUANTITY] -A Set Of Hand Guards And A Set Of Fitting Kit.Installation Instruction NOT Included.

&#9733[FUNCTION] - Efficiently Protect Hands While Driving .Reduce Your Hands Or Fingers Fatigue.With Enough Room For Brake Cables Control And Other Devices.

One (1) pair of hand guards

Handguards block wind, snow, ice, branches, etc.

Additional Mounts Required, 2881241-458, sold separately

One (1) pair of hand guards

Handguards block wind, snow, ice, branches, etc.

Additional Mounts Required, 2881241-458, sold separately

Rox Flex-Tec Handguards are designed specically for snowmobiles and the needs of trail, racing and mountain use

strap-on/off in seconds

custom wind foil shapes

tough stretch polyurethane straps

1.For schematic location 1 only

2.Made of high-quality aluminum, durable and rust-resistant，tough enough to handle anything your ride throws their way, keeping your handguards right where they should be

3.Fits: 2019 Indy /600 SP 129in/ 800 XC 129in/ 850 XC 129in/; 2019 Rush /600 XCR/ 600 Pro S/ 800 Pro S/ 850 Pro S/ 850 XCR/ ;2019 Switchback /Assault 600 144in/ 600 Pro S/ 600 XCR/ Assault 800 144in/ Assault 850 144in/ 850 Pro S/ 850 XCR/

Compatible with Polaris Snowmobile specified models, pls. refer to compatible list for details. Replace #2879193, including Mounting Brackets(replace #2880939); Note: Not compatible with 12 in.–20 in. windshields

Extra protection for your hands and controls in all kinds of riding situations, guard hands from wind, snow, ice, scratches

Durable high-density polypropylene, with impact resistance and friction resistance

Full wrap around (2 point mount)

Fits handlebars with outside diameter of 22-26mm

Fits handlebars with inside diameter of 13-18mm

<b>Easy to Install</b>— More space around levers are allowed because the shape of the mounting bracket has been changed. It can be installed over the top or underneath the levers.

<b>USAGE</b>— It just requires 1/2" space to install

<b>DURABILITY</b> - Metal bracket, not easy to deformation and damage, external covered with rust - proof coating, longer service life.

ultimate hand protection

flexible yet durable

water proof

The product is made from high quality ABS High Impact plastic+LED material, which is not only durable but also stable to use for a long-lasting life.

Fitment:Mounts to 22mm (7/8") Handlebars With Internal Handlebar Diameter Between 12mm-17mm,Very cool design aftermarket hand guards for scooter,ATV,MX,snowmobile and dirt bike.

Features: Reinforced to protect your motorcycle in the event of a crash.Efficiently protect hands while driving. Protect your hands from brush, rocks, mud and cold wind.

Universal: This motorcycle handlebar guard fits most motorcycles/cruising/helicopter/scooters with 22mm (7/8") standard handlebars, such as Honda, Kawasaki, Suzuki, Yamaha Great for off-road/motorcycle/dual use/snowmobile/ATV use.

Features: This dirt bike handguard can protect your hands from brushes, rocks, mud and cold wind while driving, reduce hand or finger fatigue, make your riding safer, and avoid secondary damage when you fall harm.

Well-designed: The flex of the dirt bike handguards matches the shape of the handlebars, and there's plenty of room for control cables and other equipment.

Over 30 years of experience with the best off-road racers in the world, Acerbis has enriched their constant technical development, allowing them to become a premier company within the motorcycle industry.

Compatible with Ski-Doo REV Gen5, Neo, REV Gen4, XS, XM, XP, XR, XU Models; Replace #860200789; Requires handguards for installation (ASIN:B0B6VP6X8J)

Made of high-definition view mirror and high quality ABS plastic; Adopt convex mirror surface to provide a wider view; 360° rotatable and adjustable mirror, and adjustable for different sized riders

Matte black finish, consistent with sleek design of your vehicle, which can adjustable in and resist damage in tight situations; Can also be folded up when not in use, does not take up any space