Best Mxuteuk Industrial Switches in 2026

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ16mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ19mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Passive Infrared (PIR) sensor detects motion with 180° field of view to automatically turn lights ON/OFF based on the occupancy or vacancy in a room

Features CDS technology, an automatic ambient light level sensing technology that remembers your ON/OFF behaviors to turn your lights ON at your preferred light level

Universal wiring design featuring interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where

Battery Disconnect Switch: Marine Battery Switch Easy To Install 12V 24V 48V Battery Switch with On/Off position in clear color labels. Switch OFF = No power (red) to the cut-off circuit, Switch ON=Power (green) to closed circuit. Rating: 275 A continuous at DC 12V, 455 A Intermittent at DC 12V, 1250 A momentary at DC 12V..

WaterProof: Battery Disconnect Switch Marine Battery Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion and rain.

Comprehensive Safety: When Camper RV boat Truck Travel Trailer not in use, disconnecting the power will prevent the battery from draining. If the battery is not disconnected, it will continue to drain until the battery is depleted. When you come back to drive the car for a few months or even six months, the car will no longer be able to fire up. When the vehicle breaks down for maintenance, you can disconnect the current without having to remove the battery clamps.

Latching Type: Push it, ON; Push it again, OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

IP67 Waterproof & IK10 Protection: Rustproof, can be used in wet or dusty environment

There is color difference, please purchase with caution. Momentary push button switch, press the button the contacts - on, when you release the button the contacts - off.

Switch Rating: 2A/36V DC/AC; Switch Combination: 1NO. Dimensions: 21.5 * 30mm/0.85 * 1.18inch(Max. D*H); Mounting Hole Diameter: 19mm/0.75inch.

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36DC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

MAIN SPECIFICATIONS AND TECHNICAL DATA - Shopcorp Selector Switch offers a two (2) position self-lock switch with a 22mm mounting hole and a maintained (latching) operation type. This piece is robust and light weight (90.6g/0.20lb/3.2oz), made of plastic, metal and electronic components. It can also be connected as a normally open (NO) switch. No battery required. Our buttons conform to the GB/T14048.5 standard.

WORKING CONDITION - Operating voltage (Ui): 415V; Contact current: 10A; Protection grade: IP55; Certification: CE, CCC; Operating temperature: between -25°C and +70°C; Operating humidity: 50%; Vibration resistance: 15g, amplitude is about 1.0mm; Electrical durability/life: 50,000 times; Shock resistance: 200g; Operation Mode: on-none-off.

VERSATILITY - This is used in industrial controlling circuits of AC 50Hz or 60Hz, rated operational voltage of 415V and below, DC operational voltage of 220V and below, for controlling the electromagnetic starter, contactor, relay and other automatic electrical circuit controls. It can be used under harsh weather conditions because of the lock, fall and vibration resistance. Shopcorp Selector switches are widely used, including in many electrical appliances in the home.

A great way to clean up your bars on that custom build! Fits 1" Handlebars.

CNC machined from 6061 Billet Aluminum and coated in a durable Satin Black finish.

Two (2) Brushed Stainless Steel Momentary Switches. Perfect for internally wiring starters and horns.

MAIN SPECIFICATIONS AND TECHNICAL DATA - Shopcorp Selector Switch offers a three (3) position self-lock switch with an 22mm mounting hole and a maintained (latching) operation type. This piece is robust and lightweight. It can also be connected as a normally open (NO) switch or normally closed (NC) contact. It is made of plastic, metal and electronic components. No battery required. The buttons conform to the GB/T14048.5 standard.

WORKING CONDITION - Operating/Insulation voltage: 220VAC and 380V respectively; Contact current: 10A; Installation dimensions: Φ22mm; Protection grade: IP55; Certification: CE, CCC; Operating temperature: between -25°C and +70°C; Operating humidity: 50%; Vibration resistance: 15g, amplitude is about 1.0mm; Electrical durability/life: 50,000 times; Shock resistance: 200g. Switch type: Selector Rotary Switch; Mounting Type: Panel Mount. This selector switch must be fixed to use on the panel

VERSATILITY - This is used in industrial controlling circuits of AC 50Hz or 60Hz, rated operational voltage up to 380V and below, DC operational voltage of 220V and below for controlling the electromagnetic starter, contactor, relay and other automatic control electric circuits. It can be used under harsh weather conditions because of the lock, fall and vibration resistance. Shopcorp Selector switches are widely used, including in many electrical appliances in the home

Fits in standard wall box

Accepts back or side wiring, terminal clamps or ring terminals

Oversized toggle provides clear actuation feedback and long-lasting durability

20 amp, 125-250V, 1 HP foot switch for use with medium-duty electrical devices

Cast iron housing for strength durability

Non-skid base for stability and safety with two bolt holes for mounting to floor or equipment

Die cast metal and chrome plastic housing

Clamps on steering column

4 way hazard switch