Best Bosch Short Length Drill Bits in 2026

Makartt has essentially delivered a professional-grade nail lab in a box that simplifies complex manicures for both pros and DIY enthusiasts. This ten-piece tungsten carbide set is a powerhouse for anyone tackling heavy-duty removals like acrylic or hard gel. Because tungsten carbide is incredibly durable, these bits handle grinding and reshaping with minimal friction, which means you aren't battling excessive heat or messy dust clouds during your session. The variety is impressive, ranging from fine barrels for smoothing to specialized safety and small-cone bits for precise cuticle work. Whether you are sharpening a shape or carving builder gel, these 3/32 inch bits fit most standard machines and offer the precision needed to protect your natural nails while achieving salon-quality results at home.

Most toolboxes are cluttered with long drill bits that are completely useless the moment you encounter a corner or a tight cabinet frame. This Neiko stubby set solves that exact headache by trading length for maneuverability. Ranging from just 1.9 to 2.32 inches, these bits are specifically engineered for those cramped, frustrating spaces where a standard bit simply won't fit. The molybdenum M2 high-speed steel construction feels surprisingly substantial, and the 135-degree tip design bites into metal and plastic without much fuss. You get five essential sizes—from 3/32 to 5/16 inch—along with a handy hex shank holder that keeps everything organized. It is a specialized kit that turns an impossible drilling job into a quick task.

You are halfway through assembling a heavy-duty deck when your standard screwdriver bits start stripping under the pressure of the impact driver. This 42-piece set is designed specifically to prevent that frustration by using impact-tough engineering that handles high-torque loads far better than your average hardware store find. I found that the variety of Phillips, Slotted, and Torx sizes covers almost every household repair or construction task you could encounter. The tips feel reinforced and stay seated in the screw heads even when you are pushing the power tool to its limit. Plus, the included plastic storage case keeps everything organized and latched shut, so you aren't digging through a messy toolbox to find the one specific size you need mid-project.

These MAX-CRAFT HSS Cobalt drill bits represent a massive efficiency boost for any metalworking kit due to their ingenious dual-ended design. Instead of reaching for a new bit every time one dulls, you simply flip the stubby body to access a fresh cutting point, effectively doubling your inventory with a single tool. The 135-degree split point is a total game-changer because it self-centers immediately, meaning you can skip the tedious center punch step and dive straight into the material. Whether you are boring through tough stainless steel or working with softer metals like copper and aluminum, the hardened cobalt material handles the heat and pressure with ease. It is a practical, high-value solution for anyone tired of wasting time on bit changes mid-project.

Most DIYers settle for standard HSS bits that dull the moment they hit stainless steel, but the Yougfin Cobalt set is built for much tougher workloads. These M35 high-speed steel bits incorporate cobalt to handle the intense friction and heat that usually destroys cheaper tools. I was particularly impressed by the 135° split point design. It bites into the material immediately, which significantly reduces the pressure needed to stay centered. The dual-flute architecture does a great job of clearing out chips and allowing coolant to reach the cutting edge during heavy use. Whether you are working through sheet metal, non-ferrous metals, or even wood, this 21-piece assortment covers a massive range of sizes from 1/16" up to 3/8". Just remember to keep your drill perpendicular to prevent any breakage during high-speed operation.

The COMOWARE Stubby Drill Bit Set solves the headache of tight-clearance drilling with its ultra-short profile. I found that these bits are a lifesaver when you're working in cramped spaces where a standard-length bit simply won't fit. They are crafted from high-quality HSS M2 material with evenly distributed carbides, which keeps the cutting edge sharp even after repeated use. The 135-degree split point is a game changer for penetration, effectively clearing chips and sawdust while biting into metal, plastic, or wood without slipping. Plus, the 1/4-inch hex shank makes swapping them into a quick-change chuck incredibly seamless. It is a compact, reliable kit for anyone needing precision in confined areas.

Machinists working with hardened metals need to ditch standard high-speed steel and upgrade to this Drill America cobalt set immediately. The M35 cobalt construction is a massive step up for tool longevity, especially when you are pushing through tough materials that usually burn out cheaper bits. I found the 135-degree split point to be a total game-changer because it bites into the work surface without needing a pilot hole, which saves a ton of time. The gold oxide finish isn't just for show. It acts as a built-in lubricant that helps manage heat and wear. Since these meet ANSI specifications and come in precise 1/64" increments, you get a professional-grade kit that actually performs under pressure.

The distinct gold oxide finish on these bits immediately signals that you are dealing with serious cobalt steel rather than standard high-speed alternatives. I found that the extra cobalt content makes a massive difference when you are pushing through stubborn materials like stainless steel or nickel alloys that usually chew up lesser bits. These stub drills feature a right-hand cut spiral flute design that does a great job of evacuating chips up and out of the hole, which prevents that frustrating clogging during deep cuts. Because they utilize round shanks, they fit seamlessly into almost any toolholding system I tested, whether I was using a handheld portable drill or a stationary machine. It is a reliable, heavy-duty set for anyone who needs to tackle harder metals without constant tool failure.

This 32-piece impact driver bit set offers an impressive balance of versatility and ruggedness for any home toolkit. After testing the set, the most striking aspect is the S2 steel construction. The black finish isn't just for aesthetics, it provides a layer of wear resistance that handles the high torque of impact drivers without immediate stripping. Whether I was tackling small electronic repairs or larger furniture assembly, the variety of 31 bits ensured I always had the right fit. The included magnetic bit holder is a lifesaver for working in tight spaces, and the compact, sturdy plastic case keeps everything organized and portable. At this price point, it is a reliable foundational set for anyone needing a dependable driver kit for household appliances and general DIY projects.

Home renovators tackling bathroom upgrades or glass installations need this specific set to avoid the heartbreak of shattered tiles. I found the Denali carbide bits to be exceptionally well-engineered for high-stress tasks, featuring reinforced heads designed specifically to prevent the cracking that usually plagues cheaper alternatives. The variety is impressive, covering everything from a tiny 1/8-inch up to a substantial 3/4-inch, making it a versatile companion for drilling through mirrors, glass, and ceramic. I particularly liked the clear labeling on each bit, which saves a massive amount of time when you're in the middle of a precise job. Everything stays organized in the included storage case, and the one-year limited warranty provides a nice layer of confidence for a tool at this price point.

The heavy weight of the metal case tells you immediately that this isn't a cheap plastic kit destined for the junk drawer. Vector Tools has designed this 29-piece set with a specific focus on tight workspaces where standard-length bits usually fail. The stubby profile allows you to maneuver in cramped corners, while the 135-degree split point does the heavy lifting by self-centering right from the start. I found the incremental sizing from 1/16" to 1/2" incredibly precise for detailed work, and the black and gold finish gives the whole set a professional, industrial aesthetic. Having them neatly organized and drill-indexed in that sturdy case makes grabbing the exact size you need a seamless part of your workflow.

After weeks of use on various heavy-duty workshop projects, these GMTOOLS cobalt bits have proven to be a reliable staple in my toolbox. The M35 high-speed steel, infused with 5% cobalt, handles the heat of drilling through stainless steel and cast iron without losing its edge. I was particularly impressed by the 135-degree tip design. It bites into hard metals with minimal pressure and prevents the bit from wandering during the initial start. The straight shank keeps everything precise, while the flute design clears out debris quickly to reduce friction. Even after several sessions, the uniform hardness allows for sharpening without compromising the cutting edge. For a ten-pack that comes in a sturdy, organized storage case, the performance far exceeds the entry-level expectations.

Why struggle with long bits that wander or won't fit when you can use specialized tools designed for the tightest corners? The NordWolf 5-piece set is a lifesaver for anyone tackling heavy-duty metalwork in confined spaces. These M35 cobalt bits are precision-ground and incredibly tough, meaning they won't quit when you hit stainless steel, titanium, or cast iron. I found the stubby design—ranging from just 1.84 to 2.32 inches—to be the real game-changer for accessing awkward angles. The 135° split point on the larger bits ensures they self-center immediately, preventing that frustrating walking effect on hard surfaces. Plus, the 1/4-inch hex shank makes them ready for your impact driver right out of the box. Even the storage case is thoughtful, featuring size imprints and a pegboard clip for easy organization.

You might hesitate to trust a budget-friendly bit set for your serious woodworking projects, but the Denali Auger Drill Bit Set proves that precision doesn't always require a massive investment. I was particularly impressed by the screw point tip, which essentially handles the heavy lifting by self-feeding through the wood so you aren't fighting the tool. The tri-flute design is a game-changer for cleanliness, leaving behind much smoother holes than standard bits. While these work well for various tasks, keep in mind that once you move into the larger sizes like the 1-1/4 inch bit, you’ll definitely want to switch to a corded drill for maximum torque. It is a solid, organized kit that comes with a compact storage case to keep your workspace tidy.

Most woodworkers assume that short drill bits are inherently flimsy, but the NordWolf stubby set proves that compact design can actually be a precision advantage. At just 2.32 inches long, these bits are absolute lifesavers when you are working inside cabinetry or tight corners where a standard bit simply won't fit. The high-speed steel construction feels surprisingly rugged, and the precision-ground brad point tips do exactly what they should by self-centering to prevent the dreaded bit-walk on hard surfaces. Whether you are tackling plywood, MDF, or even softer metals like aluminum, the integrated 1/4-inch hex shank makes switching between your impact driver and quick-change chucks seamless. It is a specialized little kit that solves a very specific, frustrating workspace problem.

Most hobbyists settle for flimsy bits that wander across the metal surface, but this Viking Drill and Tool set is engineered for precision from the first contact. These heavy-duty stub length bits utilize a 135-degree split point, which virtually eliminates the walking effect common with standard drills. Because they are crafted from high-speed steel, they handle both ferrous and nonferrous materials with impressive wear resistance. The black oxide coating is a standout feature here, specifically designed to prevent chip building and welding while working through tough low carbon or stainless steel. Whether you are working in a machine shop or a home garage, the NAS 907C screw machine length provides a professional-grade stability that makes drilling through dense metals much less frustrating.

You might assume a budget-friendly drill bit set won't hold up under pressure, but the Mesee 6-piece set proves that specialized geometry matters more than a massive price tag. These bits are crafted from 4241 High Speed Steel, which provides the necessary hardness to bite into tough materials without immediate dulling. What really sets them apart for woodworking is the optimized spur design. It grabs the wood fibers instantly to prevent walking or splintering before the spiral twist even engages. The 1/4-inch hex shanks make swapping them into your driver incredibly seamless, whether you are working with plywood, MDF, or even soft metals like copper and aluminum. It is a versatile little kit that covers the essential small-diameter sizes you actually need for precision tasks.

You are staring down a thick slab of stainless steel or titanium, knowing that a standard drill bit will likely wander or burn out before you even make a dent. These Champion Cutting Tool stubby bits are engineered specifically for those high-tensile nightmares. Because they feature a shorter flute and overall length, they offer significantly more rigidity than your typical long-flute bits, which translates directly to better hole accuracy and less deflection. The premium cobalt high-speed steel handles extreme heat like a pro, while the 135-degree split point ensures you bite into the material immediately without walking. Whether you are working with manganese steel or armor plate, these American-made tools are built to stay sharp and stable under intense pressure.

Most people assume a shorter drill bit is inherently weaker, but the Chicago Latrobe 159 Series actually uses that compact design to gain an edge in rigidity. By utilizing an extra thick web, these high-speed steel bits offer a level of strength that standard lengths often lack, making them incredibly stable during heavy drilling. The 135-degree split point is a total game-changer because it bites into hard materials immediately without needing a pilot hole to guide it. I noticed the black oxide finish isn't just for show. It actively helps with chip flow and coolant management when you're working through tough ferrous metals. Since these are made in the USA and come in a sturdy metal case, they feel like a professional-grade investment rather than a disposable hardware store afterthought.

Precision becomes a lot easier when you are trying to align a hinge on a piece of MDF without the bit wandering across your workpiece. This Wolfride set uses a dedicated brad-point tip design that bites into the material immediately, ensuring your hole starts exactly where you marked it. Since these are crafted from 4241 High Speed Steel, they hold up well against common shop materials like fiberboard and particleboard. The stubby design is particularly handy for tight spaces where a standard-length bit would be too cumbersome. With a 1/4-inch hex shank, you can swap them in and out of your power tools in seconds, making the transition between the 3/32 and 3/8 sizes feel seamless during a busy project.

The Saipe 5-piece stubby drill bit set solves the headache of drilling in cramped corners where standard bits simply won't fit. These little workhorses are built from heat-treated M2 HSS, giving them the hardness needed to tackle wood, plastic, and thin metals like aluminum without losing their edge. Because they are only 2.36 inches long, they provide a level of rigidity that longer bits lack, preventing that annoying flex when you're applying pressure. The 135-degree tip design is a standout, ensuring the bits bite into the material immediately to prevent slipping. Whether you are using a right-angle attachment or working inside a cabinet, this compact set covers five essential sizes to keep your projects moving smoothly in tight quarters.

Ever found yourself staring at a tight corner where a standard-length bit simply won't fit? The CORTOOL Stubby Drill Bit Set is the specialized solution for those cramped, awkward workspaces that usually stall a project. These bits are crafted from high-grade HSS M2 steel with evenly distributed carbides, ensuring they stay sharp even when punching through hard metal, plastic, or wood. The 135-degree split point design is a game-changer for clearing chips quickly and preventing walking on hard surfaces. I particularly like the 1/4-inch hex shank, which makes swapping between the five included sizes—ranging from 3/32” to 5/16”—incredibly fast and secure in any quick-change chuck. It is a compact, heavy-duty essential for any toolkit.

The sharp, needle-like tip of these Cortool bits bites into wood immediately, eliminating that frustrating moment where a standard bit skids across your workpiece. I found that the brad-point design makes centering on a mark incredibly easy, which is a lifesaver for precision joinery. Because these are stubby bits—ranging from about 1.82 to 2.32 inches—they perform beautifully when paired with a right-angled drill in tight, awkward corners where a full-sized bit simply won't fit. The High Speed Steel 4241 construction feels surprisingly durable, cutting through tough timber without losing its edge quickly. With the included hex shank holder and a versatile range of six sizes from 3/32” to 3/8”, this set is a compact powerhouse for any woodworker's toolbox.

Machinists working with high-precision aerospace tolerances demand tools that refuse to wander, and these Chicago Latrobe bits deliver exactly that level of stability. Because they are manufactured to NAS 907 Type C geometry, you aren't just getting a standard bit. You are getting a professional-grade instrument designed for extreme accuracy. The shorter flute length is a game-changer for heavy feed rates, providing the rigidity needed to virtually eliminate deflection. I found the 135-degree P3 split point incredibly helpful for self-centering, which takes the guesswork out of initial penetration. Plus, the black oxide finish isn't just for show—it actually helps hold coolant right where the cutting edge meets the material, keeping things smooth and cool during intense drilling tasks.

Precision Twist M40CO cobalt steel drill bits deliver exceptional hardness for those tackling the toughest materials. I found the cobalt-infused high-speed steel provides that perfect balance of toughness and durability needed when you aren't working with soft metals. The 135-degree split point is a game changer because it stays self-centering, which means you won't deal with the bit walking across your workpiece. The short-length design adds a layer of rigidity that prevents snapping under pressure, while the bronze oxide finish helps retain cutting fluid to stop chips from welding to the tool. Whether you are using a standard drill or a specialized holder, the round shanks ensure these bits fit into almost any tool-holding system you own.

You are standing at a CNC lathe, ready to bore through a stubborn piece of stainless steel, and you need a bit that won't deflect or dull instantly. This uxcell tungsten carbide drill bit is built specifically for those high-precision moments where material hardness matters. Because it uses medium grain C2/K20 carbide, it hits a high hardness of HRA89, allowing you to push cutting speeds much faster than standard substrates. The spiral flute design does a fantastic job of clearing chips quickly, which prevents those frustrating heat buildups and glitches during a deep cut. Whether you are working with aluminum, copper, or cast iron, the sharp cutting edge maintains smooth dimensional accuracy. Just remember to clamp it deep in the chuck to minimize vibration and keep your machining smooth.

Most DIYers settle for standard bits that dull the moment they touch stainless steel, but the NordWolf M35 Cobalt set is built for much tougher battles. These aren't your average hardware store bits. The M35 cobalt steel is precision ground to handle hardened metals like titanium, cast iron, and bronze without breaking a sweat. I was particularly impressed by the stubby 2.32-inch design, which makes drilling in cramped, tight spaces surprisingly easy. The 135° split point tip does the heavy lifting by self-centering instantly, so you aren't fighting to keep the bit on track. Plus, the 1/4-inch hex shank means you can swap them straight into an impact driver without fumbling with a traditional chuck.

Standard drill bits often fail precisely because they are too long for the tightest workspaces. These MAXTOOL stub drills solve that problem by trading length for incredible structural stability, making them perfect for cramped screw machine operations where breakage is a constant threat. Built from M2 high-speed steel, they feel exceptionally hard and maintain a sharp edge even when tearing through metal, plastic, or wood. The 135-degree chisel angle and split point are game-changers because they bite into the material immediately without that frustrating tendency to wander or walk across the surface. Because they are fully ground, chip evacuation is smooth, which keeps the heat down and the cutting performance consistent during heavy-duty runs.

The compact, heavy-duty feel of these NordWolf bits makes them an immediate standout in any cramped toolbox. Because they are only 2.36 inches long, you can finally stop struggling to maneuver standard bits into tight, awkward corners where space is at a premium. The M35 cobalt alloy steel is clearly built for the heavy lifting, biting through stainless steel and aluminum without the immediate heat fatigue you see in cheaper sets. I was particularly impressed by the 135° split point design, which keeps the bit from walking across the metal surface, allowing for a clean, self-centering start every time. Whether you are using a standard drill or an impact driver, the integrated 1/4-inch hex shank ensures a secure, wobble-free connection.

You are halfway through a delicate cabinetry installation when you realize your standard drill is far too long to reach the corner joint. That is exactly where this Yakamoz stubby set saves the day. Measuring just 2-3/8 inches, these bits are designed specifically for those frustratingly tight spaces where a right-angle drill or a compact driver is your only option. The 135-degree brad point design prevents the bit from wandering, ensuring clean, precise holes in tough wood every time. Since they are crafted from heat-treated 4241 HSS, they hold up remarkably well under pressure. The 1/4-inch quick-change hex shanks make swapping between the six imperial sizes—ranging from 3/32" to 3/8"—incredibly fast and seamless during a busy project.