Best Acdelco Housings in 2026

Protects your HERO8 Black from mud, dirt and debris during extreme activities

Waterproof down to 196ft (60m)—perfect for deep-water diving

Includes a skeleton backdoor for improved audio capture and easy access to the camera’s touch screen

integrated housing thermostat; 187 degree

opens against the flow of coolant from the water pump

the coolant, under water pump pressure, is used to help the reverse poppet thermostat stay closed when cool to reduce leakage

Top Rated 4 Inch Remodel Can Recessed Light Housing

✅ AIR TIGHT & IC RATED - Sunco's remodel cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.

✅ SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire remodel cans with junction box are secured by inserting the can into the existing opening in the ceiling and pushing metal remodeling clips into the ceiling drywall or plaster to hold the can in place. TP24 connector included.

Ultimate protection for your HERO7 Black or HERO6 Black or HERO5 Black during extreme outdoor activities and deep-water diving

Waterproof to 196ft (60m)

Includes two Waterproof Backdoors which can be used with Floaty

EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install

HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation.Tips: Customer should verify that fixture is wired properly and verify that the line voltage at the fixture is correct

EXTREMELY BRIGHT DIMMABLE LEDs use 13 watts to provide 1,020 lumens with an 80 CRI, close to 80 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmers

Repairs leaking thermostat housings

Corrects engine overheating caused by a failed thermostat

GM recommended replacement part for your GM vehicle’s original factory component

Can withstand pressure to a water depth of 147 feet (45 meters)

All Camera controls can be easily accessed

Compatible with step up Ring psur 03 (260606), underwater macro conversion lens ptmc 01 (200975) and underwater wide conversion lens ptwc 01 (200973) sold separately

Made in the USA bolts

Heavy duty, high strength, grade 10.9 bolts

Zinc coated for long lasting corrosion protection and prevents threads from seizing

Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models

Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking

Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer

Vehicle Fitment Imformation: 2002-2010 Ford Explorer Upper & Lower V6 4.0L, 2002-2003 Ford Explorer Sport Upper & Lower V6 4.0L, 2007-2010 Ford Explorer Sport Trac Upper & Lower V6 4.0L, 2002-2010 Mercury Mountaineer Upper & Lower V6 4.0L.

OE part number: 2L2Z8592AA, 2L2Z8592BA, 2L2Z8592BB, 6L2Z8592FA (NOTE: REUSE OLD CAP FOR SECOND TEMP SENSOR SLOT. ) Can Be Used On Models With 1 Or 2 Coolant Temp Sensors.

3 Year Warranty. Thermostat Housing Assembly included Sensor, Gasket, O-ring, Thermostat, Connector Housing, Thermostat Housing.

【LIFE-TIME Warranty】 30-Day money back guarantee, LIFE-TIME Warranty and friendly 7 x 24 hours customer service.

【45M/147FT Waterproof】This waterproof housing case with upgraded waterproof sealing ring and tight buckle that help avoid water leakage effectively. You can use your GoPro to record underwater activity deep to 45 meters/147ft without worrying about leaks, and it also won't damage the shooting effect, clear and vivid.

【DESIGNED FOR】GoPro Hero 8 Black

Easy-to-spot flotation attaches directly to the housing backdoor

Great for snorkeling, surfing, wakeboarding or other deep-water activity

Includes two adhesive anchors and camera tethers for added security in extreme conditions

Top Rated 6 Inch Remodel Can Recessed Light Housing

AIR TIGHT & IC RATED - Sunco's remodel cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.

SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire remodel cans with junction box are secured by inserting the can into the existing opening in the ceiling and pushing metal remodeling clips into the ceiling drywall or plaster to hold the can in place. TP24 connector included.

Includes 1/4 inch x 5 inch stud

Includes wing-nut

S-stud

Waterproof depth: Use this waterproof housing you can take your gopro hero 4/hero3+/hero3 camera, Waterproof to 147 feet (45 meter). for deep sea diving and extreme activities.

Compatible with Gopro HERO4/HERO3+/HERO3, When you insert your camera, you can also easily operate the shutter/power button or select key/ Mode button. The waterproof housing Size: 7.0cm(L)x4.3cm(W)x7.5cm(H) include Thumbscrew and Quick release buckle mount size.

EXTRA PROTECTION: The housing does not only offer greater waterproof protection to your GoPro hero4/hero3+/hero3 camera, it also offers extra protection against dust, scratches and shocks.

HIGH-QUALITY FAN AND LIGHT COMBO: High-efficiency centrifugal fan with a 1.5 Sones rating at 70 CFM and a 4" round duct connector

MODERN: Trim matched to designs of major recessed light manufacturers

PRACTICAL: 6.87" high housing appropriate for new construction and 2" x 8" ceiling joists

Slim, lightweight design makes your GoPro more wearable and mountable than ever

Waterproof up to 131 feet; To provide reliable protection against moisture damage.

Flat glass lens delivers maximum image sharpness above and below water

NO MORE FOG - Using our anti-fog inserts will help prevent excess moisture forming on your lens and inside the underwater housing. When filming in cold or humid environments fog inside the housing from the heat of the camera

REUSABLE - These inserts can be used multiple times before they need to be thrown away. When you want to remove moisture form the inserts you can simply bake the inserts in the oven at 300F for 5 minutes. Be sure to let the inserts cool before handling or placing them into the camera housing

HIGH QUALITY ABSORPTIVE MATERIAL - Made with high quality moisture absorbing silica gel on strong cellulose fiber

HD Scratch Proof Lens & Clear Shooting Under Water: This waterproof housing case is equipped with tempered glass lens to protect your Gopro lens, HD lens with high transmittance record activities even 147FT/45M under water and it won't damage the shooting effect, clear and vivid

Big Button Size: Easily operate the shutter/ Power button or select key/ Mode button under water with external button. Keep your hand more comfortable

Specially Designed For Gopro Hero 4 Hero 3+: Ideal for diving, surfing, snorkeling, skiing, drifting, skydiving and other sports activities. Well protect your gopro action camera for extreme sport

Compatible with GoPro Hero4 Hero3+ HD cameras standard/waterproof/skeleton housing.

Upgrated aluminum latch, easier to install and remove.

Updated screw design, tighter and more sturdy, allows the rear door to shut tight.

Soften Glare Light: The white metal step baffle reflects the lighting from the bulb and makes the illumination softer and well-balanced without glare or flickering, reducing the irritation to your eyes

Standard in Size: This can light trim is designed for recessed cans with an inner diameter of 5.9-6.3 inches and a height of 6-7.25 inches and ceiling lighting fixtures with E26 sockets, this baffle trim fits for Halo/Juno remodel recessed housings. Suitable for both IC rated and non IC rated housings

High Compatibility: Works with the most common bulbs in your daily life, such as PAR30, PAR38, A19, BR30, BR40 and same size halogen, incandescent and LED light bulbs. Also could reduce the costs of maintenance or replacing light fixtures

Repairs leaking thermostat housings

Corrects engine overheating caused by failed thermostat

GM-recommended replacement part for your GM vehicle’s original factory component

Top Rated 4 Inch Remodel Can Recessed Light Housing

AIR TIGHT & IC RATED - Sunco's remodel cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.

SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire remodel cans with junction box are secured by inserting the can into the existing opening in the ceiling and pushing metal remodeling clips into the ceiling drywall or plaster to hold the can in place. TP24 connector included.

Top Rated 4 Inch New Construction Can Recessed Light Housing

AIR TIGHT & IC RATED - Sunco's new construction cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.

SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire new construction cans with junction box are installed to the framing with adjustable bar hangers prior to drywall installation. TP24 connector included.

Direct replacement - this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles

Ideal solution - this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Optimal sealing surface and design

Less expensive

Filter change out differential: 10-Inch -15-Inch H2O above initial delta P

【Compatible with Gopro Hero 9/10/11】: Perfect for GoPro Hero 9/Hero 10/ Hero 11, When you insert your camera, you can also easily operate the power button or mode button. It fits perfectly and seals tightly, provides ultimate protection for your action camera during deep-water diving and extreme outdoor activities like surfing, diving, snorkeling, skiing, drifting, skydiving cycling, etc.

【60m/196ft Waterproof】: Our waterproof housing case for Hero 9/Hero 10/Hero 11 has a upgraded waterproof sealing ring and a tight buckle helps avoid water leakage or fogging effectively. You can even record underwater activity deep to 60 meters/196ft without worrying about leaks

【Scratch Proof Lens】:The main body of this underwater dive case is made of high-quality PMMA plastic. The whole structure is sturdy enough to protect your camera lens and LCD display screen against high impact drops, dents and scratches.

COMPATIBLE WITH PENTAIR PENTEK 10" BIG BLUE HOUSING SUMPS and most other 10" heavy duty housings

EASILY REMOVES FILTER HOUSINGS for quickly changing water filter cartridges

HELPS LOOSEN STUCK OR JAMMED FILTER HOUSINGS

It integrates design elements of both a thermostat and a water outlet

This allows for a simplified design since parts of the water outlet function as the thermostat flange

This also aids in installation because the orientation of the thermostat is fixed in place as the water outlet is bolted to the engine block

Replacement housing Compatible with GoPro HD Hero and Hero 2 cameras.

Up to 98 ft/ 30 m Waterproof ,A Must have for diving, swimming, snorkeling and other underwater activities.

Made of high quality polycarbonate, safely protects your camera underwater.