Best Copper Twist Drill Bits in 2026

【Capability & Durability】 HSS construction enables drill bits of this impact drill bit set with high capability, durability and functional ability. The premium titanium finish improves surface hardness, rust and wear resistance. Durable titanium hex drill bit set that penetrates hard materials with ease and lasts a long time.

【Withstand Heavy Impact & Quick Change】 The 1/4 inch hex shank enables the titanium drill bit set to handle high torque transmissions and heavy impact. A dependable impact drill bit set to get the job done. These hex drill bits fit into quick change chuck system for rapid change of cutting tools.

【Fast Drilling】 The 135-degree split point tip prevents the titanium impact drill bit from walking for easy starts on contact. Precision fully ground parabolic flute form helps hex drill bits produce rapid chip removal to decrease friction and heat build-up. Durable impact hex shank drill bit set with sharp cutting edges that cut like butter on wood/metal.

COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.

SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

3PC SET - The set includes 3pcs of 10mm diameter fractional inch size M35 grade cobalt steel twist drill bits. Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box.

FEATURES: 5pcs step drill bits enable 50 sizes - each step drill bit can drill several bore diameters. It's can work as 50pcs twist drill bits. You don't have to replace drill bit constantly for different bore sizes.

TITANIUM HIGH-SPEED STEEL: classic and sturdy high-speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of the metal sheet.

DOUBLE CUTTING BLADES & THREE-SIDED SHANK - Double cutting blades and X-type openings design ensure a faster and smoother cutting; 3-sided shank design prevents slip in drill chuck can cut through the wood, sheet metal, steel, and other surfaces.

Durable Construction - HSS material with black and gold coating increases lubricity, provides corrosion protection, and increases durability. Ensures longer tool life in multiple working conditions. Tapered web provides strength, durability and reduces breakage.

No Center Punch is Needed - 135° split point design for fast penetration with less pressure. Twist drill bit kit will not "Walk" or "Wander".

Parabolic Flute - Parabolic flute for better chip removal and reduced heat build-up.

Specification - 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank.

Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness.

Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Accuracy & Longevity - 135 degree split point starts drilling immediately requires less force and eliminates “walking” across the working surface. Tapered web provides strength, durability, and reduces breakage.

Three-Flat Design - Three flats on shank eliminate bit spinning in chuck. Our proprietary parabolic flute design brings optimal chip removal which reduces heat build-up.

Wide Range of Uses - Drill bits are built for general purpose applications, such as steel/copper/aluminum/zinc alloy/wood/plastics. Also, it's ideal for DIY projects and home maintenance. Durable and reliable quality.

20PCS,9/32" Inch HSS Jobber Cobalt Twist Drill Bits,ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc.

High Quality Material- High Speed Steel Cobalt -M 35 Cobalt Steel Best Material.

High Efficiency In Drilling Metals, and Stainless Steel.

【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses

【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster

【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 3/16 inch, Total length 3-1/2 inch, Working length 2-5/16 inch.

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4 inch, Working length 2-3/4 inch.

Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials

Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish

135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling

【Package & Size】 Size range: 1/16"x3, 5/64"x2, 3/32"x2, 7/64"x2, 1/8“x2, 9/64", 5/32"x2, 11/64", 3/16"x2, 13/64, 7/32, 15/64, 1/4, 5/16, 3/8, 1/2. Most frequently used size range with extra small size drill bits. All drill bits are kept in a strong and professional plastic case with indexed holder which is convenient for storage and pick-up.

【Wide Applications】 Jefe Hex drill bit sets are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Working materials include steel, copper, aluminum, zinc alloy, cast iron, wood and plastics.

【HSS Titanium Coating】High speed steel (HSS) with titanium coating gives Jefe Hex drill bits great durability and prolongs 3 times longer life than drill bits without coating.

🔨【Various Sizes】 13 sets of drill bits include 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", can meet more needs.

🔨【M35 Cobalt Drill Bit】 The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc. Note that it is not applicable to quenched bolts.

🔨【Quick and Efficient】 The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal.

Strength & Hardness - Tapered web enhances strength and durability. Titanium coating adds lubricity and protection from abrasion. Increases drill bit lifetime. Jefe Hex drill bit with enhanced parabolic flutes promotes chip removal which decreases friction and heat. The tapered web adds strength.

Hex Shank - Quick change hex shank fits easily into all power tools and Impact drivers. Solid bonding technology manufacturing eliminates radial runout and improves concentrically. High torque, impact-rated accuracy.

Easy Cut Point - The 135° easy cut split point ensures a precision start, eliminates walking on the work surface which provides clean, accurate holes. No need for a center punch. More effective for drilling on curved surfaces.

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.

FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

Features: Cutting Edge Diameter : 12.5mm / 0.49"; Shank Diameter : 12.5mm / 0.49"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand

High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.

Features: Cutting Edge Diameter : 8mm / 0.31"; Shank Diameter : 8mm / 0.31"; Cutting Edge Length: 75mm / 2.95"; Total Length : 115mm / 0.59"; Cutting Direction: Right Hand

High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 5/32 inch, Total length 3-1/8 inch, Working length 2 inch.

Cobalt Steel - Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit.

HSS Titanium Coating - Classic HSS Construction With Titanium Coating For Capability And Durability. The Cutting Edge Is Hardened And Honed For Sharpness.

Flutes Form - 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean.

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.

FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

SELF CENTERING - The 135° quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

【Premium HSS Titanium Coating】High speed steel (HSS) with titanium coating gives Jefe Hex drill bit great durability and prolongs 3 times longer life than drill bits without coating.

【Easy Cut Split Point】Jefe Hex Easy Cut Point design makes drilling easy with less pressure and prevents drill bit walking on the working surface. Fully ground modified parabolic flute design clears chips quickly, decreases friction and heat damage. Tapered web provides durability and reduces breakage.

【Quick Change】1/4" (6.4mm) hex shank fits into standard power tools and impact drivers. Jefe Hex drill bit’s solid bonding technology manufacturing eliminates radial runout and improves concentricity. High torque, impact-rated accuracy.

These carbide end mills are Made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.

Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.

Coated with titanium Improves the speed and feed rate of the tool, and also Improve the surface wear resistance.

135°Split point, straight shank, sharp spiral groove, coffee bronze coating.

3/16" inch Diameter 4.8mm for reference. Real exact size is 4.76mm. 3/16" equals to 4.7625mm, this drill bit diameter is almost real 3/16".

Flute length 2 1/16"(52mm), total length 3 7/16"(86mm).

★【Premium Bright Finish 2/Pack】 multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc.

★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!

★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily.

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8"

[M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.

[Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.

[Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.

Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.Size:13/64inch,Total lengh:3.34inch.Work lengh:1.96inch

The blades are very sharp and they drill into metal fast.Including Steels,Cast Iron ,Copper,Galvanized Pipe,Aluminum Alloy,Wood, Plastic and Other Hard Metals.If you need to drill hard metal, Highly recommended use drilling press contral the RPM.Not for Glass or Ceramic Materials.

Full-grinding Nitriding,Good Wear resistance,Durable,Spiral groove design, well chip removal performance.135 Tip & Twist Design,Increases cutting speed with self-centering and prevents walking.

SPLIT POINT - 135-degree self-centering split pointed tip combines active cutting and perfect centering without wandering. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm.

PRECISION GROUND - These bits are fully ground so that its cutting diameter is seriously accurate. The lifespan is prolonged in comparison to non-ground alternatives(roll forged bits). A smooth bit surface allows for nice clean holes.

HIGH SPEED STEEL - Made of high-quality high-speed steel for durability and cutting efficiency.

Feature: High-Speed tool steel clear chips and particles faster, make drilling precise and faster. Fit to electric power drill drivers and start repairs, installation, and renovation in metal, wood, and plastics.

Sharp & Wear-Resistant Material: These drill bits are made of 4241 high speed steel with titanium coating for proven capability and durability.

WIDE APPLICATION: drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic