Best Bosch Short Length Drill Bits in 2026
Daisy
Last Updated: Jul 17, 2026
Daisy
Last Updated: Jul 17, 2026
* PickSmartly editors independently research, review, and endorse the top products through comprehensive data analysis. We may earn a commission for qualifying purchases made through our product links.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| uxcell | 9.95 | ✅ | ✅ | ✅ |
Specification: Cutting edge diameter (CED): 0.6mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amadeo City | 9.86 | ✅ | ✅ | ✅ |
PCB Drill Bit: Cutting edge diameter: 1.2mm / 0.047"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amadeo City | 9.87 | ✅ | ✅ | ✅ |
Twist Drill Bits: Drilling Diameter: 1mm / 0.039"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amadeo City | 9.86 | ✅ | ✅ | ✅ |
Twist Drill Bits: Drilling Diameter: 3.3mm / 0.13"; Flute Length: 35mm / 1.38";Overall Length: 60mm / 2.36". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
Wide Applications: Suitable for precision cutting of stainless steel, alloy steel, carbon steel, tool steel non-ferrous metal, copper, plastics, etc.. Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
Material: Constructed from YG10X carbide (tungsten steel), the drill bit is hardened up to 91.5HRA, wear resistance, corrosion resistance, heat resistance, and the bending strength is greater than or equal to 2800 N/mm2.
Features: Carbide tool offers long tool life and faster cutting speeds than other substrates, and it is higher hardness but is more brittle. Carbide material with good cutting performance, can ensure high work efficiency.
Tips: Used on machining centers, CNC lathes. Adapt to several kinds of cooling conditions, such as oil mist, water, oil, air cooling. It is not recommended to be used with a hand drill. Hand drill is easy to shake, poor stability, which makes drill bit easy to twist off.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| uxcell | 9.95 | ✅ | ✅ | ✅ |
High Speed Steel tool - 20.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
Polished Finish - Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Wide Application - Drill low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing. (Hardness of the material to be drilled should not exceed 29HRC.)
Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals, and the feed speed should be controlled. Increased use of water lubrication will extend drill bit life.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| uxcell | 9.95 | ✅ | ✅ | ✅ |
Total Length: 108mm / 4.3"; Shank Diameter: 6.8mm
Product Name: Twist Drill Bit; Package Content: 3pcs x Twist Drill Bit
Material: HSS, Cobalt; Flute Length: 58mm / 2.3"
Bit Diameter: 6.8mm; Weight: 66g
Fearure: Straight Shank; Color: Champagne Color
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amadeo City | 9.87 | ✅ | ✅ | ✅ |
Drill Bits: Cutting edge diameter: 2.8mm / 0.11"; cutting edge length: 55mm / 2.17"; shank diameter: 2.8mm / 0.11"; overall length: 100mm / 3.94"; cutting hardness (max.): HRC55. Sharp cutting edge provides smooth cutting and no glitches.
Wide Applications: Suitable for drilling materials below HRC55, such as stainless steel, alloy steel, tool steel, carbon steel, aluminum alloy, etc.. Used on machining centers, drilling machines, CNC lathes, CNC engraving and milling machines.
Carbide Material: Made of super fine grain carbide, it has high hardness (HRC92-94), wear resistance, heat resistance, and high bending strength. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
Features: Large and spiral chip space design for fast and clean chip removal. Titanium nanometer coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.
Tips: Suitable lubricant is conducive to cutting or cooling. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life.
Here is the list of top-rated brands that were evaluated by PM.
| Brand | Count |
|---|---|
| Uxcell | 31 |
We've carried out a comprehensive analysis of 467 reviews on short length drill bits, using our selection criteria to identify the best options in the foot, hand & nail care products. Our findings reveal that most customers typically select short length drill bits priced around $10.52, with top brands including makartt, comoware, nordwolf, denali, amazon basics, chicago latrobe, drill america, cortool and uxcell and vector tools
Our team of expert editors reviewed these high-quality items and handpicked the top 7 short length drill bits for your consideration. We've also done extensive research on numerous sellers, identifying the best ones in the foot, hand & nail care products category. These include pebeauty, tg tools, nordwolf tools, amazon.com, cortool, amadeo city, jr quality tools, mesee us and empire rigging & supply and wolfride online .
We are dedicated to assisting our users in finding the right bits Products based on their needs, saving them considerable time when choosing which short length drill bits to buy. We take pride in the number of satisfied users we've helped through our thorough and insightful reviews.
PickSmartly is dedicated to creating a platform designed to streamline your shopping experience, empowering you to make well-informed purchasing decisions with minimal time and effort. At the heart of our mission is the commitment to earning and maintaining the trust of our users, as we believe this to be fundamental to the services we provide.
When you engage with our websites, services, or tools, we or our approved service providers may utilize cookies to store information. This is done to enhance your user experience by making it more efficient, secure, and tailored to your preferences, as well as for marketing objectives.
We are an Amazon Associate and earn commissions from qualifying purchases. Our participation in the Amazon Services LLC Associates Program, an affiliate advertising initiative, provides us with a means to generate income through links to Amazon.com and its affiliated websites. Please note that Amazon, Amazon Prime, their logos, and the Amazon Prime logo are registered trademarks of Amazon.com, Inc., or its associated companies.
