Best Metal Magnetic Drill Presses in 2026

Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel

Includes a 1/2-inch keyed chuck and onboard key storage

Operates at 5 different speeds: 740, 1100, 1530, 2100, or 3140 RPM

ACCURACY: The built-in depth micrometer allows for micro-adjustments and the brass shaving ejection port ensures a clean trim

EASE OF USE: The universal collet system indexes on case shoulders for precise and consistent trimming

VERSATILITY: Works with almost any 1/2 inch drill or drill press and the adjustable collet system works with all case body collet shouldered cases from .17 Remington to .460 Weatherby, is not compatible with straight wall cartridges

DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws.

TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm).

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

Compatible with most drill Accessories up to 3/8”

Designed with a minimum reach of only 4”

Handle length of 4. 25” for complete control

Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 1100W copper motor. It is capable of drilling into toughest materials at 550 RPM. Maximum Coring Diameter: 1.57'' (40 mm); Maximum Coring Depth: 5'' (125 mm). Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits.

Premium Coring Bits & Cooling Pot: There are 11 chisel bits: 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 21mm, 23mm, 24mm, 26mm, 27mm, meeting a variety of demands for coring. Also, we provide you a rust-proof stainless steel cooling pot and a pilot pin. The pilot pin can remove screws and assist in the installation & removal of bits.

12,000 N Magnetic Force: The powerful two-stage magnet can generate 12,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom.

4.1 amp induction motor for quiet, smooth performance

5 speed gear box

5/8" chuck handles larger bits

Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 980W copper motor. It is capable of drilling into the toughest materials at 680RPM. Maximum Coring Diameter: 1.38"/35mm; Maximum Travelling Distance: 4.92"/125mm. Besides, our magnetic drill can only be used with hollow boring bits, and annular bits less than 0.3"/8 mm in diameter.

Useful Accessory Kit: We provide you a rust-proof stainless steel cooling pot with the capacity of 21.36 Cubic Inch/350ml and a pilot pin. The pilot pin can remove screws and assist in the installation & removal of bits.

10,000N Magnetic Force: The powerful two-stage magnet can generate 10,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom.

BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale

ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position

POSITIVE STOP- built-in depth stop for accurate drill depth

Powerful 1.75HP/2HP high torque, direct drive dvr motor

SPEED range of 50-5500rpm variable speed for variety of projects (default is 50-3000rpm, option in settings to increase to 5500Rpm)

18" swing, 6" quill stroke, 2MT quill taper

Superior Performance ----- This heavy-duty ZELCAN electric magnetic drill press bores at 500 RPM up to 2" deep and 2" across; it is best used with the included standard core drill bit set, allowing you to create holes in most common sizes

Powerful & Durable Motor ----- Our portable drill press generates exceptionally strong power thanks to its 2.1 HP 1550W copper motor; its premium enameled wire withstands temperatures up to 428°F and makes your motor long lasting and wear resistant

Optimal Design ----- Despite its light weight and portability, our magnetic drill press anchors itself securely during use through its solid iron bottom which acts as a powerful 3500 lbf (15500 N) electromagnet at the flick of a switch

Drilling Capacity: 7/16"-1 1/2" - 2" depth

Comes with Free Chuck, Adapter, Oil Bottle, Safety Chain and Case

120V, 60Hz, 595 RPM

5 Spindle Speeds 620-3100 RPM. Versatile speed range for drilling into any type of material

Solid Steel and Cast Iron Construction. Rugged heavy duty construction for vibration-free operation

Depth Stop, Set your drill depth easily and accurately; great for repeatable drilling

Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 1100W copper motor. It is capable of drilling into the toughest materials. Maximum Coring Diameter: 1.57inches / 40mm; Maximum Travelling Distance: 4.92inches / 125mm. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits.

Stepless Speed & Cooling System: Our magnetic base drill bores at 200-550RPM. Taking advantage of the panel is beneficial to achieve stemless speed regulation of the drill press. Our coolant tank effectively helps your rig get rid of the overheating.

12000N Magnetic Force: The powerful two-stage magnet can generate 12,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom.

The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features.

Large 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on.

New - slot drive arbor for more accuracy and quicker change out of accessories, New - housing - stronger stiffer, more ergonomic, positive slug ejection.

POWERFUL AND EFFICIENT: Get superior performance with the Vevor Mag Drill Press. Its 1300W copper motor generates an exceptionally powerful driving force, allowing you to drill into tough materials at a speed of 810 RPM up to 1.57'' across and 2" deep.

STABLE AND FAST: The Vevor Magnetic Drill Press is designed for stability and speed. Its optimized internal structure enables faster drilling, while the 2922lbf / 13000N robust force created by the electromagnetic base on the two anchoring ends solidly locks the mag drill press in place, preventing movement during the drilling process. With this tool, you can drill with precision and speed.

ACCURATE AND SAFE: The Vevor Mag Drill Press is equipped with features that ensure precision and safety. Its frame comes with a scale that helps you judge drilling depth with ease, while the included coolant bottle with a quick push-fit tube connection ensures long cutter life and smooth drilling. With these convenient and safe features, you can drill with confidence and accuracy.

SUPERIOR PERFORMANCE: This heavy-duty electric magnetic drill press bores at 550 rpm up to 2" deep and 1.6" across; use the included standard drill chuck to conveniently hold your cutting tools and create holes in most common sizes

POWERFUL MOTOR: Our portable drill press generates exceptionally strong power thanks to its 1.5 HP (1100W) copper motor; its premium enameled wire withstands temperatures up to 428°F and makes your motor long lasting and wear resistant

SAFE OPERATION: Our lightweight magnetic drill press anchors itself securely during use through its solid iron base which acts as a powerful 2700 lbf (12000 N) electromagnet at the flick of a switch, while its coolant tank effectively protects your drill from overheating

Corded Electric

120 Volts

110 Pounds

Gravity-fed cooling lubrication

2-inchs depth of cut

Right or left hand feed handles

MA Basic 200 Portable Magnetic Drill is a powerful and reliable single-speed portable magnetic drill designed for continuous use

Compact, lightweight and portable; 12.25 Inches high, 27 Pounds

Cuts holes up to 1-3/8" dia. with annular cutters

Extremely compact with perfect power-to-weight ratio for work at height and in tight spaces

Reversible drill for tapping

2 speed machine for tapping

Rapidrill SLIM - Designed for Light metals, wood, and similar materials - Attaches to most standard hand drills that use round collar attachments.

Drill faster, easier, and safer - Additional leverage to drill up to 10X faster than hand drilling

Safely drill perfect holes overhead, sideways, or upside down - turns hours of drilling into just minutes

Suitable for drilling on any metal surface.

Motor: High-Speed, Induction, 1,350 W, 110 V, 60 Hz

Max Magnetic Force: 3,372 lbs. (15,000 N). Thinner metal will result in less force.

Made in Germany

World Class production facilities and techniques

Absolute focus on quality by our employees at every Stage of production

Mathews Engineering 1/2" Arbor Press Magnetic Pin Press Chuck Tool

Key-less 1/2 inch chuck with internal back stop (3/8" version also available)

Super Strong Neodymium Magnetic Base

The product is easy to use

The product is durable

The product is manufactured in United States

They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking applications

The oversized, massive drill heads have widely spaced bearing surfaces that provide full quill support throughout its travel

A wider range of operation speeds for drilling both large and small holes.

BLUEROCK Magnetic Drill BRM35A-B

Includes 2" Annular Cutter Set

Cutter 9/16"x2" 11/16"x2" 13/16"x2" 15/16"x2" 1"x2" 1-1/16"x2"

EFK-II Supply Pearl Drilling Machines Driller Drill Holder for Shell Coral Amber Stone Silver

We offer 2 bottles ( 10 bits/bottle) of extra drill bit with our pearl driller, please contact us for the size of drill bits you would prefer (diameter 0.5mm -2.5mm).

EFK-II Supply offers 3-5 days US domestic Free Shipping.

VARIABLE-SPEED: 1-1/2 HP motor has 12 speeds from 175 to 3,050 RPM.

REPETITION: 1/2"-diameter external depth stop, with three-nut locking feature, allows for fast adjustments.

ACCURACY: Depth stop has a quick-set bolt for fast, accurate adjustments.

2HP, 3Ph, 2 speed 230V motor

Tapping and reversing controls

3 power down feeds