Best Lab Friedrich Condensers in 2026

High Quality - Glass Condenser is made of high quality glass, which is clear and easy to wash.

Specification - Annealing point is 575℃, softening temperature is 820℃, jacket length is 200mm

Joint – It has the standard 24/40 joint.

Graham condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Graham condenser; 24/40 joint on the top and bottom

Made of high quality glass

Allihn condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Allihn condenser; 24/40 Joint on the top and bottom

Made of high quality glass

SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser.

COMMONLY USED ----A liebig condenser commonly used in a apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way adapter,a take off adapter to assemble a or reflux setup.

DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm

Glass Graham condenser

24/40 Joint on the top and bottom

Made of Borosilicate Glass

Glass Allihn condenser

24/40 Joint on the top and bottom

Made of Borosilicate Glass

Removable 10mm Hose Connection

24/40 Top Joint

24/40 Bottom Joint

The Dimroth condenser used as reflux condenser is more effective than liebig condenser, allihn condenser,graham condenser,coiled condenser.It provides larger cooling surface than the coiled condenser.Comparing to the graham-style condenser(liebig,allihn,graham),the Dirmroth condenser is Excellent for use with high vapor pressure solvents

An assembly of a reflux apparatus usually includes a Dimroth condenser,a round bottom flask,a drying tube,a separtory funnel or equalizing pressure funnel.If the flask is single-neck,a claisen adapter should be applied to provide an extra entry.If the flask is three-neck,the middle neck can be fitted a PTFE stirring shaft for better heating performance.

The coil style Dimroth condenser designed with tightly wrapped coil,jacket with an O.D.of 40mm while coil with an O.D.of 8mm , providing larger cooling surface than HMC010603.It has a 24/40 top outer standard taper joint and lower inner drip tip joint.Hose connections have O.D.of 8mm or 10mm at the largest serration.The coil length is 175mm,overall height is 350mm

Reflux Coiled Condenser

125mm In Coil Length

With 24/40 Joints

330mm Height

24/40 Top Joint

24/40 Bottom Joint

This experiment equipment can be a practical and helpful way to introduce kids to operate the experimental equipments and have the experiments. lab glass condenser

This condenser pipe is perfect for home education, chemistry lesson and laboratory use. lab condenser

It can improve kids imagination and hands- on ability through interactive play. lab condenser pipe

The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer

With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°

The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size

Package Weight: 12.0 lbs

Product Type: Lab Supply

Package Quantity: 1

The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer

With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°

The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size