Best 10 Marine Subwoofers in 2026

Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)

Green and Red LED Power Status Indicator - Low Pass Filter (50-150 Hz) - RMS Power : 300 Watts

Remote Level Control - Soft Delay Remote Turn-On - RMS Power of Amplifier : 100 Watts

8'' Slim Marine Woofer RCA Low Level Input High Level Input Green and Red LED Power Status Indicator Remote Level Control Phase Shift Switch : 0 or 180° Low Pass Filter (50-150 Hz) Soft Delay Remote Turn-On Thermal , Short and Overload Protection Circuits 14.5''(D) x 9.5''(W) x 3''(H)

HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual

LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source

HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual

LOW-LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low-level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources

Phase Switch: 0° or 180°, Low Pass Filter: 50Hz - 180Hz, Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz, THD: < 0.4%, Fuse Rating: Single 20A, Peak Power: 800 Watts, RMS Power: 200 Watts, Impedance: 4 Ohm,

Frequency Response: 20Hz - 180Hz, Signal to Noise Ratio: >90dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity, Low level: 300mV, Input sensitivity, High level: 1.0V, Dimensions (Inches): 13.6" L x 9.65" W x 3" H

High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BPS80 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BPS80 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Specs - Dimensions: 14.4” x 10.3” x 3”, Weight: 13.7 lbs.

Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product 1: Green and Red LED Power Status Indicator - Low Pass Filter (50-150 Hz) - RMS Power : 300 Watts

Product 2: 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters

Product 2: PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs

Product 2: SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions

Product 2: POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance

Product 1: HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual

Product 2: 300 WATT POWER: Let the music flow while you stay afloat with this 12v marine radio receiver by Pyle It features 300 Watt (75W x 4) peak power output and EQ configuration so you can control the bass, treble, balance, fader for a high quality sound

Product 2: BLUETOOTH CONNECTIVITY: stream audio directly from your hand held A2DP Bluetooth enabled device like iPhone, android, smartphones, iPad, tablets and play internet radio services like Pandora through your speakers with the help of this receiver

Product 2: HAND FREE CALLING: This boat indash console stereo receiver has a built in mic for answering calls and the telephone number is displayed in the LCD panel digital display Has a call answer / end button and redial last dialed number function

Product 2: DIGITAL FRONT PANEL: This black headunit receiver features digital LCD and crisp button and knob controls, Aux in, USB / SD slot and AM FM radio, located in the front panel It also has RCA line out jacks in the rear For marine vehicle / watercraft