Best Tresound High Mount Stop Light Assemblies in 2026

Direct Fit: for 2004 2005 2006 2007 2008 F150, 2007 2008 2009 2010 Explorer Sport Trac, 2006 2007 2008 Lincoln Mark LT; not for F-150 Heritage SVT Lightning or Explorer;

Bright Sparking LEDs: Full LED light source ensures great vision and brake/reverse indication, enhance safety during driving; LED 3rd BRAKE LIGHT REPLACE Part Number: 7L3Z-13A613-B;

IP65 Waterproof: This bake light case is padded with foam back and is perfectly sealed around. The foam gasket is designed for water-proof. As long as there is no gap between the car and the foam, water will not leak into your car;

Compatible With 1999-2016 Ford F-250/F-350/F-450/F-550 Super Duty 1993-2011 Ford Ranger

Waterproof: This LED third brake light is IP67 waterproof, prevent from dust, mud, snow or heavy rain. UPDATE VERSION: according to customers' advice, we have already increased the LED brightness, especially the white cargo light; and adjusted the cargo light angle, white light will shine into the bed of the truck, super bright!

Sturdy Lens:High Quality 3rd Brake lights made by OEM approved manufacturers with materials that meet strict OEM requirements

Package includes 1pc Rear high mount third brake light, compatible with Silverado 1500 2500 HD 3500 HD and Sierra 1500 2500 HD 3500 HD 2007 2008 2009 2010 2011 2012 2013 Led 3rd Brake Light Tail Light Lamp and also replacement for Silverado 2500 HD 3500 HD 2014 and Sierra 2500 HD 3500 HD 2014;

About Silverado third brake light: Chrome Housing Red lens, Super Bright full LED lights. Don't have to worry about incandescent light bulbs blowing or fading overtime; Installation is easy, please clean the truck area and lip on light with alcohol. Then, attached to the light first. Rubber Washers are included; Note: please save your two screws because the screws are not included with the new lights. It will add a more modern look to your truck with LEDs instead of incandescent bulbs;

Waterproof: This Sierra third brake light includes 1pc foam gasket and is generally waterproof. Please kindly put a little silicone or some clear RTV all across the top to help seal it just in case it leaks into the light or where the wires are;

This Thin-design, low-profile 17" Identification Light Bar or S/T/T Bar Can be mounted horizontal, vertical or at an angle, Slim design for use where space is a premium; Powered by 40 high power NICHIA Super FLUX LED's emitters with 460 lumen lighting output; This is a MUCH Brighter bar and improves both style and safety

Functions: This Low-profile trailer tail light serves 3 functions on trailers over 80" wide: Stop light, Tail light, Turn signal light, Also you can use it as Center Mount Third 3RD Brake Light, Led Clearance Lights bar, Led Marker Light Bar, Led Identification light Bar, id light bar etc.

Wiring: White Wire is the Ground; Red Wire is the high brightness; Gray Wire is the low brightness.

This RV tail light serves four functions: stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;

This rectangular trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;

This Triple LED Trailer Light is hardwired with 6 wires: White is the ground, Blue is backup/reverse light, green and yellow is high mode for stop or turn signals, black and brown is low mode for tail or running lights;

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;

These Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat mount, whatever suits your application;

This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal;

[Package Content] 2pcs 3x5 Rectangle Led Tail Lights, Grommet Mount and Hardwired with 3 wire pigtails;

[Features] This 5x3 Red Tail Lights features 12 pcs super bright LED's that will help enhance your car's visibility even on foggy days and keep you and your loved ones safe. Serves as stop light, turn light, tail lights. NOTE: we call it 3x5 Rectangle tail lights on market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it. For more information, please check the image1;

[HARDWIRED WITH 3 WIRES] White Wire is the Ground; Red Wire is the high brightness as stop/brake/turn signal lights; Black Wire is the low brightness as tail/running lights;

Partsam ( 2 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Clearance Marker and Auxiliary Stop Tail Turn Light.

Led Side Marker Light, Fender Marker Light, Clearance Light, Indicator lights, Aux stop turn tail brake light etc.

Can be used as an aux lighting to your existing brake light, but not approved as a brake light.

Package includes 1pc Rear high mount third brake light,compatible with F250 F350 F450 F550 Super Duty 1999 to 2016,Explorer Sport Trac 2001 to 2005,Ranger 1993 to 2001,B2300 1994 to 2009,B3000 1994 to 2007 and B4000 1994 to 2009 Led 3rd Brake Light Tail Light Lamp(NOTE: only Fit Models with Cargo Lights,non cargo model may need some modification); Part Numbers: YC3Z13A613BA, CC3Z13A613B;

About F-series third brake light: Chrome Housing Red lens, Super Bright full LED lights. Don't have to worry about incandescent light bulbs blowing or fading overtime; Installation is easy, please clean the truck area and lip on light with alcohol. Then, attached to the light first. Rubber "O" Ring Washers are included; Note: please save your two screws because the screws are not included with the new lights. It will add a more modern look to your truck with LEDs instead of incandescent bulbs;

Waterproof: This B-Series third brake light includes 1pc foam gasket and is generally waterproof. Please kindly put a little silicone or some clear RTV all across the top to help seal it just in case it leaks into the light or where the wires are;

This Listing includes 2Pcs Bright 35 LED Tear Drop Tail Lights (some customers DIY it as saddle bag lights) with Red Lens and Stud Mount Chrome Bezels. We add nuts to the package according to customers' suggestion.

Unit is supplied with 3 wire plugs for ground, brake/turn and tail light. (Black wire - ground, White wire is low brightness and Red wire is high brightness). if your stock part is the same as ours, you can make it plug and play, however, if the different plug, you need to cut the plug and rewire it; Note: if the taillight and stop light function properly, but the turn signal does not, please replace your existing flasher unit with an LED compatible flasher unit.

Light is secured by the 2 studs (5.21" apart) on the chrome bezel; Two Screws are included for mounting;

Package includes 1pc Rear high mount third brake light, compatible with 1988 to 1998 Silverado, 1988 to 1998 C10 C/K 1500 2500 3500 Full Sized Truck, 1988 to 1998 GMC C/K 1500 2500 3500 Full Sized Truck and 1988 to 1998 GMC Sierra LED 3rd Brake Light Tail Light;

About Silverado and Sierra Third brake light: Chrome housing, Polycarbonate Smoke Lens offer superior UV protection and a high impact resistance; Lamp Type: Brake and Cargo and Reverse; For Models Originally Equipped with Cargo Lights Only (Non Cargo Light Model might Need Modification to Prevent Light Function Issue)

Plug and Play: This 3rd brake light is plug and play. We also have some customers told that their plugs were different from the factory plug so they had to be cut off and spliced. The wiring tips are as follows(colors of the truck wires and light wires do not match): Truck Red to light's white, Truck yellow to light's red, Truck black to light's black and yellow (some customers may have to cut the yellow wire from the light plug and some other do not, it may depends), Truck white was not used;

Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation;

These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug; These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install; IP65 waterproof and please do not use it under water;

Easy to install: White is the ground, red is the high brightness and Black for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt DC Input;

Package includes 2Pcs Universal Square 12V Combination 38 LED Signal Tail Light; Each one is equiped with 38 Super bright LEDs: 16 Red LEDs for stop/turn/tail functions, 18 White LEDs for backup function, 4 White LEDs for license illuminator; Both are set up for license plate lights as well as reverse lights;

These rear combination tail lights have studs on back sticking out will bolt to any flat surface; This is not a replacement for Wrangler YJ CJ JK tail lights, not factory mount. If you want to install it on wrangler trucks, you may need some modification: There is no wiring harness so you have to splice the wires yourself. Also, The bolt holes are larger than stock so you will need to drill out your body to make them fit. The entire assembly is a touch larger than stock as well;

DOT Compliant for street legal lighting. 12 volts; Low ampere draw; 3-stud mount design is easy to install on any vehicle exterior and the distance between the mounting blots is 2" ~ 2.2"; Resistant polycarbonate housing and acrylic lens provide weatherproof protection against water, shock & vibration;

Partsam (Pack14) 6.5 inch Peterbilt-style LED marker/clearance light. Amber Color in Clear Lens. Surface mount. 9~14.8V DC;

It comes with three wires and brings you high low brightness ( Dim Bright Function). Dim Functions as side marker light, Clearance Light, Running Light or Cab Marker Panel Light; Bright Function as Turn Signal Light, stop turn tail light etc.

Dimensions: 16.5cm(6.5") x 5.5cm(2.15") x 2cm(0.79"). hole to hole distance:4.65" can be function as marker light, stop turn tail light; fits in a combo-style hole; 16 high-flux LEDs consume less energy than incandescent lamps; Waterproof, sonically-sealed lens and waterproof housing;

This smoke lens rectangular trailer light serves four functions: stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs, but in clear lens in the center. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;

This taillight has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;

This Triple LED Trailer Light is hardwired with 6 wires: White is the ground, Blue is backup/reverse light, green and yellow is high mode for stop or turn signals, black(with 1/3 yellow) and brown(with 1/3 green) is low mode for tail or running lights;

Package includes 2 pieces 4 1/2" Square Heavy Duty Chrome Square Double Face Smart Turn LED Pedestal Lights. These LED Double Face Turn Signal Light have versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees. You can mount it with 1 stud or 2 studs. And the mounting hardware for studs or bracket are included;

These double face truck lamps come with new upgrade pattern design and are different from other dual face led lights on the market. With the built-in smart dynamic chips, it will help to sense turn signal for sequential pattern. This square pedestal light come with 4 wires: white is ground, yellow is Turn signal function with Sequential array pattern, red is high function with all 26LEDs lit (non-sequential) and black is low functions with full lit (non-sequential);

This dual face led trailer light is made of polycarbonate lens and chrome die cast housing, has Amber lights on one side(26LED) and Red lights on the other side(26LED) and an Amber side marker Light(4LED); Size: 4 1/2" (L) x 2 2/5" (W) x 4 1/2" (H) with 2" stud distance, diameter of the middle stud is about 2/5";

Package Includes 2x led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also, mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.

These Triple Vertical Taillights include 3 lenses: 2Pcs replaceable red led stop or tail lights, and 1 of them with 1Pc clear backup light with red reflex lens border and white LEDs (built-in reflex reflector removes the need for a separate reflector) in the center, 1Pc amber/yellow turn light; This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat-mount.

8-Wire Connection: White Wire is Ground(Negative), Blue Wire is Backup/Reverse light, Red Wire is high brightness for Stop or Turn Signals, and Black Wire is low brightness for Tail or Running Lights. NOTE: If upgrading from halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal.

This Dual LED Trailer Tail Light serves four functions: stop light, turn signal light, and taillight, and backup light, this is white LEDs. It is a really nice rectangle led stop turn tail light for the back of your trailer, RV, Camper or motor home. This led taillight is universal design and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;

This Rectangle LED trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;

This Double LED Trailer Light is hardwired with 4 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop lights or turn signals, black is low mode for tail lights or running lights;