Best Milwaukee Masonry Drill Bits in 2026

✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills

✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling

VERSATILE: For carbon steel, light gauge metal and hardwood applications

PREMIUM: Provides 2X life over standard impact drill bits

UNIVERSAL FIT: The TI9IM titanium drill bit set universally fits 90% of current drill/drivers including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Skil, Porter-Cable, and Craftsman

3/4" x 37” x 39" SDS Plus Drill Bit – long masonry hammer drill bit

High quality SDS bit designed to work in masonry applications; brick, stone, concrete, block, etc

Compatible with all SDS Plus sized rotary hammer drills; Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc.

10 PACK OF SDS PLUS ROTARY HAMMER DRILL BITS - 10 Pack of SDS Plus Masonry Drill Bits in the following sizes: 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)

CARBIDE TIPPED FOR HARD MATERIALS - These Masonry Bits Were Designed to Drill Through Tough Dense Material, Including Concrete, Cement, Brick, Cinderblock, Stucco, and Other Masonry Materials.

SDS PLUS SHAFT - Compatible with All SDS Plus Rotary Hammer Drills Including Dewalt, Makita, Bosch, Milwaukee, and More. PLEASE NOTE: THESE WILL NOT WORK IN STANDARD CHUCK

COMPLETE SET – This 20pcs set includes 20pcs sds plus drill bits, each delivering the durability and performance you need on all kinds of heavy duty brickwork

EXTRA STRONG – With their carbide composition and ultra-tough copper braised tips, these drill bits are able to chip away brick, tile, mortar, concrete and other tough materials with ease

RAPID ACTION – Each drill bit features a u-fluted design to enable rapid removal of drilled material

Set Includes: 12-piece drill bits in 4 groups of different lengths and sizes; 2-piece point chisels, 3-piece flat chisels, and one storage case.

High-Quality Bits: Cemented carbide YG8C provides outstanding hardness and durability, making the bits perfect for chipping off bricks, concrete, stones, and other masonry construction materials.

U-Shaped Flute Design: Each drill bit features a U-shaped flute to achieve quick dirt removal and keep the drill bit running smoothly and cooler.

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths

✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling

【Sturdy and Durable】The sds plus bits set made of 40Cr carbon steel and YG8 carbide tip, the drill bits are ideal for high impact applications.

【Universal SDS Plus Connection Design】The masonry drill bit set fit for Bosch, Hilti, Milwaukee, Makita, Dewalt drills and other SDS Plus drills.

【Perfect for Drilling Holes】Easy to drill holes with the hammer drill bits set on concrete, brick, stone and other hard materials.

[PACKAGE INCLUDED]: 13×Drill Bits, 1×Point Chisel, 2×Flat Chisel, 1×U-groove Chisel, A variety of sizes to meet your different needs.

[INDUSTRIAL MATERIALS]: 40Cr carbon steel, YG8 carbide tip, sturdy and durable.Premium carbon steel with heat treatment improves core strength for maximum durability and extended life.

[MULTI PURPOSE]:This set is perfect for working on concrete, masonry, wall, bricks, stone and road.

SDS-PLUS DRILL BITS SET: Includes 7 commonly used hammer drill bits with 5 mm, 6 mm, 6 mm, 8 mm, 8 mm, 10 mm, 12 mm(approx. 3/16", 1/4", 1/4", 5/16", 5/16", 3/8", 1/2").

CARBIDE-TIPPED MASONRYCONCRETE BITS SET: Carbide-tipped bit heads are harder, tougher and more resistant to extreme loads for longer tool life. The SDS Plus drill bit will drill holes in concrete faster and easier.

MULTIPURPOSE: Concrete drill bits set is fully compatible with All SDS-Plus Rotary Hammer Drill, like BOSCH, Dewalt, Milwaukee, Hitachi, Hilti, MAKITA, etc.

What Including: 7-Piece SDS Plus drill bits (1/4” X 4”, 9/32” X 4”, 3/16” X 6”,1/4 X 6”, 5/16” X 6”, 3/8” X 6”, 1/2” X 6”) for drilling concrete, masonry, wall, bricks and stone, etc. 1 wide flat chisel (1-5/8x 6”) for removing shavings, 1 gouge chisel (9/16” x 7/8” x 6”) for cutting curves and hollows & 1 point chisel (9/16” x 6”) for cutting through and breaking down bricks and stone

4-Cutter Carbide Tips: Made of DD alloy carbide (HRA89.5-90.5) to maintain cutting edge hardness and deliver 4x working life, more durable & sharper, drilling faster than 2-cutter tips. Tips’ surfaces are processed by shot peening for removing oxide and other impurities to achieve smooth appearances

U Flute Design: U-shaped flute design is for dust removal and drilling faster on concrete, brick, block, stone, masonry and granite. Besides, the wider and deeper U-shaped flute design delivers increasing drill bits’ life time and drilling efficiency, cleaning debris out fast and reducing bits’ stresses

Enhanced 4-flute design reduces stress and helps the bit run cooler, and for fast dust removal.

The concrete drill bits are tipped with durable YG8C tungsten carbide and with 40Cr carbon steel body. They are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry.

The wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer.

Carbide Tipped: Carbide-Tipped bit heads more stable, harder, more durable, extra-long tool life. The SDS PLUS drill bit will drill holes in concrete faster and easier.

Special Flute Design: The wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer.

SDS Plus Shank: The shank has two types of grooves (TOTAL OF FOUR). The smaller grooves fix bit in the chuck. The larger grooves allow bits slipping in the chuck when working, enhancing the drilling torque and hammering energy.

Carbide tipped for longer bit life

Wide roll forged flutes for longer useful drilling length and rapid dust removal

Resharpenable for extended bit life

The product is a 10-Piece rotary hammer drill bits set.

4-cutter instead of just 2-cutter: harder, tougher and more resistant and durable under heavy loads, for longer life and faster and easier drilling

Optimized brazing and hardening process, wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer.

Hex shank design allows for quick and convenient bit changes

For use drilling holes in masonry

1/4" Hex shank for direct use in impact drivers

Carbide tipped for longer bit life

Wide roll forged flutes for longer useful drilling length and rapid dust removal

Resharpenable for extended bit life

Package and Size: 10 piece. Diameter Size 5/16 inch, Total Length 6 inch.

Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block.

Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling.

Designed to drill holes on concrete, brick, mortar, and stone.

Bit Lengths: 4-3/8 in., 6-1/4 in., 8-1/4 in., 10-1/4 in., 17-3/4 in.

Bit Diameters: 1/4 in., 5/16 in., 3/8 in., 1/2 in., 9/16 in., 3/4 in., 9/16 in.

NEW MAKITA Premium Masonry Bit 3/8"

6" long and will drill 4" deep

Will fit all hammers taking the SDS PLUS type shank

Bundle Include: A -- ZELCAN SDS max to SDS plus adapter for rotary hammer drills, 40cr steel SDS plus drill chuck conversion tool for SDS max demolition hammers, power drill accessory for SDS plus bits and chisels, silver. B -- These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, compatible with Bosch, DeWalt, Makita, Milwaukee, Hilti, or any other.

A1 -- This SDS Max to SDS Plus adapter by Zelcan is crafted from high-quality chromium steel, drop forged and heat tempered for superior dependability, performance, and longevity. Our Max to Plus adapter's shank fits perfectly into any hammer drill able to use SDS Max shanks regardless of manufacturer, as they're compatible with Bosch, DeWalt, Makita, Milwaukee, Hilti, and many more.

A2 -- Our drill chuck adapter locks in quickly and easily to let you expand the use of your SDS Max hammer drill to use SDS Plus accessories and cover a broader range of tasks without needing to lug two power tools around; for safe and efficient operation, limit your drill speed to 800 rpm when working with 20 mm or smaller drill bits. In addition to its heat treatment, this SDS Max to SDS Plus adapter is also sandblasted and treated with anti-corrosive oil to give you years of dependable use.