Best Straight Long Drill Bits in 2026

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

135° split point tip prevents drill from walking

Round shanks allow use with a wide variety of tool holding systems

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

135° split point tip prevents drill from walking

Round shanks allow use with a wide variety of tool holding systems

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

135° split point tip prevents drill from walking

Round shanks allow use with a wide variety of tool holding systems

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

135° split point tip prevents drill from walking

Round shanks allow use with a wide variety of tool holding systems

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools

Round shanks allow use with a wide variety of toolholding systems

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 30 different sizes including 1/16, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", one piece for each size and a adapter.

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8"

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses.

[SIZE LIST] 13 different sizes including 1/16", 5/64", 3/32'', 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64'', 7/32", 15/64" and 1/4", one piece for each size

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools

Round shanks allow use with a wide variety of toolholding systems

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

Size: 3/4, Material: High Speed Steel, Finish: Uncoated (Bright), Flute Length: 9, Overall Length: 12, Shank Size: 1/2, Shank Type: Round, Style: Extra Length, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand

Extra-length, for deeper holes

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point, and heat dissipation

Long length drill bits, also called taper length, have longer flutes and overall lengths than jobber drill bits

135-degree radius split-point is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges

Blade diameter:6mm;shank diameter:6mm;Overall Length:50mm;90 Degree point angle,2 Flute

Material:solid tungsten steel,Long tool life.

Most suitable for copper,iron,aluminium alloys,titanium alloy,mold steels under 55HRC(HRA78).etc.

Extra-length, for deeper holes than Jobber length

130-degree point angle, for centering and to reduce pressure on cutting edges

High-speed steel (HSS) containing cobalt is a combination of toughness and hardness, for use on drilling into hard substances

Long length drill bits, also called taper length, have longer flutes and overall lengths than Jobber drill bits

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

【SIZE】- Cutting Edge Diameter : 7mm / 0.28"; Shank Diameter : 7mm / 0.28"; Total Length : 350mm / 13.78"

【MATERIAL】-This twist drill bit was made by High Speed Steel and the hardness HRC is 62~63 which is harder and tougher to extreme loads,not easy to break

【ADVANTAGE】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Long length drill bits, also called taper length, have longer flutes and overall lengths than Jobber drill bits

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

Long length drill bits, also called taper length, have longer flutes and overall lengths than Jobber drill bits

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

Long length drill bits, also called taper length, have longer flutes and overall lengths than Jobber drill bits

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

Size: #2, Material: High Speed Steel, Finish: Uncoated (Bright), Overall Length: 4, Shank Type: Round, Style: Combined Drill and Countersink

Size: 15/16, Material: High Speed Steel, Finish: Uncoated (Bright), Flute Length: 13, Overall Length: 18, Shank Type: Round, Style: Extra Length, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point, and heat dissipation

Taper-length, for deeper holes

135-degree radius split-point is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges

Uncoated (bright) finish, economical and useful with a wide range of drilling materials

Long-length drill bits, provide long reach

118-degree conventional point angles, for general drilling applications

Parabolic long length drill bit has a drilling depth of 8 to 12 times its diameter, and has an extended flute and overall length to drill deeper and reach farther

Uncoated high-speed steel (HSS) provides hardness for wear resistance

Self-centering 135-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge