Best Gmtools Jobber Drill Bits in 2026

The sharp, aggressive bite of the 135-degree split point makes a noticeable difference the moment the bit touches stainless steel. Unlike standard HSS sets that struggle and wander, these GMTOOLS bits use a precision-ground tip that centers itself instantly, allowing you to drill with significantly less downward pressure. The M35 alloy, reinforced with 5% cobalt, feels much tougher than the typical 4241 HSS you find in hobbyist kits, making it a reliable choice for heavy-duty tasks in cast iron or hardened metals. I also appreciated the twist design, which clears chips away quickly to prevent overheating during long runs. Everything arrives neatly organized in a heavy-duty metal indexed case that keeps the full range of sizes from 1/16 to 1/2 inch easy to find and secure.

Most drill bit sets fail the moment they touch stainless steel, but the cobalt content in this GMTOOLS kit changes the math entirely. By integrating a 5% cobalt alloy into the M35 high-speed steel, these bits handle hardened metals and cast iron without the immediate thermal degradation seen in standard HSS sets. I was particularly impressed by the 135-degree split point. It bites into the material instantly and stays centered, which effectively eliminates that frustrating 'walking' effect when starting a hole. The twist design also does a great job of clearing chips quickly, preventing jams during deeper penetrations. With a massive 115-piece range covering fractional, letter, and numbered sizes, it is a comprehensive professional-grade solution housed in a very organized, indexed metal case.

The GMTOOLS 29-piece drill bit set stands as a top-tier choice for DIYers and professionals tackling tough metalwork. What really sets these apart is the 135-degree split point design, which allows the bits to center themselves automatically and bite into hard materials like stainless steel and cast iron without the frustrating 'walking' effect. The combination of high-speed steel with a black and gold oxide finish isn't just for looks. It significantly boosts resistance against corrosion and wear during heavy use. I found the twist design particularly effective at clearing metal shavings out of the hole quickly, reducing friction and heat. Everything arrives neatly organized in a rugged, metal indexed storage case that makes finding the exact size from 1/16 to 1/2 inch incredibly simple.

Any DIYer or mechanic tired of snapping cheap bits on stainless steel needs the GMTOOLS 13-piece cobalt set in their toolbox immediately. I was impressed by the M35 alloy composition, which uses 5% cobalt to provide much better wear resistance than standard HSS bits. The 135-degree split point is a game changer because it bites into hardened metal and cast iron without that annoying tendency to wander across the surface. Because of the precision grinding and the twist design, chip evacuation is smooth, meaning you aren't fighting clogged holes mid-drill. It covers a solid range of sizes from 1/16 to 1/4 inch, all tucked away in a compact plastic case that keeps your workspace organized.

Metalworkers tired of snapping cheap bits on stainless steel need the GMTOOLS M35 Cobalt set in their toolbox immediately. These aren't your standard hardware store bits. The 5% cobalt infusion provides the heat and wear resistance necessary for punishing materials like cast iron and hardened steel. I was particularly impressed by the 135-degree split point design, which bites into the material instantly to prevent that frustrating bit-walking during setup. The gold oxide finish and precision-ground spiral grooves ensure smooth chip clearance, which keeps the friction and heat down during heavy drilling. Whether you are working through aluminum alloys or tough steel, this 15-piece jobber length kit offers a reliable range of sizes from 1/16" to 3/8" in a convenient indexed case.

After weeks of use in my workshop, these GMTOOLS cobalt bits have proven to be a reliable staple for heavy-duty drilling tasks. The M35 high-speed steel, enriched with 5% cobalt, handles the heat of stainless steel and cast iron without losing its edge. I was particularly impressed by the 135-degree tip design, which prevents the bit from walking and allows for much faster penetration with less downward pressure. Even when working through harder materials like titanium alloy or galvanized pipe, the flute design clears debris efficiently to keep friction low. They are easy to maintain too, as the uniform hardness allows for repeated sharpening. The included sturdy plastic case keeps the ten 1/4-inch bits organized and ready for the next project.

After weeks of use on various heavy-duty workshop projects, these GMTOOLS cobalt bits have proven to be a reliable staple in my toolbox. The M35 high-speed steel, infused with 5% cobalt, handles the heat of drilling through stainless steel and cast iron without losing its edge. I was particularly impressed by the 135-degree tip design. It bites into hard metals with minimal pressure and prevents the bit from wandering during the initial start. The straight shank keeps everything precise, while the flute design clears out debris quickly to reduce friction. Even after several sessions, the uniform hardness allows for sharpening without compromising the cutting edge. For a ten-pack that comes in a sturdy, organized storage case, the performance far exceeds the entry-level expectations.

Why settle for dull, slipping bits when a single kit can handle almost any workshop task? The GMTOOLS titanium-coated set is a massive 230-piece collection that takes the guesswork out of finding the right size for everything from delicate wood projects to heavy-duty metalwork. Built from 4241 high-speed steel, these bits are designed to clear chips and particles quickly, which keeps your drilling precise and prevents overheating. I found the self-centering jobber design particularly useful because it stays stable without needing a pilot hole first. Whether you are working with aluminum, copper, or mild steel, the titanium coating adds a layer of wear resistance that makes this kit feel like a professional-grade investment for any renovation or repair job.

The golden shimmer of titanium coating catches the light immediately, signaling a kit built for more than just occasional household repairs. I put these GMTOOLS bits to the test across a variety of materials, and the high-speed steel performs impressively by clearing chips and particles rapidly to maintain precision. Whether you are working through aluminum, copper, or soft alloy steel, the self-centering jobber design keeps the bit steady without needing a pilot hole first. The sheer variety in this 99-piece collection—ranging from tiny 1/16" bits to larger 3/8" sizes—means you are rarely caught off guard during a renovation. It feels like a professional-grade solution for anyone moving between cordless hand drills and a dedicated drill press.

The GMTOOLS 21-piece cobalt drill bit set delivers heavy-duty performance through its specialized M35 alloy construction. I found that the 5% cobalt content makes a massive difference when you are working through tough materials like stainless steel or cast iron, as the bits maintain their edge much longer than standard HSS sets. The 135-degree split point is a game changer for precision. It bites into the material immediately without that annoying tendency to wander or walk across the surface. Because of the twist design, chip evacuation stays efficient even during deeper holes. Everything arrives neatly organized in a sturdy, indexed metal case, which is a huge relief for keeping your workshop organized. It is a reliable, professional-grade kit for anyone tackling hardened metals.