Best Screw Selector Switches in 2026

🔋【Material】: Heavy duty battery shut off switch made of ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm) & nuts for ignition protected to distinguish the different gears easily which you switch to even at night.

🔋【Easy Operation】: RV Battery switch with On/Off position in clear color labels. Switch ON=Power (green) to closed circuit, Switch OFF = No power (red) to the cut-off circuit.

🔋【Compatible 】: Used for 12-48V, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V, battery selector switch can stand alone or be locked together with other switch for minimizing battery loss and preventing electric leakage effectively.

Universal mount selector switch without AFD. Continuous Amps: 230, Momentary Amps: 345

Longer stud lengths for improved assembly and easier cable routing

Built with heavy-duty copper sweep contacts to ensure positive circuit control

Specification: Marine battery switch is in self-cleaning sliding contact design. Rated at 275 amps continuous, 455 amps intermittent, and 1250 amps cranking. Voltage: 12V-48V DC. Stud Size: 2x3/8'' (10mm)

Dual 1-2-Both-Off Battery Switch: With a battery shut off switch you can ON or OFF or both ON/OFF a group of loads irrespective of their individual ON/OFF switch control

Heavy Duty Boat Battery Switch: Made ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm). Marine battery kill switch Fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches

☀HIGH QUALITY DESIGN: Flame retardant PC material shape has good insulation and high temperature resistance. With flexible handle conversion, rotary selector is easy to control, square plate and screws for easily mounting.

☀EXCELLENT COPPER PARTS: Premium copper parts with silver alloy point, make it not easy to slide and has strong thermal conductivity. The quality and service life of changeover switch are improved, it is durable for use.

☀TECHNICAL SPECIFICATIONS: Model: LW28-32/2, 3 positions(1-0-2), 2 phases, 8 terminals latching type switch, Ui 690V Ith 32A. Image 3 has shown which terminal will be connected in different position, please read the wiring diagram as a reference.

☀HIGH QUALITY DESIGN: Flame retardant PC material shape has good insulation and high temperature resistance. With flexible handle conversion, rotary selector is easy to control, square plate and screws for easily mounting.

☀EXCELLENT COPPER PARTS: Premium copper parts with silver alloy point, make it not easy to slide and has strong thermal conductivity. The quality and service life of changeover switch are improved, it is durable for use.

☀TECHNICAL SPECIFICATIONS: Model: LW28-20/2, 3 positions(1-0-2), 2 phases, 8 terminals latching type switch, Ui 550V Ith 20A. Image 3 has shown which terminal will be connected in different position , please read the wiring diagram as a reference.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Product Name: 3 Position Lacthing Selector, Ui: 690V, Ith: 63A ; 12 Terminals.

Model: LW28-63/3, 3 positions(1-0-2), 3 phases, 12 terminals latching type switch

Versatile; use for 6-volt to 32-volt D. C. (direct current) systems

Rated for 300 amps continuous use at 6 volts and 150 amps continuous use at 12 volts

Includes an automatic alternator field circuit disconnect to prevent surges and so, protect your valuable boat electronics

Product name: 5 Position Changeover Selector Switch,Model: LW26-20-4/2

Action Type: latching; positions: 5 positions(0-1-2-3-4); 8 terminals

Ui: 550V, Ith: 20A; Uimp: 3KV;Total size:48x48x72mm/1.8"x1.8"x 2.8"（l * w * h）

Product name:Changeover Switch;Model: LW26-63/3;Action Type: latching.

Product size:Total size 19cm/11cm/11cm(7.48in/4.32in/4.32in)(l * w * h).

Product parameters:Ui: 690V, Ith: 63A;positions: 3 positions(1-0-2); 3 phases, 12 terminals.

IP66 Waterproof: Rotary changeover switch has rubber sealing gasket. The switch is designed to be IP66 waterproof, with strong sealing and good waterproof, and can be used outdoors.

Safety Lock Hole: Waterproof rotary switch with safety lock hole. The switch position can be locked to avoid misoperation when not in use. It has high safety in outdoor.

Strong Conductivity: On‑off disconnect switch buttons has high conductivity nickel phosphor copper interior, which has good conductivity and longer service life.

Material: The inline rotary cord switch is made of durable plastic material, which is resistant to aging and heat. It is not easily damaged, can be reused for a long time, and is easy to install and store.

Gear inline switch adopts flexible gear conversion, rotation selector is easy to control, high quality copper parts with silver alloy points, not easy to slide and strong thermal conductivity. Improve the quality and service life of the transfer switch.

A well-built switch, this inline swivel line switch design thumb wheel operator is perfect for replacing old switches and adding a switch for your light fixture or equipment.

【Lamp Line Cord Switch Specification】Rating: 6A 125VAC / 3A 250VAC / 3A 125VT. Material: Phenolic / Plastic. Wire: SPT-1. Funtion: ON-OFF. Color: White. Perfect replacement and fit.

【Durable & Safe Use】Durable Plastic, Exquisite Craftsmanship And Heat - Resistant, Not Easy To Damage, Can Be Reused For A Long Time, Easy To Install And Store. Very Suitable For Switching Off The Switch Before Replacing Your Light or Electrical Appliances.

【Range Of Application】Widely Used In SPT - 1 Light Line, Office, Home, Bedroom Light Switch Replacement, All Kinds Of Lighting Products And Electrical Appliances With Power Line Control, This Embedded Switch Design Thumb Wheel Operator Is Very Suitable For Replacing The Old Switch, Adding A Switch For Your Lamps Or Equipment.

UI: 220V, ITH: 63A, 3 Position, 8 Terminals.

Material: flame-retardant PC fuel, good insulation performance, high temperature resistance; using high-quality copper parts, good electrical conductivity; using silver alloy contacts, low resistivity, no arc.

Appearance: fine workmanship, flexible handle, small size, and long service life.

UI: 380V, ITH: 32A, 3 Position, 12 Terminals.

Material: flame-retardant PC fuel, good insulation performance, high temperature resistance; using high-quality copper parts, good electrical conductivity; using silver alloy contacts, low resistivity, no arc.

Appearance: fine workmanship, flexible handle, small size, and long service life.

UI: 380V, ITH: 25A, 3 Position, 16 Terminals.

Material: flame-retardant PC fuel, good insulation performance, high temperature resistance; using high-quality copper parts, good electrical conductivity; using silver alloy contacts, low resistivity, no arc.

Appearance: fine workmanship, flexible handle, small size, and long service life.

UI: 440V, ITH: 20A, 3 Position, 4 Terminals.

Material: flame-retardant PC materials. Good insulation performance with high temperature resistance. Uses high-quality copper parts having good electrical conductivity. Silver alloy contacts, low resistivity, no arc.

Fine workmanship, flexible handle, small size, and long service life.

UI: 380V, ITH: 32A, 3 Position.

Material: flame-retardant PC fuel, good insulation performance, high temperature resistance; using high-quality copper parts, good electrical conductivity; using silver alloy contacts, low resistivity, no arc.

Appearance: Beautiful appearance, fine workmanship, flexible handle, small size, waterproof and dustproof can be installed outdoors, and long service life.

You can install this battery disconnect switch easily due to the simple structure design and fine workmanship.

You can directly replace your old or damaged one because it features better performance and high reliability.

It is constructed of plastic and copper material.