Best Uxcell Hex Shank Drill Bits in 2026

【Capability & Durability】 HSS construction enables drill bits of this impact drill bit set with high capability, durability and functional ability. The premium titanium finish improves surface hardness, rust and wear resistance. Durable titanium hex drill bit set that penetrates hard materials with ease and lasts a long time.

【Withstand Heavy Impact & Quick Change】 The 1/4 inch hex shank enables the titanium drill bit set to handle high torque transmissions and heavy impact. A dependable impact drill bit set to get the job done. These hex drill bits fit into quick change chuck system for rapid change of cutting tools.

【Fast Drilling】 The 135-degree split point tip prevents the titanium impact drill bit from walking for easy starts on contact. Precision fully ground parabolic flute form helps hex drill bits produce rapid chip removal to decrease friction and heat build-up. Durable impact hex shank drill bit set with sharp cutting edges that cut like butter on wood/metal.

Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #4 (7/64") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2326 drill bit set hex shank

Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood

Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills

Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits

Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Replacement tapered counter sinker drill bit set 3 Piece #6 (9/64") bit replacement Only (without the 4 Flute cutter countersink counter-bore), made to replace the 9/64” bits of #6 countersink drill bit set for wood. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills. All same size replacement tapered drill bit for drill countersink

FTG drill bit replacement set made with tapered countersink bits for wood. Countersink replacement bits set with tapered drill bits. Top Quality 9/64 inch tapered and double flute drill bit; HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2329 countersink replacement drill bit set for drill bits with countersink

THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits

Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use.

Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.

Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping.

【Process Treatment】 Titanium coated surface prevent rusting, which increase the hardness of the drill bit and reduces heat buildup, make the twist drill bit more wear-resisting for longer life.

【Twist Design & Performance】The 135° fast cutting point is automatically centered and penetrates quickly with less pressure, Prevent walking, clear chips and particles faster.

【 Flutes Form 】 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.

Bit Replacement made with Version 2.0 FTG Maximum Torque has superior connection drill-hex shank without a pin. Replacement tapered counter sinker drill bit set 3 Piece Same Size #4 (7/64") bit replacement Only (Without the 4 Flute cutter counter-bore), made to replace the 7/64” bits of #4 countersink drill bit set for wood

FTG drill bit replacement set made with tapered countersink bits for wood. Countersink replacement bits set with tapered drill bits. Top Quality 7/64 inch tapered and double flute drill bit; HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2326V2 countersink replacement drill bit set for drill bits with countersink

Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, professional FTG drill countersink set Maximum Torque Improved Version 2.0 without pin. Packaging set combination unique design protected by US Copyright Office

♛: FEATURES: Shank Size: Hex 1/4-Inch; Total Length: 65mm/ 2.56-inch; Bit Type: SL6/PH2; Surface Treatment: Sandblasting; Material: S2 Alloy Steel.

♛: PACKAGE CONTENT: 1Pcs x Slotted Head Phillips Screwdriver Bit; These Screwdriver Bits are with magnetic design.

♛: SUPERIOR QUALITY: Those Slotted Head Phillips Screwdriver Bits are made of S2 alloy steel, which is a commonly used material in hardware with high hardness.

Forstner Drill Bit: Drilling diameter: 80mm / 3.15"; shank size: 10mm / 0.39"; drilling depth: 54mm / 2.13"; total length: 86mm / 3.39". Thickened carbide cutter and solid hardened steel body, hex shank forstner bits for woodworking.

Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose

Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation

32 Pack Woodworking Chamfer Drilling Tool Set – Nice set of specialized bits useful in creating a nice finished effect for woodworking. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill.

7Pcs Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth.

8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well.

✅【Five-blade design】Each countersunk drill adopts five-blade blade design, which can reduce vibration and prolong life, achieve smoother drilling, with 1/4" metal hex.

✅【Compact Grinding】Precision grinding 82° tip for drilling holes on most medium hardness stainless steel, copper, aluminum, wood, plastic.

✅【M2 HSS Cobalt Layered Drill Bits】M2 Cobalt Coated, each metal countersunk drill bit is made of high quality M2 HSS material, this countersunk drill bit set is excellent in heat, corrosion and rust resistance to reduce friction and run cooler.

34 Pack Woodworking Chamfer Drilling Tool Kit Include – A integral set of wood working tools for professionals or beginners. Pecfect gift for fathers, friends, carpenter and DIY lovers. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill.

7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 2pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth.

8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well.

29 Pack Woodworking Chamfer Drilling Tool Kit with a Handy Plastic Case– A Versatile tool set that would make a nice gift for woodworker, Dad, DIY lover, home hobbyist. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill.

3 Pcs 1/4" Metric Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.

7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth.

Set of 21 short length drill bits includes inch sizes 1/16" through 3/8" in 1/64" increments

High-speed steel (HSS) provides hardness for wear resistance

Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials

✅【5% COBALT TWIST DRILL BITS SET】Made from M35 Cobalt Steel with Molybdenum and Cobalt added to form a hardened alloy, can measure up to 67 Rockwell hardness, cut faster, last longer, and last longer than normal HSS drill bits 12 times.

✅【13PCS SET COMBINATION】1PC×1/16", 1PC×5/64", 1PC×3/32", 1PC×7/64", 1PC×1/8", 1PC×9/64", 1PC×5/32", 1PC×11/64", 1PC×3/16", 1PC×13/64", 1PC×7/32", 1PC×15/64", and 1PC×1/4", one piece for each size, a drill holder with size index is included in the set for easy storage and organization.

✅【QUICK CHANGE HEX SHANK】1/4 inch hex shank is easier and safer to install in all power tools, especially for locking quick change chucks without slipping and falling off.

✅【MATERIAL】The countersink drill bits adopt HSS M2 grade 6542, with high hardness, wear-resisting, not easy to break, not easy to rust, and excellent cutting ability. Wood countersunk bit with wider groove shape to increase chip flow.

✅【SPECIFICATION】Four flute countersink cutter #45 carbon steel tapered countersink set #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32") adjustable wood countersink, 1/8" allen key hex wrench counter sinker drill bit for wood.

✅【DESIGN】 The 82-degree tapered twist bit cuts faster and produces smooth holes quickly and cleanly. Adjustable countersunk bit mass Built-in depth adjustable countersunk hole connected to the handles of 2 hex screws that control the depth of the pilot hole.

Size: 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'')

Material: Constructed with high speed steel, this bit has the durability to withstand high-heat conditions for lasting use

removes Chatter&Vibration: 5-fluted design removes chatter and vibration for smooth operation

Product Name : Self Centering Hinge Drill Bit;Material : HSS

Color : Silver Tone;Drill Holes Dia : 2mm/5/64",2.8mm/7/64",3.5mm/9/64",4.5mm/11/64"

Hex Shank Size : 6.3mm/ 1/4";Total Length : 85mm/ 3.3",87mm/ 3.4", 95mm/ 3.7", 97mm/ 3.8"

Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Features -- Total Size: 400x13mm/15.7 x 0.51-inch(L*Max. Dia.); Bit Type: 1/4''-Hexagon; Material: Metal.

Size -- Connection hex shank drill site size (6.35mm) (1/4) 0.25-inch; Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25-inch.

Material -- This flexible shaft is made of carbon steel and plastic which make it practical and durable.

Diameter 6mm 1/4 Inch,diamond length 8mm,Quick-fit Hex Shank,fit a variety of quick-change chucks.

Multi-purpose for drilling of hard materials especially tiles, porcelain, granite, ceramic, glass, mirror, marble, stone, masonry, brick (not for wood)

Wax are inserted to the diamond drill bit for cooling and lubrication without adding water. Designed with hole and groove in the side of drill bit for removing stone chips.

13pcs Drill Bits Include: 1pcs of each size( 1/17", 7/89", 6/61", 11/93", 12/95", 4/29", 14/89", 14/79", 17/90", 13/66", 21/97", 17/72") drilling dia M35 straight hex shank twist drills, can accommodate a wide range of drilling needs.

M35 Twist Drill Bit: Made from M35 cobalt material which has the characteristic of high hardness and durability. The cobalt material gives the bit superior wear resistance and overall toughness, making it great for long-term use in a variety of drilling applications.

Quick and Clean Drilling: The external point angle design of this cobalt twist drill bit allows for fast and efficient drilling, with effective chip removal to prevent clogging, perfect for a range of materials including metal, wood, and plastic.

Package Content: 1 Set x Hex Shank Twist Drill Bits(1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5mm, total of 13pcs)

Material: Twist Drill Bit Set made of High Speed Steel, high hardness, good wear resistance and durability

Surface Treatment: This High Speed Steel Drill Bits surface Titanium coated, which increase the hardness of the drill bit and reduces heat buildup, make the twist drill bit more wear-resisting for longer life

Shank Type: 6.3mm Hex Shank; Material: HSS 4241 with Titanium Coated; Drilling Diameters: [6 Steps]: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"; [9 Steps]: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; [13 Steps]: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2".

This step drill bit is durable and strong enough to punch and drill clean holes in materials like metal, wood, etc.. It can also help to enlarge existing holes and clean edges.

It is Great for drilling holes for iron, metal, aluminum, copper, wood, plastic, PVC board and many other types of sheets.

99pcs Drill Bits Include: 11pcs of each size( 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/35", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 3/64", 3/8", 25/64", 13/32", 27/64", 19/32", 29/64", 15/64", 31/64", 1/2") drilling dia M35 straight round shank twist drills, can accommodate a wide range of drilling needs.

M35 Twist Drill Bit: Made from M35 cobalt material which has the characteristic of high hardness and durability. The cobalt material gives the bit superior wear resistance and overall toughness, making it great for long-term use in a variety of drilling applications.

Quick and Clean Drilling: The external point angle design of this cobalt twist drill bit allows for fast and efficient drilling, with effective chip removal to prevent clogging, perfect for a range of materials including metal, wood, and plastic.

HSS 6542 DRILL - High hardness drill,prefect for metal,thin stainless steel,aluminum,wood,plastic,DIY.

Multifunctional - Can be used for drilling, tapping, cutting.

Titanium Coating - Can effectively extend the service life of the bit and reduce bit wear.