Best Sipery in 2026

Specification - 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank.

Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness.

Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits.

20Pcs Strap U Bracket M50, fit for 50mm/2" pipe diameter, about 0.6mm thickness, total Size 3.7x0.7x2inch. (HERE is NOT Including Screws).

Material - Two hole strap bracket made of 304 Stainless Steel, 0.6mm thickness strap, sturdy and durable, resistant to rust and corrosion.

Reinforcing Rib Design - the middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using.

Specification - 1Pcs Hole Saw 3 inch, 75mm/3inch cutting hole, cutting depth is no more than 30mm/1.2inch, is designed for wood / plastic cutting.

Material - Hole Saw drill bit is made of carbon steel alloy & M42 bi-metal steel, heavy duty, durable and rust-proof, built tough for repeat use.

Feature - Wood hole saw with non-binding clean edge design, cutting more smooth and easy, handy for working on wood and plastic.

Package - 10Pcs Magentic Philips Screwdriver Bits Double Ended, Bit Type: Phillips PH2, Shank Size: 1/4inch, Total Length: 65mm / 2.56inch.

Material - Phillips screwdriver drill bit made of S2 alloy steel for maximum durability, This is a commonly used material in hardware with high hardness.

Magnetic & Double Ended - Double end phillips bit are with magnetic design, Double-ended for extra versatility.

2pcs Plunger Door Lock with Keys, BUT BUT EACH LOCK'S KEY IS DIFFERENT. Not including Screw, Rectangle plate, cylinder rim lock.

Cylinder Size: 23 x 19mm / 0.91 inch x 0.75 inch (L*D); Durable Material, Zinc alloy and chrome finished will resist wear and rust over time.

Showcase locks plunger is Installed on the single door, such as the glass cabinet, glass shelf or other glass furnitures. The install screws are NOT included here, is easy to install.

Specification - 2Pcs 4 inch Phillips Head Screwdriver #2, Philips head diameter 6mm, Shaft length 100mm 4 inch, Grip Length 4.3 inch.

Material - This Philips Screwdriver made of chrome vanadium steel and rubber, Chrome vanadium steel with corrosion resistant satin finish, smooth feel and corrosion resistance.

Grip Handle - Grip Phillips Screwdriver with Ergonomic non slip rubber handle improved comfortable hand feeling and control.

Specification - 2Pcs Phillips Head Screwdriver #2, Shaft length 8 inch, Grip Length 4.3 inch.

Material - This Philips Screwdriver made of chrome vanadium steel and rubber, Chrome vanadium steel with corrosion resistant satin finish, smooth feel and corrosion resistance.

Grip Handle - Grip Phillips Screwdriver with Ergonomic non slip rubber handle improved comfortable hand feeling and control.

Specification - 1 set Door Lock Set, including 1pcs door rim lock, 5pcs keys, 1pcs lock cylinder and some installation accessories, Can suit both Left and Right hand door.

Material - Sipery Anti Theft Door Lock made of stainless steel, brass cylinder, silver tone and gold tone in color, which provide rust resistance and durable lifetime.

Anti-theft Lock Size - 120mm Body length 85mm width, with a 27.4mm dia cylinder, it fits for 35mm-45mm door thickness. Easy and flexible installation: screw or Weldable Steel Surface Mounting.

Specification - 8Pcs M8x60mm Expansion Bolts, M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm.

Material - Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion.

High Quality - Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance.

Quickly and easily change accessory bits on Dremel rotary tools without changing collets. Eliminate the collet and wrench when changing Dremel accessories

The steel 3-jaw chuck holds various accessories with 1/32 to 1/8” shank sizes

Ideal for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, and cut-off wheels

Versatile: This set includes a wide variety of both driver bits and drill bits as well as a selection of accessories to help assist in a number of drilling and fastening applications

Quality: The included driver bits feature designs to lessen damage to the screw head and provide better bit gripping Power; The split drill bit tips provide easy drilling starts and are ideal for a variety of applications such as wood, metal, masonry and more

Convenience: With such a wide variety of bits and accessory options, this set is deal for everyday tasks from the garage to the workshop to the home

Titanium Nitride Coated two flute spiral design provides longer life and better chip removal

Split point tip increases speed

Laser engraved numbers increases step visibility

HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.

Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.

Titanium Nitride Coated two flute spiral design provides longer life and better chip removal

Split point tip increases speed

Laser engraved numbers increases step visibility

Cut-off Wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel. Ideal for easily cutting or slotting bolts, screws or sheet metal, thin wood, ceramic and plastic.

The EZ456B includes 12 fiberglass-reinforced cut-off wheels designed to last 2X longer compared to the 426.

The EZ456B is designed with the patented EZ Lock system making accessory changes 6X faster than using a standard mandrel by eliminating the need for a screw and a screwdriver.

Speed Tip Reduces Walking

Ideal for drilling in metal, wood, and plastics

No spin shanks

Titanium Nitride Coated two flute spiral design provides longer life and better chip removal for the DEWALT drill bit set

Split point tip of the drill bit increases speed

Laser engraved numbers increases step visiblity

Speed Tip Reduces Walking

Ideal for drilling in metal, wood, and plastics

No spin shanks

Easy and simple use kit

The product is 1/4" Titanium Nitride drill bit, industrial grade steel

Easy to use

The product is manufactured in China

12 Volts Max cordless lithium drill

12V Max Lithium drill is 35 percent more compact than previous version

59 hand tools and accessories

Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel

Made from industrial grade High-Speed Steel for increased durability. 8% Cobalt alloy steel is heat and abrasion-resistant

135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface

The product is 7/32" Titanium Nitride Drill Bit, Industrial Grade Steel

Easy to use

The product is manufactured in China

The product is 9/64" Titanium Nitride Drill Bit, Industrial Grade Steel

Easy to use

The product is manufactured in United States

No skate tip – for clean and accurate starts

Titanium coating – generates less friction for 2x longer life

Three flat shank – promotes better grip on bits 3/16 in. And larger

Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)

Rigid, thick web design adds stability to bit in tough applications

Surface hardened to penetrate tough abrasive materials

135-degree split point tip of the drill bits for wood, metal or plastic is designed to help reduce walking

DEWALT drill bit set is made from High Speed Steel to be used in plastic, wood, and metal

Tapered web design for extreme durability and resisting breakage of the drill bits

Titanium Nitride coating for maximum life

Parabolic flute design improves chip ejection while drilling

Extra hard titanium coating for maximum service life

No-skate tip – for clean and accurate starts

Titanium coating – generates less friction for 2x longer life

Three-flat shank – promotes better grip on bits 3/16 in. And larger

Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)

Rigid, thick web design adds stability to bit in tough applications

Surface hardened to penetrate tough abrasive materials