Best M4 Hardware Spacers in 2026

320PCS M3 Male Female Nylon Hex Spacer Standoff Screw Nut Threaded Pillar PCB Motherboard Assortment Kit (Black)

M3 Black color total 320 pieces. Come with the plastic box. High quality.

All products are made of durable nylon, Strong, anticorrosive. Appropriate to meet you different needs

Product Name:M3 nylon hex spacers/screws/nuts assorted kit

Multifunction:the Assortment come with nylon hex spacers,screws,nuts and stand-off, sturdy and lightweight

Application: PDB and flight controller stack building, motion sensor mounting, Arduino microcontroller board building, Naze32 controller board building, etc

【Material】Made of durable brass material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using.

【Sizes】 M2 M3 M4 brass female to female standoffs length is 5mm, 10mm, 15mm, 20mm; The screw size is M2 M3 M4, the thread pitch is 0.4mm, 0.5 mm, 0.7mm, total 420 pieces/30 sizes of the most commonly used spacers screws nuts in a plastic case, different size can satisfy your different needs.

【Design】Brass standoffs is a fastener used to create space between two objects, often to properly position them. In the world of electronic components and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears.

【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build.

【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment.

【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too.

【Material】Made of durable brass material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using.

【Sizes】 M2 M2.5 M3 brass female to female standoffs length is 5mm, 10mm, 15mm, 20mm; The screw size is M2 M2.5 M3, the thread pitch is 0.4mm, 0.45 mm, 0.5mm, total 420 pieces/30 sizes of the most commonly used spacers screws nuts in a plastic case, different size can satisfy your different needs.

【Design】Brass standoffs is a fastener used to create space between two objects, often to properly position them. In the world of electronic components and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears.

StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 3/4" (20mm) of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheel bore needs to be no smaller than 72.6mm.

[SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 3/4" (20mm) Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.

StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 10mm of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheel bore needs to be no smaller than 72.6mm.

[SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 10mm Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.

StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 1.0" (25mm) of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheel bore needs to be no smaller than 72.6mm.

[SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.

StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 1/2" (12mm) of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheel bore needs to be no smaller than 72.6mm.

[SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 1/2" (12mm) Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.

Package Content: 320pcs M3 Hex Spacer Standoff Kit, sufficiont quantity to meet you different needs. Comes with the plastic box, all the parts are in their individual compartments - spacers, screws, nuts and stand-off.

Material: these standoff kit is made of high quality nylon, durable, sturdy, anticorrosive, lightweight. Color: Black. This is needed if you're building drones.

Easy to Use: the M3 Hex standoff kit is very easy to install, convenient and practical small tools in your life. Compact and Portable.

Package includes 380 pcs M3 black nylon hex spacer motherboard standoffs kit with various specifications of hex spacers, screws, washers, and nuts to meet your different demand.

All of those small standoffs and spacers are well packed and classified in different grids of plastic box for easy to use and store.

Those M3 motherboard standoffs are made of high quality nylon, light weight and solid for long time use.

Nylon Round Spacer Assortment Kit.

Length 3mm ~ 20mm, 10 values (each 10 pieces),

Outer diameter: 7mm / 0.276", internal diameter 3.2mm / 0.126".

1.Material: Brass and stainless steel

2.Brass Straight Knurl Standoff/ Stainless Steel Screws/ Nuts Assorted Kit

3.Quantity: 600pcs. Come with the plastic box

Product Name : Standoff Hexagonal Spacer;Thread Size : M3 Male to Female 4mm+9mm

Overall Size(Approx) : 13 x 5mm / 0.5" x 0.2" (L*Max.D);Material : Brass

Color : Gold Tone

DURABLE-Made of brass durable material and stainless steel nuts which properties are rustproof and strong.

NICE COMBO ASSORTMENT-We have M2 M3 size in this kit. Male female hex brass spacer standoff screw nuts all in a separate compartment and sit nicely in a plastic case. Compact and portable kit to carry to everywhere.

MULTIPLE SIZES-M2 threaded pillar assortment kit, 120pcs from 3-20mm standoffs; M3 brass spacer standoff screws assortment kit from 3-20mm, making it all total 240pcs.

Material : Nylon, Screw thread : M3/(3mm), thread pitch: 0.5mm

Nylon Hex Spacers/ Screws/ Nuts Assorted Kit

Total 180 pieces, complete specifications and types, with reliable quality

Premium Material: These standoff spacers are made of excellent nylon material with smooth edges, which is non-toxic, corrosion-resistant and strong for long-term use.

Easy to Use: These male female hex standoff spacers are useful small tools, easy to install, for the safe and gentle installation of most modules and bring a lot of convenience to your life.

Easy to store: All board spacers for screws are packed in a plastic storage box, all spacer mounting parts are in their individual compartments, easy to store and carry.

★★★★★ Female Thread Size: M3 ; Hex Side Width: 5mm / 0.2-inch ; Hexagon Pillar Length: 13mm / 0.51-inch Material: Brass ; Color: Gold Tone ;

★★★★★ Easy to install: These standoffs are useful small tools, very easy to install, and bring a lot of convenience to your DIY projects;

★★★★★ Material: made of brass, resist rust, practical, durable and convenient for using and rust resistance, and easy to use;

Product Name : Standoff Hexagonal Spacer;Thread Size : M3 Male x M3 Female

Male Thread Length : 5mm;Body Length : 5mm

Overall Size(Approx) : 10 x 5mm / 0.4" x 0.2" (L*Max.D);Material : Brass

【High qulity】The Round Nylon Outlet Spacers have good insulation, good flame retardant, excellent workmanship, which have good temperature resistance, oil resistance, corrosion resistance and tear resistance and is durable for a long service life.

【14 Sizes】M3-OD 7mm, ID 3mm;M4-OD 7mm,ID 4mm.80 pieces 3x7x5; 50pieces 3x7x5; 40 pieces 3x7x6; 35 pieces 3x7x8; 25 pieces 3x7x10; 20 pieces 3x7x12; 20 pieces 3x7x15; 80 pieces 4x7x3; 50 Pieces 4x7x5; 40 pieces 4x7x6;35 pieces 4x7x8; 25 pieces 4x7x10; 20 pieces 4x7x12; 30 pieces 4x7x15. A total of 550 pieces, suitable for most screws.

【Powerful Functions】These rubber spacers are lightweight, rustproof, stable and insulated. Just measure the length you need for your screws, then choose the proper spacers shorter than the screws, to hold the plate flush against the wall.

[PREMIUM ABS MATERIAL] Tandagy round plastic spacers are made of premium ABS material, featuring high temperature resistance, oil resistance, corrosion resistance and tear resistance. Reinforced nylon rubber material of black nylon round gasket will last its use time and improve its service life.

[14 SIZES] The inner diameter of the round spacer assortment kits is 3MM + 4MM and outer diameter is 7MM. Comes with 7 diverse lengths, including 3MM 5MM 6MM 8MM 10MM 12MM 15MM. Various specifications are suitable for various screws, featuring flexiblility and washability to fit most applications.

[EASY TO STORE & IDENTIFY] All electrical outlet spacer comes with a box with size label for easy transportation, safe storage, and quick organization. Easily identify different sizes and quantities. All total is 320 pieces, is sufficient for your fixation in daily life and work.

High Quality:Gold tone plated brass construction hex standoffs,great corrosion resistance for outside applications,ensuring quality and longevity.

M3 brass hex standoff:Female thread length:12mm;Hex side width:5.2mm.We have marked the specification of the bracket in the picture 4.Please contact us if you have any questions.

Design:Brass spacers are fastener used to create space between two objects, often to properly position them.Standoffs spacer is used to keep the motherboard above the case,prevents motherboard from shorting out and helps cooling.

High Quality:Gold tone plated brass construction hex standoffs,nickel-plated carbon steel nuts and screws, great corrosion resistance for outside applications,ensuring quality and longevity.

Design:Brass standoffs are fastener used to create space between two objects, often to properly position them.Standoffs spacer is used to keep the motherboard above the case,prevents motherboard from shorting out and helps cooling.

Easy to Use:The M3 standoffs are very useful,they are very easy to install and adjust the selected step or rise.