Best Industrial Electrical in 2026

Fully user programmable with millions of possible combinations - 37 unique light sequence modes already included

Solid state switching for silent operation (no clicking mechanical relays) and circuitry to protect from kickback and voltage spikes

Compatible with all traffic lights & bulbs (non-dimmable LED bulbs included).

Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit

1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED

Everything comes in a compact case and very handy

30pcs 16 Pin header socket connector strip with 0.1" pitch .

Female socket, single row, straight pin, Through Hole mounting.

Ideal electronic component, is easy to install.

Type: 2.54mm 40 Pins Single Row Straight Round Female Socket Pin Header Strip

Specification: Type: Female Header; Pitch: 2.54mm; Number of Pins: 40 Pin; Row Type: Single; Connector Type: Straight

Color: Black

Model: SSR-40DA, single phase Solid State Relay 60A DC to AC control, CE Compliant to EN60950-1

Input voltage 3-32V DC, Load voltage 24-380V AC, Max load current 40 Amp

Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.

Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.

Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.

Huge SMD 0805 Components Assortment, 2900 pcs:

1600 pcs Resistor, 560 pcs Capacitor, 180 pcs Transistor, 260 pcs Diodes, 160 pcs Zener, 9 pcs OpAmp, 16 pcs IC, 75 pcs LED

13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB

Can be used for 3-5V DC power supply modules. It has red power indicator.

IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on

The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay

<b>Price For:</b> Each <b>Net Weight</b>: 12 oz. <b>Lubricant NSF Rating</b>: Not Rated <b>Min. Operating Temp.</b>: 0 Degrees F <b>Item</b>: Mold Release <b>Container Size</b>: 12 oz.. <b>Max. Operating Temp.</b>: 120 Degrees F <b>VOC Content</b>: 40 - 60% <b>Application</b>: Molding, Industrial <b>Physical Form</b>: Aerosol <b>Country of Origin (subject to change)</b>: United States

Main chip: N5555;Input voltage: DC5-15V; Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input); Output frequency 1Hz-50Hz, 50Hz-1KHz, 1KHz-10KHz, 10KHz-200KHz Four Optional.

There are 4 jumpers and 2 variable resistors on the module, users can adjust the output wave with these components, to get their ideal wave easily.

Output LED indicator,: low-level LED light, high-level LED off, the frequency is low when the LED flashes.

Material: The Bullet connector is made of high-quality Brass with a tinned surface, which has the characteristics of rust prevention, high-temperature resistance, and corrosion prevention.Insulation cover is transparent, allowing a clear view.

Super srong crimps: These bullet crimp connectors make strong crimps, your wire will not slip out.

Convenient and easy to install: You Just Need to Connect the Male and Female Terminals at Both Ends, Then the Male and Female Terminals Docked to Complete the Wiring Easily, And the Male and Female Terminals can be Disconnected When Not Needed.

Perfect for use with breadboard and perfboard projects

Easy to switch

Work great as on/off switches or selector switches

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.

Do not touch the product with water, as this may cause abnormal output waveforms.

Material: Plastic, Metal; Main Color: Blue, Silver Tone.

Type: Encoder code with Switch; Adjustment method: 360 Degree Rotary; Number of digits: 20 digits; Pins: 5.

Shaft Diameter: 6mm/0.24inch; Shaft Length: 20mm/0.79inch.

In the forward rotation, the A line phase leads the B line phase; when reversed, the B line phase leads the A line phase. The phase relationship and number of rotations of AB can be identified using a simple digital logic circuit (exclusive OR gate and D flip-flop).

IDC-40 Interface Module with Simple DIN Rail Mounting feet.

IDC pin pitch 2.54mm/0.1" male header connector.

Pitch 3.81mm/0.15" screw terminal block.

IDC-20 Interface Module with Simple DIN Rail Mounting feet.

IDC pin pitch 2.54mm/0.1" male header connector.

Pitch 3.81mm/0.15" screw terminal block.

Type of Row: Double-Row

Gender of Connector:Female

Number of Pins: 2X4 Pin

IDC-16 Interface Module with Simple DIN Rail Mounting feet.

IDC pin pitch 2.54mm/0.1" male header connector.

Pitch 3.81mm/0.15" screw terminal block.

Genuine OEM Generac Part

Fits Specific Generac 0059911 & 0059932 Models

Please Note: Does not fit all specs of above models listed, please make sure this fits by model, type and serial number of your engine

MAX7219 is an integrated serial input / output common-cathode display driver, which connects your microprocessor to a 7-segment digital LED display with 8 digits; MAX7219 digital display control module, you can use it for Ar-duino.

The module is compatible of 5V / 3.3V microcontroller; Only three IO ports are used to drive the eight digit display.

Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays; PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Feature-rich】Support external braking resistor and potentiometer, Support external braking resistor .supports mcah3 function and RS-485 communication

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

Box is black ABS plastic, secured with self tapping screws (included). 2 sets of removable end panels.

Box Size 2.6 x 2.6 x 1.1 in. (66 x 66 x 28 mm)

Single-sided high-quality FR4 glass-epoxy circuit board, 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.

3601G90260 Bosch

3165140728089

Stainless Steel construction

Air Consumption: 25 SCFM @ 80PSIG

1/4" NPT

A prototyping add-on for all Feather boards

Connect a FeatherWing on top or bottom with Feather Stacking Headers

Duplicate breakout for each pin on a Feather, as well as a bunch of plain grid proto holes

10PCS/LOT air conditioning water heater 12V relay MPY-S-112-A MPYS112A 12VDC 12V DC12V 25A 250VAC 4pin

Input voltage AC 125/250V 50/60Hz. Maximum total input current 40A(one position terminal block maximum current 20A).

Maximum output current 10A(one channel). Maximum total output current 40A.

10Amp rocker switch thermal circuit breaker overload protectors, you can manually set the switch output state RESET or OFF. The switch has a built-in red indicator light, when the output normal indicator is on, the output disconnect indicator is off.

Create Custom 110V/220V Ac light show for HALLOWEEN surprise your friends.

8CH AC Light Dimmer Module Controller Board ARDUINO RASPBERRY Compatible 50/60Hz

Compatible with any ARDUINO, RASPBERRY boards.Connected LOAD current for each channel 2A long-term and 5A short-term.

OEM Replacement Component

35/4 x 440 VAC - Genuine OEM Capacitor

Commonly Found in Various American Standard / Trane Systems

4CH AC Light Dimmer Module Controller Board compatible with ARDUINO, RASPBERRY 50/60Hz

AC Phase Control Circuit (Dimming Circuit) / Home Automation, School Projects, Work Related Projects

Auto detect 50Hz or 60Hz. / Working voltage from *80V to 240v.