Best Bosch Short Length Drill Bits in 2026

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

HSS Titanium Coating - High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.

Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for steel sheets/ aluminum sheets/ copper/ plastic/ wood board and many other types of sheet metal with ease countersunk. Suitable for Home DIY, and General Building/ Engineering Use.

Design - The split point tip is at 118 degrees to increase the wear resistance. The two flute design provides a smoother cutting, allows the material particles escape easily for a much more clean drilling operation.

HSS Titanium Coating - High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.

Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal/wood/plastic countersunk. Suitable for Home DIY, and General Building/Engineering Use.

Design - The split point tip is at 118 degrees to increase the wear resistance. The two flute design provides a smoother cutting, allows the material particles escape easily for a much more clean drilling operation.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

✔️【DOUBLE END DRILL BIT SIZE】:  1/8"(Diameter) x 5/8"( Flute Length) x 2" (Overall Length)

✔️【MATERIAL】: HSS Cobalt Material is the best hardened material for drilling longest life

✔️【DOUBLE END CUTTING POINT 】:The 2 cutting point of one single drill bit, when one cutting point is used bored and the other cutting end can be used, as another new drill bit.

【High Quality】High Speed Steel (HSS) drill bits for extra durability and long lifetime

【Efficient Design】Stubby drill bits measure 2.32-inch only, allowing access to hard-to-reach and tight spaces. Precision ground brad point drill tip (1/16-inch with 118°) for perfect self-centering, accurate positioning and fast drilling

【Multi-Purpose Use】Suitable for hard wood, laminated wood and laminate, fiberboard, particleboard, plywood, plastic, PVC, MDF, acrylic, nylon, rubber

Material: Classic High Speed Steel 4241 for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.

Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled.

Quick Change: 1/4 inch(6.3mm) hex shanks are compatible with both standard and quick change Chuck Drivers, fit into most power tools more easily and securely. providing versatility in drilling needs.

Material: Constructed of M2 HSS with strict heat-treatment to enable high hardness and tensile to keep long cutting life to drill vary wood material.

Tip Design: The 135-degree standard tip design not only promises strong sharpness, but also prevents slippage and makes drilling stable and precise. Smaller bits like this are much more rigid, and will not flex like long Bits.

5pcs Short Bit Set Sizes: 3/32, 1/8, 3/16, 1/4, 5/16-inch which meet your different drilling requirement. total length: 2.36”/60mm. Easy to use light, compact and durable.

Parameter: Cutting and Shank Dia : 2mm / 0.08", Cutting Edge Length: 25mm / 0.98", Twist Drill Total Length : 49mm / 1.93".

Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc.

How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool.

Twist Drill Bits: Drilling Diameter: 1mm / 0.039"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Parameter: Cutting and Shank Dia : 4mm / 0.16", Cutting Edge Length: 43mm / 1.69", Twist Drill Total Length : 75mm / 2.95".

Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc.

How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool.

Twist Drill Bits: Drilling Diameter: 6mm / 0.236"; Flute Length: 30mm / 1.18"; Overall Length: 55mm / 2.17"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Twist Drill Bits: Drilling Diameter: 1.8mm / 0.071"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

【High Quality】M35 Cobalt alloy steel drill bit for improved performance, extra durability and long lifetime. Fully grounded for easy particle removal, decrease friction, and precise drilling

【Stubby Sizes】Drill bits measure only 2.36-inch in overall length with 1-inch cutting flute, allowing access to hard-to-reach and tight spaces

【Efficient Design】135° split point two-blades special design drill tip (1/8-inch and larger) for perfect self-centering and fast drilling

Twist Drill Bits: Drilling Diameter: 9mm / 0.354"; Flute Length: 35mm / 1.38"; Overall Length: 65mm / 2.56"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Parameter: Cutting and Shank Dia : 5.5mm / 0.22", Cutting Edge Length: 55mm / 2.17", Twist Drill Total Length : 93mm / 3.66".

Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc.

How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool.

Twist Drill Bits: Drilling Diameter: 5.2mm / 0.205"; Flute Length: 28mm / 1.1"; Overall Length: 50mm / 1.97"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Twist Drill Bits: Drilling Diameter: 5mm / 0.197"; Flute Length: 28mm / 1.1"; Overall Length: 50mm / 1.97"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Extra-length, for deeper holes than Jobber length

130-degree point angle, for centering and to reduce pressure on cutting edges

High-speed steel (HSS) containing cobalt is a combination of toughness and hardness, for use on drilling into hard substances

Twist Drill Bits: Drilling Diameter: 1.7mm / 0.067"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Twist Drill Bits: Drilling Diameter: 3.3mm / 0.13"; Flute Length: 25mm / 0.98"; Overall Length: 42mm / 1.65"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Twist Drill Bits: Drilling Diameter: 2.6mm / 0.102"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.

Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.

Drill Bits: Cutting edge diameter: 2.8mm / 0.11"; cutting edge length: 55mm / 2.17"; shank diameter: 2.8mm / 0.11"; overall length: 100mm / 3.94"; cutting hardness (max.): HRC55. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Suitable for drilling materials below HRC55, such as stainless steel, alloy steel, tool steel, carbon steel, aluminum alloy, etc.. Used on machining centers, drilling machines, CNC lathes, CNC engraving and milling machines.

Carbide Material: Made of super fine grain carbide, it has high hardness (HRC92-94), wear resistance, heat resistance, and high bending strength. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.

Drill Bits: Cutting edge diameter: 2.4mm / 0.094"; cutting edge length: 60mm / 2.36"; shank diameter: 2.4mm / 0.094"; overall length: 100mm / 3.94"; cutting hardness (max.): HRC55. Sharp cutting edge provides smooth cutting and no glitches.

Wide Applications: Suitable for drilling materials below HRC55, such as stainless steel, alloy steel, tool steel, carbon steel, aluminum alloy, etc.. Used on machining centers, drilling machines, CNC lathes, CNC engraving and milling machines.

Carbide Material: Made of super fine grain carbide, it has high hardness (HRC92-94), wear resistance, heat resistance, and high bending strength. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

⚙Short Bit Set: This short bit set includes 5 pieces 5 size short bits, size s are 3/32 inch, 1/8 inch, 3/16 inch, 1/4 inch , 5/16 inch which meet your different drilling requirement. Easy to use light, compact and durable.

🔩Tip Design: The 135 degree standard tip design not only promises strong sharpness, but also prevents slippage and makes drilling stable and precise. Smaller bits are much more rigid, and will not flex like long bits.

🛠Quick Change Hex Shank: Each 1/4 inch hex shank is compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.