Best Moesgo Light Switches in 2026

Innovative – Provides a convenient ON/OFF switch for indoor settings to help meet lighting and other needs

Compatible – Works with lamps and other small electronics that have no ON/OFF switch or are hard to reach

Efficient – This unit is UL listed and features an electrical rating of 15A/120VAC/1800W and draws zero power in the OFF position

Repair or Replace – Fix old or broken rocker switches in your bedroom, kitchen or work space with the GE Grounding Paddle Rocker Switch 5 Pack

3-Way – For use with permanently installed lighting fixtures controlled by one or two switches

Colors – Available in white and light almond to best complement your existing wall plate

Repair or Replace – This grounding toggle switch is the perfect solution to repairs or replacements around home. Whether you’re a general contractor or a DIYer, this unit will make upgrading your bedroom, kitchen, office or other space a breeze.

Easy Installation – Whether using the proprietary Pressure-Lock wiring system or utilizing the traditional screw terminals, wiring this toggle switch is quick and easy.

Complementary – The light almond finish provides this unit a sophisticated appeal and make it the perfect accessory to any new build or an easy upgrade that is sure to enhance your existing décor.

NOTE: The grey area is not the dial.The turnable dial is in the middle.

Schedule your lamps, fans, appliances, seasonal lighting, AC units and other devices ON and OFF at your set desired times saving you energy and deterring crime when you are away from home

The timer allows you to set on and off times at 30 minute intervals for a total of 48 On/Off options that will cycle daily without having to reset

Transform— Take a one-switch light and turn it into a dimmable lighting fixture for home or office

Energy Savings – Save some cash on energy by reducing the light level in your indoor or outdoor lights with this light dimmer

Lighting Options – Use the rotary dimmer for permanently installed lights with dimmable LED and CFL bulbs rated up to 150 Watts and incandescent bulbs up to 600 Watts

Lighting Control – Conveniently control and dim indoor lamps, lights and seasonal décor with this wireless remote and plug-in receiver featuring 1 polarized outlet – offers full range dimming when used with dimmable bulbs

Wireless Remote – The wireless remote provides ON/OFF and dimming operations up to 150ft. from receiver; 1 CR2032 battery is included to power remote

Wall Mount – The remote doubles as a wall-mounted switch (hardware included) or fits existing multi-gang locations (wall plate not included)

Product 1: LED strip lights that work with Alexa and Google: Directly connect these LED lights to your Google Assistant or Amazon Alexa for voice control. These LED light strips with voice control will help you create your smart home

Product 1: Easy to install LED lights strip: These smart lights bend around corners and adhere to surfaces with removable tape, helping make your house a smart home. These smart LED light strips can be trimmed to your desired length and linked with extensions

Product 1: Manage your smart lights away from home: Get added home security and convenience by controlling your LED lights with the Cync App for iOS and Android, so you never come home to a dark house

Push-button operation – Six presets turn on connected equipment for five minutes, 15 minutes, 30 minutes, one hour, two hours or four hours

No neutral – Replaces single-pole switches in switch boxes with no neutral wire required, which is perfect in older homes as well as in new construction

Wallplate included – A white wallplate for quick, single-gang installation is provided, and the in-wall timer fits rocker-style wallplates in multi-gang setups

VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.

VERSATILE DIMMING OPTIONS – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.

3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.

WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations. By connecting directly to the smart device, the add-on mirrors its functions. This feature allows you to dim lights, adjust fan speeds, turn fixtures ON/OFF and more based on the capabilities of the primary smart device. While the add-on switch is not a stand-alone device, it provides continued use of your favorite smart-device functions from multiple locations.

ADVANCED DESIGN 2ND-GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for breakoff tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.

ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch.

Wireless control over any outlet, easily control on/off functions of Lighting in hard to reach places

CFL, LED and incandescent compatible. Amperage is 12(amps)

Decora remote light switch mounts anywhere, mounting bracket provided, no wiring needed

Upgrade your smart home: Compatible with Google Home and Alexa (sold separately), smart plugs from Cync make your traditional devices smart by providing voice and app control at all times, even when you are out of home.

Smart outlets make any electronic device smart: The Cync smart plug makes any lamp or electric device smart, so smart plugs and devices respond to voice commands as an entire smart home system.

Control smart plugs while away from home: Get added home security and convenience with the ability to control your electric devices away from home with these Wi-Fi outlets, so you never worry about leaving your iron on or coming home to a dark house.

Spring-wound timer counts down to shut off at desired time. Up to 60-minute countdown at 1-minute intervals.

Ideal for use with lights, exhaust fans, heaters, pumps and other appliances.

Easy to install – NO NEUTRAL WIRE needed. Directly wire this timer into a standard light switch (standard toggle or decorator plate)

2 Pack: Automate a lamp, seasonal lights, or small appliances – saving you time, money and energy

Turns light source on/off at any desired times daily – 24-hour daily cycle

Programmable in 30-minute intervals with multiple daily settings

Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch; supported by major-brand bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more; not compatible with smart lighting fixtures;interruptor dimmer

Features an easy-to-use slider for full-range dimming; to turn the light OFF, move the slider all the way down until it clicks

Side dial allows for user-friendly fine-tuning controls; adjust the lowest dimming level to stop light bulbs from flickering

Transform – Take a one-switch or two-switch light and turn it into a dimmable lighting fixture for home or office with this 2 pack

Energy Savings – Save some cash on energy by reducing the light level in your indoor or outdoor lights with this light dimmer

Lighting Options – Use the push button rotary dimmer for permanently installed lights with dimmable LED and CFL bulbs rated up to 150 Watts and incandescent bulbs up to 600 Watts

Motion-detection zone of 150 degrees with a range of up to 30ft. covers even large rooms

Occupancy mode automatically turns lights ON/OFF based on movement in the area

Vacancy mode allows you to turn on lights manually and shuts them off automatically

LIGHT FLICKERING? – The 52327 Direct Lighting Bypass (ASIN: B08ZJQV7W2) is designed for Jasco, Enbrighten, UltraPro, GE-branded and Honeywell Z-Wave smart dimmers but may improve performance of other Z-Wave or Zigbee dimmers to prevent light flickering.

Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever.

QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.

Control – Dim and brighten the room as you wish with the easy slide dimmer 2 pack that allows for full light range control. NOTE" Our dimmers are not compatible with the “torch star dimmable lights”.

Sleek – White color adds clean and elegant look to accentuate existing décor

Multi-Function – Use with both single pole (light controlled by one switch) and three-way applications (light controlled by one or two switches)

IMPORTANT: Must have Neutral Wire for this to work, please check your wiring prior to purchasing. Requires a Z-Wave certified Hub

Affordable 3-Way Solution: Work with regular 3-way switches, no special companion switch needed! Can be used with a regular ON/OFF (non-smart) switch (NOTE: "Non-Smart" switch has to be an On/Off 3-Way, not a Dimming 3-Way). Couldn't work with an add-on switch! Only supports single-pole and 3-way circuit, not support 4 way!

PROVIDES BEST DIMMING CAPABILITIES, works with most popular dimmable LED bulbs (including Cree, Ecosmart, Philips, GE, Sylvania, Sunco, and others)

The switch enables you to wirelessly control to turn lights on and off, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day.

Features one always-on pass-through AC outlet and one Z-Wave enabled outlet.

Space-efficient, side-plug design does not block lower outlet or obstruct placement of furniture.

Automate lamps, seasonal lighting, or small appliances like portable fans – saving you time, money and energy!

Turns lighting on and off at different times daily (7-day programmable schedule) -up to 16 settings per day.

Features 1 polarized outlet and a convenient override switch to manually control the plugged in lamp or appliance.

"ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).

Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).

The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day.

Outdoor timer for security, landscape, patio or seasonal lighting – saves you time and money

Twist the dial on the timer to your setting of choice and that setting will repeat on a daily cycle

Multiple Settings include – Always On, Always Off, Countdown (2, 4, 6, or 8-hour options) or Automatic On at Dusk, Off at Dawn

It is GE 100A Outdoor Double Pole Double Throw Safety Switch

Power Between 2 Electrical Sources Electrical Utility

Generator Source For Homes Or Light Commercial Applications

Impact-resistant face and back body

GE Lexan high impact-resistant lens

External screw-pressure-plate back and side wired. Accepts #12 and #14 AWG

Product 1: VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: Smart Things, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivian, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more

Product 1: ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups

Product 1: VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device

Push on and rotate for full-range light control

For Incandescent bulbs only. Not for use with dimmable LED and CFL bulbs

Built-in light helps you locate dimmer in a darkened room

Decorator style direct replacement for a standard light switch

LED light shows switch location in a dark room

Easy, 2-wire installation, no neutral needed

Adjust light levels to reduce energy costs

For use in permenantly installed single-pole applications

For use with incandescent, dimmable cfl and led lighting