Best Tera Pump Industrial Pumps in 2026

AUTOMATIC UTILITY PUMP: For submersible use only; this pump is equipped with an 18--foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter

SUBMERSIBLE PUMP: Typical applications for the 5-ASP-LL pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only

BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection; removable screen protects the impeller and motor

MANUAL UTILITY PUMP: For submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter

SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only

BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection; removable screen protects the impeller and motor

MANUAL UTILITY PUMP: For submersible use only; this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter

SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only

BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection; removable screen protects the impeller and motor

Product 1: MANUAL HYDROPONICS PUMP: For submersible use only; this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter

Product 1: SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only

Product 1: BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection; removable screen protects the impeller and motor

APPLICATIONS: statuary fountains, water displays, air conditioners, machine tool coolants, water transfer and recirculation for home, industrial or commercial use

VERSATILE: This pump can be placed in any position as long as the liquid is above the volute intake; volute on this pump can be roated 90 degrees

CONSTRUCTION: epoxy encapsulated motor; glass-filled polyester cover; volute and impeller made of polypropylene; triple lip Nitrile shaft seal; polypropylene screen

MANUAL HYDROPONICS PUMP: For submersible use only; this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter

SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only

BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection; removable screen protects the impeller and motor

APPLICATIONS: for commercial, industrial and home applications including statuary fountains, water displays, air conditions, machine tool coolants, hydroponics and other water transfer applications

BUILT TO LAST: with features such as epoxy coated die-cast aluminum housing; oil-filled motor housing; impedenace protected, and screened inlet which prevent debris from damaging the impeller

SMALL SUBMERSIBLE PUMP: for submersible use only; equipped with 1/4-inch MNPT discharge; 3.6 inches long x 4.09 inches wide x 4.25 inches high

LARGE TANK CONDENSATE PUMP: Little Giant VCL-24ULS (553201) 1/18HP Condensate removal pump features safety switch, 1-gallon ABS plastic tank and 6-ft. power cord

PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow

CONSTRUCTION: ABS pump housing, switch housing and tank; galvanized steel tank cover; stainless steel motor shaft; polypropylene impeller; acetal discharge adapter

APPLICATIONS: designed for commercial, industrial and home use including fountains, water displays, air conditioners, machine tool coolants, and other water transfer/recirculation applications

CORROSION-RESISTANT CONSTRUCTION: glass-filled nylong housing, cover, screen, volute and impeller; nitrile shaft seal

SCREENED INTAKE: filters out debris which protects the impeller from damage

DUAL PURPOSE PUMP: the 3E-34N can be used in-line or as a submersible pump for use in the home, in workshops, or in commercial/industrial fields

SUBMERSIBLE PUMP: It Is ideal for applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.

IN-LINE PUMP: This pump features 3/4-inch MNPT intake and 1/2-inch MNPT discharge

BUILT TO LAST: This automatic heavy duty 115 Volt cast iron pump is ideal for use in residential sewage and septic systems

AUTOMATIC OPERATION: Piggy-back float switch; activates when water reaches 16 to 19 inches , shuts off when water drops to 9 and 11 inches; converts to manual mode easily for maintenance

CLOG-RESISTANT DESIGN: capable of passing 2-inch diameter semi-solids

BUILT TO LAST: Epoxy coated die-cast aluminum housing and motor cover offers rust-resistant protection

REMOVABLE SCREEN: polypropylene intake screen prevents debris from damaging the impeller

DUAL PURPOSE PUMP: can be used totally submersed or in-line (fed with a pipe or hose)

APPLICATIONS: designed for commercial/industrial/residential use where liquid must be transfered or recirculated; such as water displays, ice makers, air conditioners, boat bailing, fuel oil transfer

MILD CHEMICAL RESISTANCE: can be used for soap solutions, acid plating solutions, and fertilizers

BUILT TO LAST: Epoxy-coated die-cast aluminum housing, polypropylene volute and elbow, Nitrile shaft seal; impedance protected motor; CSA listed in the USA and Canada

APPLICATIONS: For home, commercial or industrial use pumping moderately corrosive liquids including acids, alkalis, solvents, brines, plating/sterile solutions compatible with the pump's materials

BUILT FOR CHEMICAL COMPATIBILITY: glass-filled polypropylene volute, housing and impeller; ceramic shaft and thrust washers; Nitrile O-ring

LIMITATIONS: Specific gravity to 1.1, fluid temperature to 150°F, ambient air temperature to 77°F

APPLICATIONS: for commercial, industrial and home use in statuary fountains, small ponds, water displays, air conditioners, machine tool coolants and other water transfer or recirculation applications

BUILT TO LAST: Oil-less epoxy encapsulated motor, thermal overload protection, glass-filled polyester housing and cover, nylon volute and impeller and Viton shaft seal

HOODED VOLUTE DESIGN: keeps pump primed even in shallow water; screened intake protects the impeller from damage

APPLICATIONS: designed for in-line, non-submersible use to circulate highly corrosive acides, alkalis, solvents, brine, plating and sterile solutions and other highly corrosive chemicals/solutions

EXCELLENT CHEMICAL RESISTANCE: motor housing, impeller and volute are made of polyphenylene sulfide (PPS); motor shaft and thrust washers are ceramic, FKM O-ring seal

RUN-DRY CAPABLE: for up to 8 hours

APPLICATIONS: for commercial, industrial and home use in statuary fountains, small ponds, water displays, air conditioners, machine tool coolants and other water transfer or recirculation applications

BUILT TO LAST: Oil-less epoxy encapsulated motor, thermal overload protection, glass-filled polyester housing and cover, nylon volute and impeller and Viton shaft seal;

HOODED VOLUTE DESIGN: keeps pump primed even in shallow water; screened intake protects the impeller from damage

APPLICATIONS: this small, oil-filled pump can be used submersed or inline for a variety of water transfer/recirculation purposes around the home, in workshops or in commercial/industrial applications

VERSATILE: For commercial, industrial or home applications including statuary fountains, water displays, air conditioners, machine tool coolants, recirculation, water transfer

BUILT TO LAST: Epoxy coated die-cast aluminum housing and motor cover; nylon volute and impeller; triple-lip Nitril shaft seal; polypropylene screen

PORTABLE UTILITY PUMP: 115 Volt stainless steel pump is ideal for water transfer or removal in and around the home; this pump is a non-submersible pump with a 6-ft. cord

DUAL THREADED INTAKE AND DISCHARGE: 3/4-inch male garden hose threading and 3/8-inch FNPT threading for use with 3/4-inch standard garden hose or 3/8-inch male threaded pipes

REPAIR KIT INCLUDED: includes two extra impellers and replacement gasket; installation instructions included in owner's manual

APPLICATIONS: converts manual pumps up to 1/2 HP to automatic operation; ideal for pond or fountain pumps

EASY INSTALLATION: equipped with a piggyback plug for easy installation; just plug the pump's plug into the back of the switch plug

COMPACT DESIGN: ideal for confined spaces

APPLICATIONS: converts manual pumps up to 1/2 HP to automatic operation; ideal for sump or pond pumps

EASY INSTALLATION: equipped with a piggyback plug for easy installation; just plug the pump's plug into the back of the switch plug

COMPACT DESIGN: ideal for confined spaces

Product 1: AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches

Product 1: BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal

Product 1: CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada