Best Topqsc in 2026

Easy to Operate - There are two rotating knob on the control panel, which can help you to control time and speed conveniently. You can set the time and speed as you want by controlling the knobs.

Fixed-angle Rotor - The fixed-angle design of our centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time.

Durable Centrifuge - High quality making, can used for a long time, very professional machine; Note:The up cover may not completely cover the open part.

[Good performance]: This knitting gun has a very wide range of applications. It can be used for weaving different types of carpets. The motor speed can reach 2400RPM or higher for high-speed tufting, which improves work efficiency. At the same time, it is quieter and will not make a loud noise and almost all yarns are available, it is advanced special equipment that can greatly improve work efficiency in modern production.

[Meet various needs] The speed of this tufting gun studio can reach 5-40 stitches per second, and the adjustable carpet height is 7-21mm, which increases the production efficiency by 80-100 times and saves more than manual knitting Manpower and time.

[Safety protection]: The tufting gun has over-voltage, over-current, and short-circuits protection functions, which can avoid accidents during use

❤ Good choice for the both indoor and outdoor DIY enthusiasts, portable size enable users easy to carry.If there is no detailed manual arrived with it, just let us resend you a mannual file.

❤High quality aluminum alloy base and pure steel structure drill chuck.Multiple accessories for operating.

❤7power levels adapter enable you to adjust the rotating speed to meet different cutting speed.It is easy and safe to operate.If the mannual comes with products not readable, please let us send you a more detailed mannual picture.

[Combination of traditional and modern technology] The cupping massager adds modern technology to the traditional cupping device, adding vibrating sticks and red light physiotherapy functions, which can absorb and release rhythmically. Compared with the traditional cupping device, no open flame is needed, it is convenient to carry and clean, and it can massage better and bring a more comfortable experience.

[Multiple modes, easy to operate] The product has three negative pressure modes and three vibration modes. Different combinations of modes can give you different massage experiences. Left click to start and select negative pressure mode, right click to select vibration mode, its operation is so simple! You can choose the most suitable mode according to your own situation!

[Red light therapy] Red light therapy can promote blood circulation, relieve fatigue and pain, enhance immunity and metabolism, and bring you more relaxation and pleasure.

🧪 TUBE MATERIAL: These 15mL centrifuge tubes are made in high purity PP Material. They are designed to have longer length screw caps with sealing rings to prevent leakage. Pack of 50.

🧪 EASY TO DISTINGUISH: Plastic centrifuge tubes also include a convenient white writing patch for easy marking and identification. The patches are nice for labeling. And the test clear conical tubes with screw caps.

🧪 EASY TO READ: Black graduations of plastic centrifuge tubes are accurate to ±2%, 1mL increments (total 15mL). So these lab centrifuge tubes are better for science experiments.

Time rang:0~60min or without limit

Maximum relative Centrifugal force: 1790×g

Electric current:AC110V 60 HZ

Mini 1.5ml Conical Tubes can be used for many things other than tests , clear graduations on the side and a good seal . ideal for keeping small items clean and dry like tablets ,lotions, powders or creams

Plastic centrifuge tubes are general used in fields of biochemistry and molecular biology, such as separation and preparation of various biological samples.

No leaking: Our plastic centrifuge tubes are general used in fields of biochemistry and molecular biology，such as separation and preparation of various biological samples.

✅HIGH QUALITY MATERIAL - 50mL conical centrifuge tubes with High purity PP Material and Max.RCF: 9,400, it can Autoclavable at 121℃ and freezable to -80℃.

✅LEAK-PROOF - 50mL centrifuge tubes have longer length screw caps, which is used to prevent sample leakage and it smooth, flat inner surface, no residual solution.

✅STERILIZED - Centrifuge tubes 50mL is EO sterilized, non- pyrogenic, DNase/RNase free.

Screw cap with tight sealing

Screw cap with tight sealing

External graduations with marking area

Material: PP ( Polypropylene ).

Capacity: 50 ML, Graduated every 5ml & 2.5ml.

Dimension: 1.0 x 4.5inch / 25 x 114mm(D*L).

★[EFFICIENT MOTOR] The motor components have a high degree of tightness, the motors run stably, have zero error design, and are efficient and stable.

★[100% PURE COPPER COIL] Pure copper wire is fixed on the stator by winding, and the magnetic field is fixed during the stroke. The higher the copper content, the stronger the magnetic force, the stronger the rotor power, the higher the rotation speed, and the greater the centrifugal force.

★[RUNNING SMOOTHLY] The motor and the base plate are connected by a damping column. With integrated circuit, the motor rotor runs smoothly, which can avoid motor vibration and is firm and stable.

Time rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6

Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.

Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower speed centrifugal machine with the maximum speed 4000r/min and be equipped with/without timer. It mainly be used for the appraisal radioactivity and separate cell or particle.

PARAMETER- Maximum Speed: 4000rpm; Capacity: 20ml×12; Maximum Centrifugal Force: 2325xg; Timing Range: 0-120min; Power: 40W; Power Supply: 110V 60 HZ; Dimensions: 37×34×32cm

TIMING FUNCTION- With 0-120min timer, you are able to set the working time with the range of 0-120 min or keep the machine working continuously according to your requirements.

SPEED CONTROL- The centrifuge machine has a 0-4000rpm speed regulation. The value on the panel is clear, and the whole operation is very simple.（Note: Speed adjustment needs to be gradually adjusted from low speed to 4000rpm.)

[Fixed-angle Rotor & 6 Tubes]: 9 5/8" x 9 5/8" x 9 1/16" Electric centrifuge includes fixed-angle rotor for providing 1790xg relative centrifugal force and shortening centrifugation time to separate liquid from solid particles or liquid mixture of different density in medical & chemical experiments; 6pcs centrifuge tubes for offering 20ml capacity per tube

[Speed Adjustment & Time Setting]: Equipped with 2 rotary knobs for adjusting speed and setting time, provide maximum rotate speed up to 4000r/min and timing range up to 60min for meeting your different needs

[Easy to Use]: 2 Knobs with scales on operation panel for easily adjusting speed & time; Just insert the tubes to the holes of the rotor symmetrically, then plug in power and choose the proper speed and time to start the centrifugation

【Lab centrifuges】DOLFINIE 800mini low speed benchtop centrifuge has been designed for the centrifugal separation of human blood or urine samples. Please do not use materials with a density greater than 1.2g/cm, as this unit is not intended to centrifuge very dense materials.

【Patent design】The built-in patented centrifugal device ensures the smooth and steady spinning of the rotor. Selected premium motor and suction cups make spinning steady and quiet.

【Safety operation】UL listed power plug (110V/60Hz) and certificated motor ensure the safe use of operators and samples. Operator should be trained before using the centrifuge, or use the instrument under the guidance of professionals. Please read through the enclosed manual prior to operation.

Digital bench-top centrifuge for up to 6 of 15 ml tubes (do not order this item for uses with other sizes of tubes if you do not know whether it fits. We have a similar product with adapters for smaller tubes).

LCD display showing time (20sec-99min) and speed (100-5000rpm, up to 3074xg). Note: The actual speed is the displayed speed times 10 as it is shown on the upper-right corner of the panel.

Safety lid-lock prevent opening the centrifuge lid until the rotor has stopped spinning, Automatic release the lid when operation has stopped to save processing time

🎣【Durable Material】The high quality ABS engineering plastic centrifugal turntable to ensure that the centrifuge tube is not easily damaged, you can use it many times, and you need not worry it will be broken after using 1-2 times, it is suitable for tubes less than 10ml, like 5mL, 6mL, 8.5mL and 10mL. Its stepping is 5min.

🎣【Detailed Specifications】The 900-2 speed of centrifugal machine has 4000rpm/min, and there are beep reminder if it more than 60 minutes. the portable benchtop centrifuge only 1.7KG, Maximum centrifugal force is 1685xg, speed, centrifugal force and time on the lab centrifuge, the parameters can be modified during operation to achieve a satisfactory centrifugal effect.

🎣【Low Speed Regulation】The centrifuge machine has a 0-4000rpm speed regulation. there are two Spin buttons to control the time and speed, the value on the panel is clear.（Note: Speed adjustment needs to be gradually adjusted from low speed to 4000rpm.)

Easy to Operate - There are two rotating knob on the control panel, which can help you to control time and speed conveniently. You can set the time and speed as you want by controlling the knobs.

Fixed-angle Rotor - The fixed-angle design of our centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time.

Durable Centrifuge - High quality making, can used for a long time, very professional machine; Note:The up cover may not completely cover the open part.

Product Name :Centrifuge Tube

Material : Plastic

Capacity: 100ml

【High Speed Mini Lab Centrifuge】 Fixed speed of 5400rpm and a MAX. RCF of 2000×g which is suitable for most experimental needs. With a powerful brushless motor and 12 non-slip foot pads, low noise is less than 50dB when working, let you concentrate more on your work.

【Operation Safety】 Our mini centrifuge with lid protection. Turn on the switch, close the lid and it will work automatically. When the lid is opened on a running machine, the rotor will stop running. Maximum protection for the user and the experimental material.

【2 Replaceable Rotors】 This centrifuge machine equipped with 2 interchangeable rotors, circular rotor for 6×0.2/0.5/1.5/2ml tube, strip rotor for 2 x 0.2mL PCR 8-strip. Please note that for best experimental results, the samples should be placed in the rotor in equal numbers and symmetrically. If there is only one sample, please add a tube of clean water to achieve symmetry.

The LCD display has the ability to change between an RPM and RCF setting

A separate short spin button is available for convenient and quick spins

Digital bench-top centrifuge for up to 6 of 15 ml tubes (do not order this item for uses with other sizes of tubes if you do not know whether it fits)

Easy to Operate: There are two rotating knob on the control panel, which can help you to control time and speed conveniently. You can set the time and speed as you want by controlling the knobs

Multiple Uses: This Centrifuge Machine is a good choice for separating the liquid from solid particles or other liquid mixture of different density. It can be widely used in various fields like biology, medicine, chemistry, life science, etc

Fixed-angle Rotor and Multiple Holes： The fixed-angle design of our centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time. And there are multiple holes for you to choose

[SPEED & TIME ADJUSTABLE] -- Two rotary switches to control speed and time, the speed range is 0-3500r/min; the time range is 0-60min.

[20MLx6 ROTORS] -- The tubes need to be inserted into the machine symmetrically, it is not allowed to operate the machine asymmetrically. If the sample is singular, please add a tube of clean water to achieve symmetrical operation.

[TRANSPARENT LID] -- With transparent cover, you can observe the operation of samples directly, more intuitive and convenient. 【TIPS】 If the lid is a bit loud, it is recommended that you can wrap a piece of tape around the cover to increase stability, which helps a lot.

❤【POWERFUL CENTRIFUGAL】Powerful brushless motor with high performance.Wide range electronic speed control 500-4000 rpm, maximum speed up to 4000RPM, maximum relative centrifugal force 2220 xg. Widely used in laboratory, medical, clinical and industrial applications.

❤【EASY TO USE】LCD digital display can intuitively adjust the experiment time and speed. Timing range 10s-99min59s, electronic speed control 500-4000r/ min. Instantaneous centrifugation function, press the shot button, the centrifuge starts running, release the button, stop running.

❤【ALUMINUM ALLOY ROTOR】LABFISH low-speed centrifuge with built-in fixed-angle rotor can accommodate 12*10ml centrifuge tubes or 12*5ml/10ml collection tubes with low-speed brake for fast and effective separation.

【POWERFUL CENTRIFUGAL】Powerful brushless motor with high performance.Wide range electronic speed control 500-5000 rpm, maximum speed up to 5000RPM, maximum relative centrifugal force 3074 xg. Widely used in laboratory, medical, clinical and industrial applications.

【EASY TO USE】LCD digital display can intuitively adjust the experiment time and speed. Timing range 10s-99min59s, electronic speed control 500-5000r/ min. Instantaneous centrifugation function, press the shot button, the centrifuge starts running, release the button, stop running.

【ALUMINUM ALLOY ROTOR】LABFISH low-speed centrifuge with built-in fixed-angle rotor can accommodate 6*10ml/15ml centrifuge tubes (do not order this item for uses with other sizes of tubes if you do not know whether it fits. We have a similar product with adapters for smaller tubes) low-speed brake, fast and effective separation.

【LCD Screen】- Speed:0-3200r/min; Time:0-60min, which can be observed on the screen. It is convenient for you to rotate the button to adjust to the number you want. Real-time data can help you better detect samples!

【Capacity】- 10ml*6 rotors, which is suitable for 5ml/10ml tubes. [TIP] Please do not use other sizes of tubes if you are not sure whether it fits.

【Stable Running】- Compared with traditional products, the lid of this centrifuge is more stable and will not shake during operation, making a better separation effect for your prp samples!

☑PRODUCT SPECIFICATIONS--The mini centrifuge machine has a fixed speed of 10000RPM and a MAX. RCF of 5600xg which can improve work efficiency. With a DC permanent magnet motor and non-slip foot pad, when the micro centrifuge is working,the noise is relatively low.

☑2 REPLACEABLE ROTORS--The microcentrifuge is equipped with 2 replaceable rotors, circular rotor for 8×0.2/0.5/1.5/2ml tube, strip rotor for 2×8×0.2ml tube.Note:Please put the tube containing the same amount of sample into the rotor symmetrically.If the sample is singular,please add a tube of clean water to achieve symmetrical operation.

☑SAFETY PROTECTION--PCR centrifuge machine adopts a cover protection. When the running machine's lid is opened, the rotor will stop. After closing,the mini portable desktop centrifuge will work again.

☑PRODUCT SPECIFICATIONS--The shell of the low-speed centrifuge is made of high-strength ABS plastic, and the surface is frosted, which is not easy to age, and has a long service life. The upper cover is transparent, which is convenient to detect the rotation speed and the status of the sample.

☑VARIABLE SPEED&TIMING--Variable Speed: 100-4000RPM;RCF:1920×g;Timer Range: 1-999 mins. The lab benchtop centrifuges has a LCD display can read the data in time. With a DC permanent magnet motor and rubber suction cup, when the desk-top centrifuge is working,the noise is relatively low and the machine will not shake a lot.

☑ ROTORS--The electric centrifuge machine is equipped with 8-hole rotor for less than 10ml tube. Note: 1.Please put the tube containing the same amount of sample into the rotor symmetrically. 2.If the sample is singular,please add a tube of clean water to achieve symmetrical operation. 3.The actual centrifugal capacity should not exceed 80% of the test tube capacity.

☑VARIABLE SPEED&TIMING--Variable Speed: 1000RPM-10000RPM;Timer Range: 1min-1h59min;MAX.RCF：5600×g. The mini centrifuge machine has a LCD display can be fast to read. With a DC permanent magnet motor and non-slip foot pad, when the micro centrifuge is working,the noise is relatively low.

☑2 REPLACEABLE ROTORS--The microcentrifuge is equipped with 2 replaceable rotors, circular rotor for 8×0.2/0.5/1.5/2ml tube, strip rotor for 2×8×0.2ml tube.Note:Please put the tube containing the same amount of sample into the rotor symmetrically.If the sample is singular,please add a tube of clean water to achieve symmetrical operation.

☑SAFETY PROTECTION--PCR centrifuge machine adopts a cover protection. When the running machine's lid is opened, the rotor will stop. After closing,the mini portable desktop centrifuge will work again.

Single Speed: 10,000 rpm

Includes 6-place Micro Tube Rotor and 16-place PCR Strip Rotor

Small foot-print (Height: 6.2" and Width: 8.3")