Best Uxcell Hole Saws in 2026

SIZE - 12mm(0.55-inch) Drilling Diameter, 6.5mm(0.26-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.

DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.

NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.

SIZE - 65mm(3.56-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.

DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.

NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.

Specifications: Cutting dia.: 48mm / 1.89"; shank size: 10mm / 0.39"; cutting depth: 25mm / 0.98"; overall length: 101mm / 3.98"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters

Wide Applications: Carbide hole saw provides fast and precise cuts into stainless steel, alloy, aluminum, cast iron, and other metals up to 5mm, also suitable for opening holes in plastic, wood, plywood, cardboard, round or square pipes, equipment cabinet, spherical door locks.

All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works. The special hole design is conducive to small chip resistance and more convenient operation. It adopts thickened and sharp tungsten carbide teeth.

Product Name : Glass Hole Saw;Main Material : Metal

Cutting Hole Diameter : 8 mm / 5/16";Shank Size (Approx.) : 18 x 5 mm / 0.7" x 0.2" (L*D)

Total Length : 51 mm / 2";Color : Silver Tone

SIZE - 5mm(1/5-inch) Drilling Diameter, 4.5mm(0.18-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.

DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.

NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.

70mm hole cutter It is safe to use. The spindle structure of the hole saw is firm, and it is not easy to fall off and shake after being fixed

Smooth cutting, suitable for drilling in wood, thin metal, plywood, plastic and dry wall, cutting smooth holes in the above materials

70mm hole saw Convenient chip removal, unique hole design can easily remove chips, improve drilling efficiency

SIZE - 125mm(5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.

DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.

NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.

Hole saw is made of high speed steel, impact resistance, wear resistance.

18.5mm Hole Saw cut clean, round holes in iron, aluminium, alloy, plastic, wood, etc..

Hole drill bit is with special heat treatment, sharp edge, high strength.

SIZE INCLUDES: 3/4" hole saw, 7/8" hole saw, 1-1/8" hole saw, 1-1/4" hole saw, 1-1/2" hole saw, 1-3/4" hole saw, 2-1/8" hole saw, 2-1/2" hole saw, 3" hole saw, 3-1/2" hole saw, 4" hole saw, 5" hole saw, 6" hole saw, which is 19mm, 22mm, 29mm, 32mm, 38mm, 44mm, 54mm, 64mm, 76mm, 89mm, 102mm, 127mm, 152mm hole saw.

HIGH QUALITY: Made of premium heat-treated carbon steel, blackening coating with oil. The hole saw kit has the advantages of high performance, oil resistance, rust resistance, durability and long life. Not suitable for hard materials.

PORTABLE STORAGE CASE: This hole saw set for wood comes with a customized case for portability and storage. Designated slots in the case keep every piece in place and improve work efficiency.

Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.

Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.

Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.

The best cutting for asphalt, brick, concrete, dry wall, gypsum, Limestone, marble, MDF, tile, wood, composite, plastic, etc; Carbide Tip Pilot Drill bit is required for cutting some materials

Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass

Quality Carbide Teeth have high hardness, outstanding wear resistance, a tendency to stay sharper to cut fast abrasive tough material

Product Name : Glass Hole Saw;Main Material : Metal

Cutting Hole Diameter(Approx.) : 10mm/0.393";Shank Hole Diameter : 4mm/0.15'';

Total Length : 50mm/1.967";Color : Silver Tone

The best cutting result for drilling in the thin metal sheet, pipe, plastic, wood, composite, etc. Not for Asphalt, Brick, Concrete, Tiles, etc

Fit to arbors with 5/8-18 UNF Thread; 1-1/2 Inch Cut-depth for gengeral cuts; Easily cuts through materials in one pass

Precision Vacuum hardened 4/6 TIP teeth increase abrasion resistance, roughness, and sharply tool life

Specifications: Cutting dia.: 26mm / 1.02"; shank size: 10mm / 0.39"; cutting depth: 20mm / 0.79"; overall length: 66mm / 2.6"; non-slip triangular shank. High density carbide tooth hole cutter is with longer life than normal carbide and metal cutting hole cutters

General Purpose: Can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals. Suitable for round or square pipes, equipment cabinet

All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works

Specifications: Cutting dia.: 17mm / 0.67"; shank size: 10mm / 0.39"; cutting depth: 28mm / 1.1"; overall length: 91mm / 3.58"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters

General Purpose: Can provide fast and precise cuts into 0.5mm-3mm stainless steel sheet, 5mm cast iron plate and other metals. Suitable for round or square pipes, equipment cabinet

All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works

Drilling Diameter: 22mm / 0.87-inch; Total Length: 83mm / 3.27-inch.

Material: Diamond coating maximizes performance and retains a sharper cutting edge.

Application: Suitable tool for cutting accurate holes in some materials such as stone and concrete.

2-13/16 Inch (71mm) Bi-Metal Hole Saw. Easy to use

Bi-Metal Construction - for toughness and long life

Sharper Tooth - cut holes in aluminum, copper, iron, and zinc drywall, wood

Product Name : Hole Saw;Material : Metal, Diamond Coated

Cutting Diameter : 26mm/ 1";Shank Size : 7 x 17mm / 0.28" x 0.7" (D * L)

Total Length : 50mm / 2";Color : Silver Tone

Size - Drilling Diameter: 1100mm / 4", Drilling Depth: 35mm / 1.38", Center Drill Dia: 6mm / 0.24", Shank Size: 6 x 22mm / 0.24" x 0.87" (D*L), each hole saw comes with a hex wrench and is packed in a plastic case.

Fast Cutting Tool - Special angle three-layer cutting edge design can drill fast and smooth, providing efficient cutting performance on a variety of materials including stainless steel, mild steel, iron, copper, aluminum, FRP, plastic and thin brass sheets.

Accurate Positioning - The center drill bit and spring-loaded guide ensure precision and control, can prevent carbide tip breaking if drilling directly on steel board.

Size - 38mm Drilling Diameter, 10mm Shank(1pcs); 75mm Drilling Diameter, 10mm Shank(1pcs)

Diamond Coated - Diamond coating enhances the drilling speed, which makes the bit sharper.

Nickel Plated Surface - The nickel plating surface can extend the service life and enhance surface corrosion resistance.