Best Lachoi Lab Centrifuges in 2026

Time rang:0~60min or without limit

Maximum relative Centrifugal force: 1790×g

Electric current:AC110V 60 HZ

★[EFFICIENT MOTOR] The motor components have a high degree of tightness, the motors run stably, have zero error design, and are efficient and stable.

★[100% PURE COPPER COIL] Pure copper wire is fixed on the stator by winding, and the magnetic field is fixed during the stroke. The higher the copper content, the stronger the magnetic force, the stronger the rotor power, the higher the rotation speed, and the greater the centrifugal force.

★[RUNNING SMOOTHLY] The motor and the base plate are connected by a damping column. With integrated circuit, the motor rotor runs smoothly, which can avoid motor vibration and is firm and stable.

Time rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6

Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.

Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower speed centrifugal machine with the maximum speed 4000r/min and be equipped with/without timer. It mainly be used for the appraisal radioactivity and separate cell or particle.

PARAMETER- Maximum Speed: 4000rpm; Capacity: 20ml×12; Maximum Centrifugal Force: 2325xg; Timing Range: 0-120min; Power: 40W; Power Supply: 110V 60 HZ; Dimensions: 37×34×32cm

TIMING FUNCTION- With 0-120min timer, you are able to set the working time with the range of 0-120 min or keep the machine working continuously according to your requirements.

SPEED CONTROL- The centrifuge machine has a 0-4000rpm speed regulation. The value on the panel is clear, and the whole operation is very simple.（Note: Speed adjustment needs to be gradually adjusted from low speed to 4000rpm.)

[Fixed-angle Rotor & 6 Tubes]: 9 5/8" x 9 5/8" x 9 1/16" Electric centrifuge includes fixed-angle rotor for providing 1790xg relative centrifugal force and shortening centrifugation time to separate liquid from solid particles or liquid mixture of different density in medical & chemical experiments; 6pcs centrifuge tubes for offering 20ml capacity per tube

[Speed Adjustment & Time Setting]: Equipped with 2 rotary knobs for adjusting speed and setting time, provide maximum rotate speed up to 4000r/min and timing range up to 60min for meeting your different needs

[Easy to Use]: 2 Knobs with scales on operation panel for easily adjusting speed & time; Just insert the tubes to the holes of the rotor symmetrically, then plug in power and choose the proper speed and time to start the centrifugation

【Lab centrifuges】DOLFINIE 800mini low speed benchtop centrifuge has been designed for the centrifugal separation of human blood or urine samples. Please do not use materials with a density greater than 1.2g/cm, as this unit is not intended to centrifuge very dense materials.

【Patent design】The built-in patented centrifugal device ensures the smooth and steady spinning of the rotor. Selected premium motor and suction cups make spinning steady and quiet.

【Safety operation】UL listed power plug (110V/60Hz) and certificated motor ensure the safe use of operators and samples. Operator should be trained before using the centrifuge, or use the instrument under the guidance of professionals. Please read through the enclosed manual prior to operation.

Digital bench-top centrifuge for up to 6 of 15 ml tubes (do not order this item for uses with other sizes of tubes if you do not know whether it fits. We have a similar product with adapters for smaller tubes).

LCD display showing time (20sec-99min) and speed (100-5000rpm, up to 3074xg). Note: The actual speed is the displayed speed times 10 as it is shown on the upper-right corner of the panel.

Safety lid-lock prevent opening the centrifuge lid until the rotor has stopped spinning, Automatic release the lid when operation has stopped to save processing time

🎣【Durable Material】The high quality ABS engineering plastic centrifugal turntable to ensure that the centrifuge tube is not easily damaged, you can use it many times, and you need not worry it will be broken after using 1-2 times, it is suitable for tubes less than 10ml, like 5mL, 6mL, 8.5mL and 10mL. Its stepping is 5min.

🎣【Detailed Specifications】The 900-2 speed of centrifugal machine has 4000rpm/min, and there are beep reminder if it more than 60 minutes. the portable benchtop centrifuge only 1.7KG, Maximum centrifugal force is 1685xg, speed, centrifugal force and time on the lab centrifuge, the parameters can be modified during operation to achieve a satisfactory centrifugal effect.

🎣【Low Speed Regulation】The centrifuge machine has a 0-4000rpm speed regulation. there are two Spin buttons to control the time and speed, the value on the panel is clear.（Note: Speed adjustment needs to be gradually adjusted from low speed to 4000rpm.)

Easy to Operate - There are two rotating knob on the control panel, which can help you to control time and speed conveniently. You can set the time and speed as you want by controlling the knobs.

Fixed-angle Rotor - The fixed-angle design of our centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time.

Durable Centrifuge - High quality making, can used for a long time, very professional machine; Note:The up cover may not completely cover the open part.

【High Speed Mini Lab Centrifuge】 Fixed speed of 5400rpm and a MAX. RCF of 2000×g which is suitable for most experimental needs. With a powerful brushless motor and 12 non-slip foot pads, low noise is less than 50dB when working, let you concentrate more on your work.

【Operation Safety】 Our mini centrifuge with lid protection. Turn on the switch, close the lid and it will work automatically. When the lid is opened on a running machine, the rotor will stop running. Maximum protection for the user and the experimental material.

【2 Replaceable Rotors】 This centrifuge machine equipped with 2 interchangeable rotors, circular rotor for 6×0.2/0.5/1.5/2ml tube, strip rotor for 2 x 0.2mL PCR 8-strip. Please note that for best experimental results, the samples should be placed in the rotor in equal numbers and symmetrically. If there is only one sample, please add a tube of clean water to achieve symmetry.

The LCD display has the ability to change between an RPM and RCF setting

A separate short spin button is available for convenient and quick spins

Digital bench-top centrifuge for up to 6 of 15 ml tubes (do not order this item for uses with other sizes of tubes if you do not know whether it fits)

Easy to Operate: There are two rotating knob on the control panel, which can help you to control time and speed conveniently. You can set the time and speed as you want by controlling the knobs

Multiple Uses: This Centrifuge Machine is a good choice for separating the liquid from solid particles or other liquid mixture of different density. It can be widely used in various fields like biology, medicine, chemistry, life science, etc

Fixed-angle Rotor and Multiple Holes： The fixed-angle design of our centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time. And there are multiple holes for you to choose

[SPEED & TIME ADJUSTABLE] -- Two rotary switches to control speed and time, the speed range is 0-3500r/min; the time range is 0-60min.

[20MLx6 ROTORS] -- The tubes need to be inserted into the machine symmetrically, it is not allowed to operate the machine asymmetrically. If the sample is singular, please add a tube of clean water to achieve symmetrical operation.

[TRANSPARENT LID] -- With transparent cover, you can observe the operation of samples directly, more intuitive and convenient. 【TIPS】 If the lid is a bit loud, it is recommended that you can wrap a piece of tape around the cover to increase stability, which helps a lot.

❤【POWERFUL CENTRIFUGAL】Powerful brushless motor with high performance.Wide range electronic speed control 500-4000 rpm, maximum speed up to 4000RPM, maximum relative centrifugal force 2220 xg. Widely used in laboratory, medical, clinical and industrial applications.

❤【EASY TO USE】LCD digital display can intuitively adjust the experiment time and speed. Timing range 10s-99min59s, electronic speed control 500-4000r/ min. Instantaneous centrifugation function, press the shot button, the centrifuge starts running, release the button, stop running.

❤【ALUMINUM ALLOY ROTOR】LABFISH low-speed centrifuge with built-in fixed-angle rotor can accommodate 12*10ml centrifuge tubes or 12*5ml/10ml collection tubes with low-speed brake for fast and effective separation.

☑PRODUCT SPECIFICATIONS--The mini centrifuge machine has a fixed speed of 10000RPM and a MAX. RCF of 5600xg which can improve work efficiency. With a DC permanent magnet motor and non-slip foot pad, when the micro centrifuge is working,the noise is relatively low.

☑2 REPLACEABLE ROTORS--The microcentrifuge is equipped with 2 replaceable rotors, circular rotor for 8×0.2/0.5/1.5/2ml tube, strip rotor for 2×8×0.2ml tube.Note:Please put the tube containing the same amount of sample into the rotor symmetrically.If the sample is singular,please add a tube of clean water to achieve symmetrical operation.

☑SAFETY PROTECTION--PCR centrifuge machine adopts a cover protection. When the running machine's lid is opened, the rotor will stop. After closing,the mini portable desktop centrifuge will work again.

Digital plasma centrifuge for up to 6 of 15ml tubes .Speed can be adjusted from 500-5000rpm,max relative centrifuge force is 3074xg.Timing Range is 10s~99min59. The LCD display with ability to change between RPM and RCF can show time and speed at real-time, more conducive to the observation of samples.

This centrifugadora de plasma is with short time centrifugal function. Short spinning is possible as long as the SHORT button is held down.No need to set the speed and time . With Intelligent electronic lock automatically open the cover after the machine runs, without manual pressing.

The aluminum alloy rotor of this prp centrifuge machine is calculated as an optimized design,it has the advantages of light weight and high speed .Hollow soundproof cover,fully absorb noisy,quite operation. Perspective window can directly observe the operation; Powerful sucker hold the table firmly,make this low speed laboratory centrifuge run smoothly.

6 x 50mL / 6 x 15mL / 2 x 50mL + 2 x 15mL rotor included, rotor speed can be set and displayed in rpm or G-force, operation can be timed from 30 seconds to 99 minutes or continuous running.

Timer commences once the set speed is reached, so the separation time is more accurate, gentle braking at low speeds with efficient separation, quick spins are possible by pressing and holding PULSE key.

Lid with electric lock and automatic release function saves processing time and prevents samples overheating, easy operation with intuitive menu and easy-to-read backlit LCD processing display and sound alert, automatic self-diagnosis on startup showing accumulative running time and last running parameters.

【Adjustable Switches】The two knobs can respectively control the time and speed adjustment. Speed range is 1500~ 12000 rpm . Time arrange is 0-60 min, you can adjust them according to your preference.

【Specification】Centrifugal capacity: 24 Tubes X 75 mm(length) (Glass Capillary Dia: 1.5mm); Maximum relative centrifugal force: 15300g; Turntable form: horizontal; Start-up time: 1 min; Braking time: 2min.

【Brushless Motor】Machine power: 100W; The brushless motor is maintenance-free and more convenient to use.[It is recommended to pause for 15 minutes after every 3 minutes of use before using the machine to avoid high rotor temperature.]

LCD Screen: Equipped with LCD Screen, the speed and time control of Centrifuge Machine for Plasma PRP is more accurate.

Basic Parameters: Speed: 300-4000rpm; Timing: 0-100min (Stepping 1min); Max Relative Centrifugal Force: 1953xg; Motor Power: 50W

Large Capacity: The 6*15ml PRP Centrifuge Machine is suitable for 15ml max, such as 5ml, 10ml and 15ml.

✴【Excellent Quality】: This centrifuge is made of high-quality metal materials, surface powder spraying treatment, smooth surface, rust-proof, easy to clean, strong and durable, can accommodate 6 20 ml test tubes at the same time.

✴【High Efficiency】: This centrifuge uses pure copper motor, the maximum speed can be up to 4000 rpm, and can be adjusted at will. It has timing function (1-60min) and is convenient for qualitative and quantitative experiments.

✴【Good Operation】: The centrifuge is compact in design, light in weight, small in size, simple in operation and easy to carry. It runs smoothly and quietly without noise. Anti-skid footpad, eliminating excessive vibration. The best choice of centrifugal separation sample.

Single speed hand crank centrifuge machine consisting of die casted parts, a steel pinion, and worm drive.

Features a removable crank handle.

Includes 4 polythene tubes.

【2 Replaceable Rotors】2 interchangeable centrifuge rotors; 1.5/2mL x 6 and PCR 8 x 2(fit for 0.2/0.5/1.5/2ml microcentrifuge tubes x 6 and strip rotor for 0.2ml tube).

【Quite Running】Mini centrifuge equipped with a powerful brushless motor; low noise:≤50dB; fixed speed:5400rpm.

【Easy to Use】Click-on design allows for very easy rotor change without tools for the mini benchtop centrifuge.

High quality maintenance-free brushless motor

LCD display & control of time and speed

Adjustable speed: 300r/min to 5000r/min | 500r/min to 8500r/min | 500r/min to 12000r/min

【Adjustable time and speed】: The two rotary switches of the lab benchtop centrifuge control the speed and time respectively, the speed range is 0-4000r/min; the time range is 0-60 minutes. Maximum relative centrifugal force: 1790×g. Electric current: AC110V 60 HZ.

【High Efficiency 20MLx6 Rotor】: This laboratory centrifuge provides 6 tubes, each tube has a centrifugation capacity of 20ml, which is benefit for your workflow efficiency. Note that the tube needs to be inserted into the machine symmetrically, asymmetrical operation of the machine is not allowed. If the sample is single, a tube of clean water can be added to achieve symmetrical operation.

【Wide Range Of Application】: The desktop centrifuges machines are widely used in laboratories or production departments such as chemistry. This laboratory benchtop centrifuge is a great companion in the movement. Also great for making small batch cocktails at home! Suitable for dehydration of algae samples, PRP, beauty fields, etc. It mainly be used for the appraisal radioactivity and separate cell or particle.

8 position 1.5/2 ml tube rotor and 4 position, 8 strip PCR

6,000 rpm/2,000 g centrifugal force

Ultra quiet motor

7000RPM Fixed Speed: Equipped with an effective motor that delivers a powerful rotating action, this centrifuge machine spins at a fixed speed of 7000RPM while its maximum RCF can reach up to 3286xg.

Large Rotor Capacity: Comes with 12 0.2mL adapters and 12 0.5mL adapters, the 2 in 1 multifunctional rotor in this lab centrifuge machine can house centrifuge tubes of different sizes: 0.2mL, 0.5mL, 1.5mL, and 2mL,meeting most of your experimental needs.Total capacity is 0.2/0.5/1.5/2mL x 12,and 0.2mL x 8 x 4 is available too with our 2 in 1 rotor.

Smooth & Stable Operation: This electric centrifuge machine is equipped with an efficient motor, achieving a smooth operation with low noise (<47dB(A)) and low vibration. Plus, our mini centrifuge machine is designed with four non-slip foot pads, ensure it stands firmly in place during the operation.

Multi speed, Mini-centrifuge with dual voltage

Perfect for spinning small samples

Great for mobile laboratories

【High Speed Lab Mini Centrifuge】The mini centrifuge equipped with high power motor for quick roating speed can reach 4000RPM while relative centrifugal force is about 940kg, which can meet most of your experimental requirements. The right size does not occupy the countertop sapce. Beautiful appearance is simple and generous.

【Semi-automatic lid opening&Self-locking function】 The centrifuge will start and stop with closing/opening of the protective lid，easy to operate. After the independent opening button is pressed, the centrifuge machine will stopp in 3 seconds, the protective cover slowly rise up. Moreover, after the rotor and the motor are connected and fixed, the centrifuge rotor will be fixed with a self-locking buckle, more safety.

【2 Interchangeable Centrifuge Rotors】The prp centrifuge machine is equipped with 2 interchangeable rotors. Round centrifuge rotor for 8*2ml centrifuge tubes, angular rotor adapters can suit for 8*0.2ml/0.4ml/0.5ml centrifuges test tubes. PCR strip rotor for 4*8*0.2ml connecting centrifuge tubes or 32*0.2ml single tubes. Note:Please put the tube containing of same amount sample into the rotor symmetrically.

【Parameter】Voltage:AC110V 60 HZ; Power:25W; Max Speed: 4000r/min; Time rang:0~60min or without limit; Maximum relative Centrifugal force: 1790×g; Capacity:20ml×6.

【6 Tubes More Efficency】The centrifuge can hold 20mlX6 tubes one time. But the tubes need to be inserted into the machine symmetrically, it is not allowed to operate the machine asymmetrically. 

【Timing and Speed】Electric Laboratory Centrifuge Machine with two knobsl to control speed and time. The lower speed centrifugal machine with the maximum speed 4000r/min.

JOANLAB MC serice is perfect benchtop microcentrifuge for your lab to do quick spin downs .With over temperature protection, when the temperature in the centrifugal chamber is too high during operation, the centrifuge machine will automatically shut down and open the lid, the buzzer will alarm for 5 seconds,and the SAFE flashes. Avoid damage to temperature-sensitive experimental samples due to excessive temperature to meet your diverse experimental needs.

Program Memory Function,The speed and time of model MC-12PRO required by experiments can be freely set,and the program can be stored,for direct use in the future.No need to reset, more conveniently;

Equipmented with 3 in 1 Rotor , it do not need to change rotor, it is time-saving. This lab minicentriuge accept 12-position 1.5/2 mL tube as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes. With the included adapters, 0.2 mL and 0.5 mL strip tubes can also be accommodated in the 12 position tube rotor, further increasing its versatility.