Best Waterproof Selector Switches in 2026

Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads

Ignition protected—safe for installation aboard gasoline powered boats

IP66 waterproof, ISO 8846 and meets ABYC requirements

🔋【Material】: Heavy duty battery shut off switch made of ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm) & nuts for ignition protected to distinguish the different gears easily which you switch to even at night.

🔋【Easy Operation】: RV Battery switch with On/Off position in clear color labels. Switch ON=Power (green) to closed circuit, Switch OFF = No power (red) to the cut-off circuit.

🔋【Compatible 】: Used for 12-48V, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V, battery selector switch can stand alone or be locked together with other switch for minimizing battery loss and preventing electric leakage effectively.

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equipped with 4 sets of bolts.

Operation: On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.

Compatible: used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Its purpose is to eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.

✓ VERSATILE & CUSTOMIZABLE: Easily set up to 18 On/Off programs, each with 7-day programming options. Settings can be as short as one minute. Choose your own individual days or simply select one of our convenient pre-set combination days

✓ FULL CONTROL: Press and hold on the door to shift easily between AUTO (timed on/off) or MANUAL (manual on/off) modes. A backup battery keeps your settings even in the event of a power outage, and our convenient Daylight Savings Time mode makes time changes headache-free

✓ PROTECT YOUR HOME: Activate our timer’s “Random” vacation mode to randomize your home’s programmed lights. Make your home look “lived in” even when you’re away.

Product Name: Toggle switch; Country of Manufacture: CHINA;

Type: ON/OFF/ON ; Connector type: DPDT, 6 terminal pin ; Rated Voltage & Current : 16A 250V AC

Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 33x20x57mm/ 1.3" x 0.76" x2.2"(L*W*H)

Specification: Marine battery switch is in self-cleaning sliding contact design. Rated at 275 amps continuous, 455 amps intermittent, and 1250 amps cranking. Voltage: 12V-48V DC. Stud Size: 2x3/8'' (10mm)

Dual 1-2-Both-Off Battery Switch: With a battery shut off switch you can ON or OFF or both ON/OFF a group of loads irrespective of their individual ON/OFF switch control

Heavy Duty Boat Battery Switch: Made ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm). Marine battery kill switch Fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches

Product Name: Rocker Switch; Poles: DPST

Terminals: 6 Pins；Position: On-Off-On;Material: Plastic, Metal Waterproof ; Color: Red

Rated Voltage: 16A 250V AC 20A 125V AC;Special attention: Light only connect to 12V,Can light up ；Built in backlit red light (light lits when switch is in the on position).

【Great Compatibility】This dual Marine battery switch is Suitable For Two Batteries, It can stand alone, or be locked together with other switches to isolate and Can be used with 12V up to 60V DC systems to isolate and secure the electrical system,Offering a simple economic way of separating two batteries.

【Heavy Duty】Battery shut off switch comes with 1-2-both-off 4 positions,200 A continuous at DC 12V, 455 A Intermittent at DC 12V, 1250 A momentary at DC 12V,3 mounting screw holes(8mm diameter)for 8-10MM screw connection (not included mounting hardware)

【Easy to install】Refer to wiring diagram for installation,ABS plastic housing, making it ideal for marine applications,rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts.

【DURABLE MATERIAL】Battery isolator switch has modern and fashion appearance,Which is made of high quality ABS + metal,making it ideal for marine applications, removable rear cover insulates the rear terminals against any short circuits.

【HEAVY DUTY RATED】BATTERY MASTER SWITCH,Heavy duty rated 300 Amps intermittent, 2-Position: ON and OFF, 200 Amps continuous at max.32V DC, to isolate and secure the electrical system.

【GREAT Function】Marine Boat battery disconnect switch can disconnect the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use. Compact size, sleek modern appearance, sturdy and durable. Waterproof cover can better protect key hole.

Premium Quality,Durable：The white cover can be removed. Made of premium ABS and metal material, 12V-50V battery disconnect switch is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.

Waterproof & Protective Cover：This waterproof power disconnect cut off switch is designed with a waterproof cover on the top can better protect the key hole. Professional characteristics, high reliability. Compact size, sleek modern appearance, easy to install and Cable connection.

Disconnect Battery Safely：This battery isolator switch can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. 2-Position: ON and OFF positions

☆【Premium Quality,Durable】Made of premium ABS and metal material, 12V-48V battery disconnect switch is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.

☆【Waterproof & Protective Cover】This waterproof power disconnect cut off switch is designed with a waterproof cover on the top can better protect the key hole. Professional characteristics, high reliability. Compact size, sleek modern appearance, easy to install and wire

☆【Disconnect Battery Safely】This battery isolator switch can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. 2-Position: ON and OFF positions

This selector switch Warranty 3 years . If there are quality problems within 3 years, you can send us email. We will send you new ones.

Special attention: Light connect to 110V-220V ,Can light up ；Ith : 10A; Ui : 600V; Material : Plastic and Metal; Terminal Quantity : 4; Contact Type :1 NO; Action Type : Latching.

Waterproof grade ：IP65; LED Color : Green.Mount Hole Diameter : 22mm / 0.87"(7/8"); Fit Panel Thickness: Max 8.5mm / 0.33".

<p>♡ High Quality: The rotary switch has the advantages of safety, reliability and excellent design.<p>

<p>♡ Safety and Reliability: Secure the wire with screws to provide reliable contact and prevent accidential contact with the terminal.<p>

<p>♡ Easy Installation: Quick connection terminations, just strip your wire and push it in the proper terminal location.<p>

Product name:Changeover Switch;Model: LW26-63/3;Action Type: latching.

Product size:Total size 19cm/11cm/11cm(7.48in/4.32in/4.32in)(l * w * h).

Product parameters:Ui: 690V, Ith: 63A;positions: 3 positions(1-0-2); 3 phases, 12 terminals.

IP66 Waterproof: Rotary changeover switch has rubber sealing gasket. The switch is designed to be IP66 waterproof, with strong sealing and good waterproof, and can be used outdoors.

Safety Lock Hole: Waterproof rotary switch with safety lock hole. The switch position can be locked to avoid misoperation when not in use. It has high safety in outdoor.

Strong Conductivity: On‑off disconnect switch buttons has high conductivity nickel phosphor copper interior, which has good conductivity and longer service life.

MAIN SPECIFICATIONS AND TECHNICAL DATA - Shopcorp Selector Switch offers a three (3) position self-lock switch with an 22mm mounting hole and a maintained (latching) operation type. This piece is robust and lightweight. It can also be connected as a normally open (NO) switch or normally closed (NC) contact. It is made of plastic, metal and electronic components. No battery required. The buttons conform to the GB/T14048.5 standard.

WORKING CONDITION - Operating/Insulation voltage: 220VAC and 380V respectively; Contact current: 10A; Installation dimensions: Φ22mm; Protection grade: IP55; Certification: CE, CCC; Operating temperature: between -25°C and +70°C; Operating humidity: 50%; Vibration resistance: 15g, amplitude is about 1.0mm; Electrical durability/life: 50,000 times; Shock resistance: 200g. Switch type: Selector Rotary Switch; Mounting Type: Panel Mount. This selector switch must be fixed to use on the panel

VERSATILITY - This is used in industrial controlling circuits of AC 50Hz or 60Hz, rated operational voltage up to 380V and below, DC operational voltage of 220V and below for controlling the electromagnetic starter, contactor, relay and other automatic control electric circuits. It can be used under harsh weather conditions because of the lock, fall and vibration resistance. Shopcorp Selector switches are widely used, including in many electrical appliances in the home

UI: 220V, ITH: 63A, 3 Position, 8 Terminals.

Material: flame-retardant PC fuel, good insulation performance, high temperature resistance; using high-quality copper parts, good electrical conductivity; using silver alloy contacts, low resistivity, no arc.

Appearance: fine workmanship, flexible handle, small size, and long service life.

INDUSTRIAL QUALITY - Control box with 4 holes for 22mm push buttons or switches for multiple on/off, start/stop and self-resetting actions in circuits of AC voltage up to 380V and DC voltage below 220V. Includes two (2) flat head type pushbutton (red and green), one (1) 2-position maintained selector rotary switch and one (1) mushroom head emergency pushbutton. Please refer to Product Description for full specifications

HIGH VISIBILITY - Push buttons are highly visible in color, size and shape with a design that provides an easy and fast access to it, easy to operate in emergency situations

VERSATILITY - Useful for different kinds of home and industrial installations. Widely used for control of electronic and/or magnetic starter, contactor and relay, or other similar circuit. Can be used in mount panels, stations, machines and consoles of textile equipment and operating rooms or distribution boxes for ships, airplanes or cities

This selector switch Warranty 3 years . If there are quality problems within 3 years, you can send us email. We will send you new ones.

Special attention: Light connect to 110V-220V ,Can light up ；Ith : 10A; Ui : 600V; Material : Plastic and Metal; Terminal Quantity : 6; Contact Type :2 NO; Action Type : Momentary.

Waterproof grade ：IP65; LED Color : Red.Mount Hole Diameter : 22mm / 0.87"(7/8"); Fit Panel Thickness: Max 8.5mm / 0.33".

Color: White

Package Includes: 1 x Metal Selector Switch | 1 x Rubber O-ring

3 Position On/Off/On Selector Switch

The contacts are made of silver alloy, with low resistivity, good electrical conductivity, no arc, high temperature resistance of the alloy, no wear, and oxidation resistance.

Using flame-retardant PC material, good insulation performance, high temperature resistance, not easy to age.

Specification: Model: LW26-32/2; 3 Positions 8 Terminals, 380V 32A.

UL Certified (Ref#: E333442) in US and Canada

Waterproof/Dustproof Level: IP65

Compact & light weight, Comply with EN standard

UL Certified (Ref#: E333442) in US and Canada

Waterproof/Dustproof Level: IP65

Compact & light weight, Comply with EN standard

Specifications: PBS-33B(SD-211), brand new Round Push Button Switch - pack of six.There are five colors for you to choose from.

Function: The input voltage of this classic round head button switch is 3A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.

Design: switch is 2pin, single pole single throw design, with 200mm/7.87” pre-soldered wire,mounting hole size is 12mm/0.5inch.

Specifications: R13-507, brand new Round Push Button Switch - pack of ten.

Function: The input voltage of this classic round head button switch is 3A 250V AC/6A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.

Design: switch is 2pin, single pole single throw design, mounting hole size is 16mm/0.63inch.

UI: 440V, ITH: 20A, 3 Position, 4 Terminals.

Material: flame-retardant PC materials. Good insulation performance with high temperature resistance. Uses high-quality copper parts having good electrical conductivity. Silver alloy contacts, low resistivity, no arc.

Fine workmanship, flexible handle, small size, and long service life.

UL Certified (Ref#: E333442) in US and Canada

Waterproof/Dustproof Level: IP65

Compact & light weight, Comply with EN standard

UL Certified (Ref#: E333442) in US and Canada

Waterproof/Dustproof Level: IP65

Compact & light weight, Comply with EN standard

22mm Metal Selector Push Button Switch Maintained Self Latching 6 Pins 2NO2NC Waterproof Rotary 3 Position Switch