Best Elkay Kitchen Sink Installation Parts in 2026

BRASS COVER - The cover of air activated switch button for food waste disposer is made of solid brass, with brushed gold finished. NOT matches Delta's champagne bronze. And the thread plug is plastic.

HIGH SAFETY - Compared to the traditional wall switch, garbage disposal air switch kit is a trend and safe choice by island installation. UR certified.

HIGH APPLICABILITY - US standards, kitchen sink air switch unit works with any brand of garbage disposals.

DIMENSIONS: 27-1/2" x 13-1/2" x 1-1/4"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

BRASS COVER - The cover of air activated switch button for food waste disposer is brass constructed, with matte black finished. And the thread plug is plastic.

HIGH APPLICABILITY - UL Certified, kitchen sink air switch kit works with any brand of garbage disposals(≤2HP).

HIGH SAFETY - US standards, compared to the traditional wall switch, garbage disposal air switch unit is a trend and safe choice by island installation. No power cord, No extra screws, Install without tools.

Stainless steel face and plastic body prevent rust.

Size: 1.77'' width x 0.75'' long nipple. Please kindly check its size before buying.

Thickness of sink should be LESS than 0.4 inch. (This is NOT long enough for granite counter tops.)

Universal accessory

Fits most double bowl sinks w/ rear drains

PVC feet elevate grid from surface

DURABLE CONSTRUCTION: Bottom sink grid is made from premium stainless steel material

HEAVY DUTY: Extra thick construction, sturdy wire frame, and rubber feet ensure protection against scratches

SCRATCH-FREE: Vinyl feet and side bumpers protect sink from scratches

Simple DIY replacement for a sink sprayer, soap dispenser or sink hole cover

Can rinse most standard drinkware including wine glasses, baby bottles, and travel cups

Minimum drinkware opening size is 1 in. in diameter and maximum drinkware opening size is 3.6 in. in diameter

Best way to repair an undermount sink --- A once-for-all effort for you because this product sets you free for good from having to frequently fix your falling sink. Enjoy your cooking without worrying about your sink.

Easy to install --- No need to remove the sink to install this product. All you need is an electric wrench and screws to fix the base of the bracket, and tighten the hexagon threaded rods until the entire bracket is firmly thrust against the edge of the sink. The attached manual gives detailed step-by-step descriptions.

Strong steel --- A perfect bracket for undermount single/double bowl sink. Even a double bowl sink fully loaded with water does not swing when supported with this bracket. Surface galvanization makes sure this bracket does not grow rust in the humid kitchen conditions and provides prolonged services to you.

HIGH VERSATILITY - Air Switch Button works with most of the brand/model of garbage disposal, perfectly well for ISE, Waste King, Moen, GE, Kitchen Aid, Whirlpool, Waste Maid, Emerson, Goplus, Frigidaire, Yescom, BECBAS and so on.

DURABLE MATERIAL - High-grade stainless steel and plastic, Durable, stylish and beautiful, buy it for quality, buy it for looks, buy it for kitchen fun, we sincerely invite you enjoy the kitchen together with our elegant design!

EASY TO INSTALL - Air Switch Button can be mounted easily to any Sink or Counter installation by drilling a hole between 1 1/4" and 1 3/4" . And 2-inch body fits stainless steel counter top.

Leak-proof cover: the hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

Easy to install: longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

Stainless steel material: filled the hole in the granite, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures, not a heavy metal but it works as

Material: our sink faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime.

Advantages: quick and easy installation without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak. Simple and generous design, make your kitchen look beautiful.

Size: our faucet hole cover is the standard size for most homes; This is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (This is not long enough for granite counter tops), please check the size before purchase.

Chrome finish to create a bright, highly reflective, cool grey metallic look

Extend the handle of your Moen tub/shower

For use with Moen PosiTemp Single-Handle Tub/Shower

IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.

Grid dimension: 29-5/8" X 14-7/8" for your sink bottom with Corner Radius 2"

Center Drain LOCATION

FITS STANDARD SIZES SINK: This BEHOK sink grid length 28-3/8", width 15-3/8", height 1", with rear drain corner diameter 5" for bottom of sink, fit sinks corner radius R1-1/2". Please notice your sink's size and drain location. (Note: Please measure the inner dimension of your sink. It's VERY IMPORTANT to measure the dimension of your sink bottom at 1 inch height, DON'T from the sink bottom directly.)

MULTI FUNCTION: This BEHOK sink grid can use on many purposes. You can use it as a drain rack, cooling rack, defrosting grid, drying grid, dishware drainer, etc.

HIGH-QUALITY STAINLESS STEEL: Made of food-grade 304 stainless steel, allowing direct contact with food. It’s durable, corrosion-resistant and rust-resistant. Attractive, stainless steel finish gives bottom grid a pristine look that complements all sink materials.

☑【RINSE RESIDUE QUICKLY】:The bottle washer features 9 high-pressure powerful water jets to thoroughly rinse residue in seconds. Gently press, clean as new! The sloped design of the cup washer base directs water to the kitchen sink, preventing standing water.

☑【WIDE APPLICATION】:The faucet glass rinser conveniently rinses virtually any drinkware that opening size is between 0.6 to 4.2 Inches in diameter. Such as wine glasses, champagne glass, baby bottles, travel cups, coffee mugs, latte cups, sports bottles,etc. Great for home kitchen, bar, cafe, resturant, hotel sink.

☑【DIY REPLACEMENT FOR】:The cup washer for sink is the simple DIY replacement parts for a soap dispenser, kitchen sprayer or sink hole cover. If there is no hole in your countertop, please make sure the mounting holes are in the correct position before installation (please refer to picture 7 for installation requirements).

Overall 9.625" X 13.125" X 0.625"

T-304 stainless steel

Includes plastic feet to protect sink surfaces

DIMENSIONS: 26-3/4" x 16-9/16" x 1-3/8"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

Outer Size - 3 3/8 inch in diameter. Splash guard perfect for ISE disposals and other 3 bolt mount disposer. NOTE: Please measure and confirm the outer diameter of your garbage disposer feed opening and select the correct outer diameter of the splash guard.

Why You Need Our Splash Guard - A splash guard can prevent the water and debris from splashing upward and reduce disposer noise. It can bring you a more pleasant and relaxing kitchen experience.

Premium Material - Adopt 100% high quality nitrile butadiene rubber with excellent oil resistance, high wear resistance, good heat resistance, strong adhesion. Material determines quality, quality determines reputation.

EFFORTLESSLY HOLDS UP YOUR SINK: Our sink clips are meant to hold up to 1000lbs to firmly clamp your Undermount Kitchen Sinks & Undermount Bathroom Sinks. (When using a set of 10.)

EASY INSTALLATION: No tools are required or special expertise are needed to install. Just four easy steps to get the job done. (Epoxy not included.)

ANTI-CORROSION COATING: Each sink clip is layered with our protective coating to ensure our quality will last.

Stainless steel: this faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime

Easy to install: just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak

For use in: faucet hole cover is standard size for most households; Please check its size before purchasing, this suitable for hole size between 1.1 to 1.7 inch, thickness of sink should be less than 0.25 inch

Brass construction is designed for durability

Standard kitchen sink size. Works with all kitchen sinks

Works with most insinkerator garbage disposals

Kitchen Sink Bottom Grid Dimension: 26 x 14 Inches.

Sink Protector: Soft Protective Bumpers Prevent Sink Surface Scratch.

Sink Rack for Bottom of Grid: Durable Stainless Steel Construction with Flawless Chrome-plated Finish.

EASY TO INSTALL - Install the sink support kit without removing other components of the sink. All you need is an electric tool and an Allen wrench to complete the installation.

SOLID CONSTRUCTION - Made of metal with a thickness of more than 1mm, strong and durable. Sink support surface is galvanized to ensure that it can be used for a long time in a humid environment like the kitchen.

ADJUSTABLE SUPPORT ROD - The support rod is rotatable and can be placed in any position as required. The sink is available even if it is a bit far from the wall.

INCLUDES EVERYTHING YOU NEED TO INSTALL A GARBAGE DISPOSAL

EASY INSTALL - Quick and Simple Installation.

DO IT YOURSELF - Fro Wall Water Supply and Drain

This kit provides universal installation

Allows for two Outlet Connection types: Center or End

Can be connected to the Wall or to the floor

Air gap cap with flange and plastic body included

1-3/4 in. cap diameter

2-3/4 in. cap height

Fits the Orwell (model # SK202-30AC) and David (model # SK203-31AC)

Protects your copper sinks finish and fragile dishes

Rubber feet provide added protection. Integral dish rack : No

MATERIAL - The kitchen faucet hole cover is made of stainless steel and ABS,which is durable

LEAK PROOF COVER - The sink hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

EASY TO INSTALL - Longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

[High Quality]- AA Faucet high quality bar sink drain made from stainless steel construction which is built to last for commercial usage.

[Perfect For Bar Sink]- 3-¼” Pipe Length. Perfect for bar and prep sinks for preventing unwanted debris and foreign objects from slipping down the drain.

[Thread Size]- 1” Nominal Pipe Size (ID) Inner Diameter, 1” NPS Thread.

14 extra long screws and clips for deep installations

For top mount installation of U-channel bracket models

For countertops up to 1-1/2" thick