Best Acdelco Housings in 2026

NO MORE FOG - Using our anti-fog inserts will help prevent excess moisture forming on your lens and inside the underwater housing. When filming in cold or humid environments fog inside the housing from the heat of the camera

REUSABLE - These inserts can be used multiple times before they need to be thrown away. When you want to remove moisture form the inserts you can simply bake the inserts in the oven at 300F for 5 minutes. Be sure to let the inserts cool before handling or placing them into the camera housing

HIGH QUALITY ABSORPTIVE MATERIAL - Made with high quality moisture absorbing silica gel on strong cellulose fiber

Rugged Housing Provides Full Access To Virtually all Camera Key Controls And Features

Sealed Gasket Design For Added Protection From Water And The Elements

Depth Tested to 30' (10m) for WX150, WX300, WX200, WX350, WX80, WX70, WX50, WX30, WX10, WX9, WX5, W800, W810, W830, W710, W730, W690, W650, W620, W610, W570, W560, W550, W530, W510, W380, W350, W330, W320, W310, S2100, S2000

Rugged Housing Provides Full Access To Virtually all Camera Key Controls And Features.Dimensions -5 x 3.5 x 2.5" (12.7 x 8.89 x 6.35 cm)

Sealed Gasket Design For Added Protection From Water And The Elements

Depth Tested to 30' (10m)

Come with a Standard Underwater Housing for SonyA7S III and also a 6" Dry dome port

Built leak detection sensor, and Vacuum Pump System port Design

Stainless steel mounting plate 1/4" Thread

High Impact, Clear Polycarbonate Case

Photo Quality Viewing Glass

Useable upto 40 Meters (130')

Ready for adventure: From extreme aerial sports to underwater depths of up to 196.85 ft., the dustproof, shockproof, and waterproof MPK-UWH1 2 is designed to protect your Action Cam.

High image quality shooting: Capture sharp and clear images underwater right out to the corners of the frame with the specially designed flat lens.

Full Control: All Action Cam controls are available even when inside the housing. Easy to use buttons offer unlimited control in any environment.

Dive door for 4K Action Cam underwater housing

Take Your Action Cam Diving

To Be Announced

Excellent water resistance at a depth level of 40 m / 130 ft.

Rotary lens-ring dial, large lever shutter button, zoom lever

Allows use of camera's built-in flash

Special Design for Sony ILCE-7R IV Alpha 7R IV Camera to make sure all control button available when using underwater, Come with houisng ( Mounted with Standard Flat Port), also a Seafrogs wa005-F dome port

The waterproof cases are not only for diving, with these housings, you no longer have to worry about your camera if it is raining, snowy or dusty

VACUUM PUMP SYSTEM PORT: Compatible with Seafrogs VPS-100 vacuum pump system, for checking the water tightness of underwater camera housing before submerging

COMPATIBLE: This Underwater housing is specially designed for Sony a6300. Easily operate all Camera controls underwater with external buttons

Compatible lenses, for Sony E 16-50mm F3.5-5.6 PZ OSS, compatible with Sigma 19mm F2.8 DN Art , Sigma 19mm F2.8 DN Art

Red Fliter can restore the warm color absorbed by blue water and you can make nice colorful pictures and videos

Applicable model: professional designed for Sony A6000 (filter diameter: 16-50mm)

Widely applications: Ideal for shooting water-activities photos, like shooting during surfing, snorkeling or diving under water 40 meters, It can also be used under rainy, snowy, windy, dust or muddy circumstance.

Easy and safe to use: Each housing is tested individually to prevent any accidents. Just insert your digital camera in Sea Frogs diving case and you will be able to take beautiful pictures at depth up to 40 meters/130 feet.

Rugged housing provides full access to virtually all cameras key controls and features.

Sealed gasket design for added protection from water and elements

Depth tested to 30 feet.

Applicable model: professional designed for Sony A6400

Widely applications: Ideal for shooting water-activities photos, like shooting during surfing, snorkeling or diving under water 40 meters,it can also be used under rainy, snowy, windy, dust or muddy circumstance.

Easy and safe to use: Each housing is tested individually to prevent any accidents. Just insert your digital camera in Sea Frogs diving case and you will be able to take beautiful pictures at depth up to 40 meters/130 ft.

The Default setting is for Sony A6300/A6500, so some accessories need to be replaced to make the A6000 full function ( Parts in Packing) Please Check the manual Page 06 to do the Parts Installation( or the install video on our product page video), if your camera is A6000

Special Design for Sony a6300/6500, compatible with Sony a6000 Camera to make sure all control button available when using underwater

Comes with Red Filter to help to Reduce Red light underwater

IMPORTANT: Has been Tested with Sony A7II, A7RII, and A7S II, These cameras have the same size and button positions, but not fit A7 first generation, sorry that factory didn't update the Manual

Housing Suit for Sony A7ii A7Rii A7Sii With 28-70mm/ 50mm F1.8/ 16-35mm F4/ 55mm F1.8 Lens

Comes with original len mount and also a wide angle Dome Port, allows you take half above half underwater picture easily

Rugged Housing Provides Full Access To Virtually all Camera Key Controls And Features

Sealed Gasket Design For Added Protection From Water And The Elements

Depth Tested to 30' (10m)

Vacuum Pump System port

Inbuilt leak detection sensor, and  Reinforced metallic bottom plate

Stainless steel mounting plate 1/4" Thread

Come with Waterproof case for Sony A6500 A6300 A6000, a Fisheye Wide Angle Lens Dome Port and also a Full Color Red Filter

IMPORTANT: 1. SWITCH VIEWFINDER TO LCD/MONITOR ONLY! 2. The Default setting is for Sony A6300/A6500, so some accessories need to be replaced to make the A6000 full function ( Parts in Packing) Please Check the manual Page 06 to do the Parts Installation( or the installation video on our product page video), if your camera is A6000

With Wide Angle Dome Port, applied to take half above water half underwater video or image very easily, and your angle will much larger than the normal lens

Come with Housing Case (Already mounted with lens Tube) and also an 8" Dome Port, and Compatible for Sony A7 III A7R III

Seafrogs 8" Dry Dome Port allows bugger lens such as 16-35mm F2.8 GM Lens, 24-70mm f/4 ZA OSS Lens

1/4"tripod screw on the bottom allows more extention ability

Depth Rating: 200' - Mechanical Controls - Made in the USA

Access to All Important Camera Functions

Clear Polycarbonate Construction

COMPATIBLE: This Underwater housing is specially designed for Sony A7R III, and compatible with Sony A7 iii. Easily operate all Camera controls underwater with an external button

【Top cause of flooding】- Closing the housing and having a desiccant pack or a large hair, or Sand caught in the o-ring. This has happened to many customers- beware - always watch carefully when you close the housing. Nothing can be touched or laying on the o-ring as the housing close, It is highly recommended to get the SeaFrogs Vacuum Pump VPS-100 Pre-Dive Vacuum Leak Check System

VACUUM PUMP SYSTEM PORT: Compatible with Seafrogs VPS-100 vacuum pump system, for checking the water tightness of underwater camera housing before submerging

· 【 Compatibility 】 This underwater photography housing fits for Sony A6000/ A6300/ A6500. It is best gift for outdoor enthusiast.

· 【 Diving and Anti-Pressure 】 The Sea Frogs diving case is up to 40 Meters (132feet) waterproof depth. IPX8 Certified Waterproof level. Before you dive into the water, please make a trial use on this item to make sure you know all the functions and the waterproof test.

· 【 Clear and Non Reflective Underwater Photography 】 Anti-reflection glass designed for back and front camera cam take high quality pictures. It has very clear pictures without reflection and easily control on underwater.

IMPORTANT: Has been Tested with Sony A7II, A7RII, and A7S II, These cameras have the same size and button positions, but not fit A7 first generation, sorry that factory didn't update the Manual

Housing Suit for Sony A7ii A7Rii A7Sii With 28-70mm/ 50mm F1.8/ 16-35mm F4/ 55mm F1.8 Lens

Comes with original len mount and also a wide angle Dome Port, allows you take half above half underwater picture easily

Come with a Standard Underwater Housing for Sony A1 and also a 6" Dry dome port

Built leak detection sensor, and Vacuum Pump System port Design

Stainless steel mounting plate 1/4" Thread

This sophisticated housing provides everything you need to get creative with this powerful compact camera! We recommend this system for its excellent low-light capabilities and super-sharp, 24-70mm Zeiss lens. The Sony Cyber-shot RX100 Mark IV differs from the III slightly in camera thickness.

Applications: This Seafrogs ST-100 Pro underwater strobe is perfect for filling light for underwater photography. With optical fiber cable, it's suitable for various waterproof case, such as Sony, Canon, Fujifilm, Nikon, Panasonic, etc.

Waterproof 100M/328FT: This underwater Flash light can withstand the pressure of underwater 100m, but please do not expose to rapids, waterfalls, water flowing at full force from a tap, etc.

TTL file (camera - AUTO gear postion): 1. test flash and the camera flash synchronize automatically 2. test level compensation tuning knob (EV)(-2.0~+2.0)a tatal of 6 file 3. test turn off focus light automatically when pressing the shutter.

Compatible with Sony A7 III A7R III; Notice: The housing is already mounted with Standard Flat Port and the 6" Long Dome Port in another Box)

Packing come with two Zoom Gear, one for for Sony 28-70mm F3.5-5.6 lens( used with Standard Port ), the other for Sony 24-70mm F2.8 GM(Used with WA005-A 6 inch Dome Port)

Vacuum Pump System port : work with Seafrogs VPS-100 Pre-Dive vacuum leak check system

· 【 Compatibility 】 This underwater photography housing fits for Sony A7RIV 90MM. It is best gift for outdoor enthusiast.

· 【 Diving and Anti-Pressure 】 The Sea Frogs diving case is up to 40 Meters (132feet) waterproof depth. IPX8 Certified Waterproof level. Before you dive into the water, please make a trial use on this item to make sure you know all the functions and the waterproof test.

· 【 Clear and Non Reflective Underwater Photography 】 Anti-reflection glass designed for back and front camera cam take high quality pictures. It has very clear pictures without reflection and easily control on underwater.

Digitale Unterstützung: optisches Kabel (kompatibel mit allen Kameras); Batterie: 18650 und Akku

Blitzunterstützung: 5-Steckdose und optischer Kabelanschluss Blitzpunkt: 100 x 100 Grad

Farbe emperatur:5000-6000K FokussierungLicht: 6W LED, manual/auto(auto 1.5s close), auto close when wxposure

COMPATIBLE: This Underwater housing is specially designed for A7S III. Easily operate all Camera controls underwater with an external button

The waterproof cases are not only for diving, with these housings, you no longer have to worry about your camera if it is raining, snowy or dusty

VACUUM PUMP SYSTEM PORT: Cmpatible with Seafrogs VPS-100 vacuum pump system, for checking the water tightness of underwater camera housing before submerging