Best Dirt Bike License Plate Light Assemblies in 2026

Sealed light assembly Led Marker Clearance Light.

Amber, rectangular light functions as clearance, side marker light.

Functions as both a clearance and side marker when mounted at a 45 degree angle.

Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on; Truly many customers use them as boat marine lights, very bright;

Package includes 1 set LED Tail Lights Assembly Kit, compatible with 1976-1983 CJ5 tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1997-2006 Wrangler TJ tail lights. Driver Side and Passenger Side are included. Come and replace your dim factory tail lights with our brilliant LED tail lights assemblies and get eye-catching;

This rear combination tail lights kit feature 12 large brake, parking and directional LED's, 6 license plate light LED's, 21 brilliant white Back-Up LED's and 3 side reflector light LED's;

Partsam LED lights are a direct replacement for your stock tail lights. These rear LED lights are completely compatible with your electrical system, and the wiring tips are as below: White is ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light and red wire is for stop turn brake light;

This Listing includes 2Pcs Bright 35 LED Tear Drop Tail Lights (some customers DIY it as saddle bag lights) with Red Lens and Stud Mount Chrome Bezels. We add nuts to the package according to customers' suggestion.

Unit is supplied with 3 wire plugs for ground, brake/turn and tail light. (Black wire - ground, White wire is low brightness and Red wire is high brightness). if your stock part is the same as ours, you can make it plug and play, however, if the different plug, you need to cut the plug and rewire it; Note: if the taillight and stop light function properly, but the turn signal does not, please replace your existing flasher unit with an LED compatible flasher unit.

Light is secured by the 2 studs (5.21" apart) on the chrome bezel; Two Screws are included for mounting;

Package includes 2Pcs Universal Square 12V Combination 38 LED Signal Tail Light; Each one is equiped with 38 Super bright LEDs: 16 Red LEDs for stop/turn/tail functions, 18 White LEDs for backup function, 4 White LEDs for license illuminator; Both are set up for license plate lights as well as reverse lights;

These rear combination tail lights have studs on back sticking out will bolt to any flat surface; This is not a replacement for Wrangler YJ CJ JK tail lights, not factory mount. If you want to install it on wrangler trucks, you may need some modification: There is no wiring harness so you have to splice the wires yourself. Also, The bolt holes are larger than stock so you will need to drill out your body to make them fit. The entire assembly is a touch larger than stock as well;

DOT Compliant for street legal lighting. 12 volts; Low ampere draw; 3-stud mount design is easy to install on any vehicle exterior and the distance between the mounting blots is 2" ~ 2.2"; Resistant polycarbonate housing and acrylic lens provide weatherproof protection against water, shock & vibration;

Package includes 2Pcs Smoke Lens Square 12V Combination 38 LED Signal Tail Lights for truck trailer boat pickups SUV RV VANs flatbed trucks etc. 38 Super bright LED's (16) Red for stop turn tail functions, (18) white LED's for backup function and (4) white LED's for license illuminator. Both the two trailer combination tail lights have the license plate illuminator;

These rear combination tail lights have studs on back sticking out and will bolt to any flat surface. Also This is not a replacement for factory mount Wrangler TJ YJ CJ JK tail lights. If you want to install it on wrangler trucks, you may need some modification: You may have to splice the wires yourself. Also, The bolt holes are larger than stock tj tail lights so you may need to drill out your body to make them fit. The entire assembly is a touch larger than stock yj tail lights as well;

These wrangler tail lights hardwired with 4-Wire molded harness: White wire for ground, Black wire for tail light and license plate light, Red wire for stop turn tail lights and Yellow wire for reverse or backup lights; This rear tail light is universal fit for 12V vehicles & trailers including trucks, short and extended trailers, RVs, boats, vans, buses, flatbeds trucks and more;

High Compatibility-Direct replacement for all T10 wedge type W5W W3W 147 152 158 159 161 168 184 192 193 194 259 280 285 447 464 501 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825 PC 175 2886X.

Brighter- each T10 LED light bulbs with 10 x 3528 SMD chipsets LED, much brighter than regular LEDs with high power chips, ideal replacement for dull and yellowish stock bulbs

Long Lifespan- Built in quality high power beams, provide 20000 working hours long lifespan for the led bulbs.

[High-quality Led Tail Light] Each is equipped with 26pcs LED lights inside, including 12 red square LEDs (Stop, Turn, and Tail), 4 white square LEDs (Back-up, Reverse), 4 red 2835 LEDs (Side Marker), 6 white 2835 LEDs (Only one side has License Plate Light).

[Easy Installation] White wire is the GROUND; Black wire is red light, low brightness, and function as tail/side marker/license plate lights; Red wire is red light, high brightness, and function as stop/brake light; Blue wire is white light and function as a reverse light.

[Functions] Stop, brake, turn signal, tail, reverse/backup, side marker (not just a side marker reflector!), and license plate light for most 12V vehicles like Trailers, Trucks, SUVs, RVs, Caravan, Vans, etc.

[Brighter Than Stock Tag Light] Built-in high power 2pcs 2835 LED chips, super bright light output makes your license plate clear at night.

[Fully Sealed and Waterproof] This license plate lamp has passed the waterproof test, has a high-quality PC lens, ABS housing processed with ultrasonic treatment, is anti-scratch, not faded with long-time exposure, and can adapt to all kinds of extreme weather, has no moisture inside after heavy rain or car wash anymore.

[Easy Installation] 2-wire connection, white wire is the ground (negative), and black wire is positive.